SPL REPAIR OF BLDG NO P-11 OR LIVING AND TIOLET CUM BATHROOM OF BLDG NO P-09(OTM ACCN) AND PROVN OF CAR PARKING SHED JCO/ OR OTM ACCN UNDER AGE B/R-I OF GE (N) MAMUN

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.50 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed.

S&F Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x100 mm (double rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant, fixed in position with and including MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: (i) For WPC solid door/window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. (ii) Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately).

M&L 20 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface of floor finished even and smooth using WPC liquid as per manufacturer instruction or @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately) including taking down all as specified and directed

M&L for preparation of surfaces and apply first coat fiber reinforced elastomatic liquid water proofing membrane formulated with PU hybrid ploymersand reinfoecing acrylic fibers with sun reflective index(SRI) of 100-110 having maximumelongation of 350% tensile strength od 2.9 Mpa and shall have crack bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic presure and reduce surface temprerature upto 10 degree celsius with 33% ditution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 grm/sqm and pastinf it properly with overlaping of 50mm and allow it to dry, Apply second coat of undiluted coat @ 0.45 ltr/ Sqm . Apply third and final coat undiluted @ 0.45 ltr/sqm complete application to be done by the manufacture of authorised applicator complete all as specified and directed.

Note for item No 07 :- (a) Cleaning of dust, removal for all loose existing bituminous material manually with heat torch gun to get smooth plain finished surface, removing of vegetation/plantaion with no loose material on surface. (b) Conduct ponding test after 7 days, continnue curing of 14 days. (c) All Shifting/ removing of any wire/cable/AC unit/Water tank of any capacity or other any object as per site requirement an re-fixing the same, if needed shall deemed to be included in the quoted rates by the contractor. (d) Removal of any loose/packed items such as mud phuska, terrace tiles, cement screed bed shall be removed and surface shall be made free from depressions before applying treatment to the roof. Quoted rates shall deemed to be included this fact into account and no extra payment shall be made on this account. (e) Contractor shall verify availability of the materials in full qty from market before quoting the rates as no extension of time on this ground shall be granted. (f) All the sample/ make for water proofing material mentioned in item shall be got approved from the GE before procuring bulk quantity of material.

S&F Stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares not exc 0.50 Sqm in each pane including hacking out old broken glass complete all as specified and directed.

S&F 3mm thick frosted/pin head glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges (as per sample) complete all as specified and directed.

S&F aluminium anodized barrel tower bolts 200 mm of extruded section (as per sample) fixed complete all as specified and directed.

S&F 100 mm size aluminium alloy handles, febricated type extruded section (as per sample), complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section (as per sample), complete all as specified and directed.

S&F in repair Peg set of Six fixed with chromium plated brass screws and wooden and plastic cleats(min wt 190 gm) complete all as specified and directed.

S&F in repair 25mm bore mild steel powder coated, single curtain rod (walls thickness not less than 1mm) including fancy type PVC owder coated brackets, fenials etc (as per sample) suitable for single curtain rod complete all as specified and directed.

Dismantling of brick work built in cement mortar including all quoins, arches, pillars etc and removal of debris/rubbish off the premises etc complete all as specified and directed.

M&L for Brick work with fly ash bricks (Old Size bricks), sub class'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:4 complete all as specified & directed.

Brick work with old servicable bricks retrieved from dismantling, straight or curved on plan exc 6 mtr mean radius built in CM 1:4 complete all as specified and directed.

M&L Brick work with old servicable bricks retrieved from dismantling, straight or curved on plan to any radius in half thick walls,built in CM 1:4 complete all as specified and directed.

M&L Brick work with fly ash bricks straight or curved on plan to any radius in half thick walls,built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5mm thick cement plaster on fair faces of brick work, concrete sruface in cement mortar (1:3) as in ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work, concrete sruface in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering or plastering 10 mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections, drainge etc, making the edges in line, in true shape and finishing the surface without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of external wall and chajjas, making surface smooth using sand paper, priming the surface with alkali resistance primer paint for external surface, applying two coats of cement base paint including curing complete all as specified & directed.

M&L for preparation of new/ old wall surface, making surface clean, dry, free from any loose paint film, dirt, chalk, grease, fungus and algae etc and applying one coat of antifungal acrylic emulsion exterior weather proof paint complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old plastered surface of walls and applying two coat of white wash complete all as specified & directed

M&L for preparation of old surface after complete removal of existing treatement 2mm thick wall care putty and making the surface even and smooth and applying two coats of oil emulsion distemper over priming coat complete all as specified & directed.

M&L for preparation of old plastered ceiling surface and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old surface after complete removal of existing treatement making surface smooth and applying two coats of cement base paint over a coat of alkali-resistant priming paint complete all as specified & directed.

Demolition of cement concrete (unreinforced) of any description and in any position and removal of rubbish beyond MOD land complete all as specified and directed.

M&L for PCC type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub floors, sub bases, floors and pavings etc complete all as specified and directed.

Dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:4) all as specified and directed .

M&L for glazed ceramic coloured tiles in vertical surface 450x300x7mm & 300x600x7mm set and jointed (joint free) in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and directed.

M&L for green/black marble work 12-15 mm thick (table rubbed and polished) in cooking plateform, window cill, steps, stair case trade & riser etc in cement mortar (1:4), pointed in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing of pipe 15mm bore complete all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing of pipe 20mm bore complete all as specified and directed.

S&F 15mm bore mild steel tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.

Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc complete all as specified and directed.

M&L for cutting chases, pinning in brick work, making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth complete all as specified and directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed to walls, floor, ceiling etc complete all as specified and directed.

Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with new all fittings short pieces and fixed complete to walls, floor etc all as specified

S&F in repair 15mm bore dia angle valve / stop valve cast copper alloy capston head chromium plated, fancy type ISI marked with crutch or butter fly handles screwed down, screwed for iron pipe complete all as specified and directed.

S&F Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch lever handle screwed both ends for iron pipe 15mm bore dia fixed in repair, complete all as specified and directed.

S&F in repair bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated complete all as specified & directed.

S&F in repair Vitreous china wash basin, white flat back, size 550 x 400 mm (as per sample), brackets, CP waste coupling and cutting for and pinning in ends of brackets or errecting stand including 32 mm dia waste pipe complete all as specified and directed.

S&F in repair 15mm bore pillar cock fancy swan neck type, screwed down high pressure crutch lever handle with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified & directed.

S&F in repair towel rail, brass, CP 600 mm long 20mm dia pipe of 1mm thick complete all as specified and directed.

S & F in repair brass CP Shower rose with or without swivel joints (any size) including fixing to steel pipe or union complete all as specified & directed.

S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide (as per sample) with chromium plated brackets double guard and railing 60cm long, complete all as specified and directed.

S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified & directed.

S&F in repairs Vitreous china wash down water closet pan pedestal pattern , white (excluding supply of flushing cistern and flush pipes, but including fixing thereof), including making connections to trap, and to flush pipe incl plastic seat and cover ( As per sample ) with stainless steel or aluminised hinging device and health foucet/jet spray complete all as specified and directed.

S&F in repairs vitreous china bowl urinal half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and union for discharge pipe including providing and fixing of PTMT urinal spreader with 15mm dia pipe, complete all as specified and directed.

PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified.

Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 mixed with water proofing compound to sunken portion with proper slope towards outside, finishing cement concrete or brick work surface even and smooth using extra cement, provide 90 micron polythene film duly applying bitumen coating @ 3.00 Kg/Sqm complete all as specified and directed. Note: WPC shall measured and paid for separately.

S & F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed.

PVC connection in repair 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

Rotational moulded polyethlene water storage tanks of capacity exc 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete and dismantling of existing PVC tank of any capacity complete all as specified & directed.

S&F 20 mm size gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed.

S&F in repair Cast iron, waste and vent pipes, sand cast, 100mm bore in any length with or without ears with cement joints, as in floor with all fittings complete all as specified and directed

S&F Cast iron waste and vent pipes sand cast 100mm bore in any length with or without ears with cement joints fixed to walls/in trenches with all fittings including taking down the unservicable pipe with fitting complete all as specified and directed

S&F in repair Cast iron, waste and vent pipes, sand cast, 75mm bore in any length with or without ears with cement joints, as in floor with all fittings complete all as specified and directed

S&F in repair Cast iron waste and vent pipes sand cast 75mm bore in any length with or without ears with cement joints fixed to walls/in trenches with complete all as specified and directed

S&F in repair 50mm bore cast iron soil, waste and vent pipes, sand cast, in any length with or without ears fixed to walls with clamps and cement joint complete all as specified and directed.

S&F in repair 100 mm bore Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair 100 mm bore Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed.

S&F in repair cast iron 100mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doors complete all as specified and directed.

S&F in repairs 75mm dia Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repairs 75mm dia Cast iron bends (any radius) diminishing pieces or tapers (larger bore measured) with oval access door complete all as specified and directed.

S&F in repair cast iron 75mm bore Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door complete all as specified and directed.

S&F in repair Cast iron floor trap 75mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified and directed.

S&F in repair Cast iron cowl of 50mm bore complete all as specified and directed.

S&F in repair Cast iron Swan necks (or offsets) upto 152mm projection for 100mm to 50mm pipe complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for( reinforcement cut as required to facilitate demolition) and rubbish off the premises, complete all as specified and directed

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified & directed.

Precast reinforced cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) , set in CM 1:4 as in slab for for water tank/shelf. landings, cover slabs (for man holes etc) chullah hoods, chajjas, water trough, managers, shelves & similar articles with palin faces complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Surface excavation not exc. 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Excavating in post holes (or similar holes) in soft /loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L steel iron base plate plugs, bolts and screws of Fe 410 -W (Gde E-250) quality A complete all as specified and directed.

S&F mild steel as in vertical posts, Roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow section square/rectangular) or flat sections including distance pieces complete all as specified & directed.

M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating ( zinc coating 275) GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa AZ-150 as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub floors, sub bases, floors and pavings etc complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidationand complete all as specified and directed.

M&L for 80mm thick machine pressed precast concrete interlocking paver blocks any shape and size conforming to IS 15658-2006 of M-40 grade with grey cement and mixed with pigment complete all as directed by Engineer-in-Charge.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with 1.2mm thick GI/MS pressed steel sunken boxes of adequate size, 3mm thick plastic laminated sheet cover fixed with brass screws including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. Note: 1) Conduit shall be fixed on surface/ceiling with necessay saddles where concealing of conduit is not feasible.

All as per Ser item No 97 but for one light point controlled by two 2 way switch.

All as per Ser item No 97 but for one 5/6 Amp socket outlet point on same board controlled by one switch.

All as per Ser item No 97 but for one 5/6 Amp socket outlet points on independent board controlled by one switch.

All as per Srl item No 97 but for one 15/16 amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor.

S&F switch piano flush button single pole one way 5/6 Amp 240 volts complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 5/6 Amps, flush type with shutters, 240 volts complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 5/15 Amp flush type, 240 volts complete all as specified and as directed.

S&F switch 15/16 Amps, flush type, 240 volts complete all as specified and as directed.

S&F switch piano flush button single pole two way 5 Amp 240 volts complete all as specified and as directed.

S&F ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals.

S&F stepped type electronic fan regulator flush type Socket type on the existing phenolic laminated sheet etc. not less than 100 W flush type complete all as specified and directed.

S&F Lamp holder jumbo modular type, PVC/Polycarbonate type with back plate complete all as specified.

S&F LED Lamp 12 watt 230 volts retfrofit suitable of any type lamp holder complete all as specified.

S & F for sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6 Sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 Sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including suitable size concealed rigid medium grade PVC conduit not less than 20mm dia 1.5mm thick with all accessories incl cutting chases on wall and making good to the disturbed surface of wall/floor with cement mortar 1:4 and finishes to match existing surface complete all as specified and directed.

S&F for SPN MCB DB 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar of rating not less than 100 Amps, neautral bar, earth bar and cable ties for cable management including polyuthrene gasket complete fixed flush in wall including cutting chases on wall for taking out old DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface complete all as specified and directed. Note: MCBs will be measured and paid seperately under respective items

S&F MCB, SPN, 240 volts, 50Hz, 10 KA of rating 32 Amps,'C' series complete all as specified & directed.

S&F MCB, SP, 240 volts, 50Hz, 10 KA of rating 5 to 32 Amps,'C' series complete all as specified & directed.

S&F in replacement VTPN DB 4 way sheet metal enclosures double door 415 V AC,50 Hz AC with IP-54 1K-09 protection suitable for wall including MCCB 160 Amps, 4 P, 16 KA with fixed magnetic and thermal setting of same make as of distribution board, making connection with suitable size aluminium thimbles & making good the disturbed surface to match with existing wall complete all as specified and directed.

S&F in replacement LED mirror light 1x10 Watt 2' feet prewired with all accessories including lamp complete with all accessories internely pre wired and including connection up with 3 core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repalcement surface mounted, bulk head LED luminaire 10 W with and integrated electronic driver with system luminous efficacy ≥ 100 lumens/Watt operating voltage 140V-240V, IP 65 protection complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting complete all as specified and directed.

S&F in repalcement of intenso LXS LED Batten 20 watt of size not less than 3'7", 6500 K, 230 volts, PF-0.95, CRI-80, life 25000 burning hours, wall mounted complete with all accessories internely pre wired and including connecting up with 3 core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement of LED street light 60 Watt, 230 volts with surge protection not less than 4 KV and 10 KV separate in the lighting housing, IP 65, Energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power LEDs as light source and electronic driver fixed on pole/wall along with service bracket as per sample, clamps, nuts, bolts, and washers including making electric connection with 1.5 Sqmm multistranded twin core aluminium conductor cable PVC insulated complete all as specified and directed.

M&L for Earthing complete with galvanised cast iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit alongwith angel iron 40x40x3mm frame and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 3 of SSR part I or directed and testing on completion.

M/S NARESH KUMAR SHARMA (BID ID -3423279)

GANDOTRA CONSTRUCTION CO (BID ID -3423544)

malghotra construction co (BID ID -3423000)

M/S CANTILEVER ENGINEERS (BID ID -3423117)

RD Engineers (BID ID -3423226)

M/S HIMANSHU BUILDERS (BID ID -3423734)

HARI OM ENTERPRISES (BID ID -3423136)