801387/E8 PROVISION OF ACADEMIC BLOCK WITH CAPACITY OF 12 CLASS ROOMS, PARKING SPACE FOR TRAINEES OF MTI AT TAMBARAM

Amount

GENERALSUMMARY NOTE: Schedule ‘A’ Part II to XI are prepriced by MES under Ser No. 2.00 to 11.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for “Site Clearance ” as listed in Schedule ‘A’ Part - II.

Lumpsum price worked out by the contractor for "Internal Water Supply" as listed in Schedule ‘A’ Part - III.

Lumpsum price worked out by the contractor for “Internal Electric Supply ” as listed in Schedule ‘A’ Part - IV.

Lumpsum price worked out by the contractor for “External Water Supply ” as listed in Schedule ‘A’ Part - V.

Lumpsum price worked out by the contractor for “External Electric Supply ” as listed in Schedule ‘A’ Part -VI.

Lumpsum price worked out by the contractor for “Road / Path / Culvert ” as listed in Schedule ‘A’ Part - VII.

Lumpsum price worked out by the contractor for “Sewage Disposal” as listed in Schedule ‘A’ Part - VIII.

Lumpsum price worked out by the contractor for “Area Drainage” as listed in Schedule ‘A’ Part - IX.

Lumpsum price worked out by the contractor for “Dismantling and Demolition” as listed in Schedule ‘A’ Part - X.

Lumpsum price worked out by the contractor for “ Compound Wall and Gates ” as listed in Schedule ‘A’ Part - XI.

Note:- Schedule ‘A’ Part I and XII is not prepriced by MES and prepriced rate indicated as 0.00 under Col.7 signifies this fact only. Bidder shall insert their rates in Green filed under Col-6.

SCHEDULE ‘A’ PART - I BUILDING WORKS:-

Construction of Double storeyed framedstructure (G+1) with RCCM-30 (RMC) Design Mix, framed Construction Water ProofingTreatment (WPT) with APP bituminous membrane and ATT etc all as specified and as shown on drawings.

Construction of covered Cycle shed with RCC M-30 Design mix concrete in foundation and pedastal, stee tubular trusses and Columns or Stanchions with Galvalume pre painted Profile steel sheets all as specified and shown on drawings.

SCHEDULE ‘A’ PART - XII - FITTINGS, FIXTURES AND MISCELLANEOUS ITEMS:-

EXTERNAL ELECTRIC SUPPLY:- Design, Supply, fixing, testing and commissioning of weather proof, vermin proof and dust proof LT out door cubical type, panel board of size 1.00 x1.50 x 0.50m suitable for 3 phase, 4 wire 415V, 50HZ CPRI approved with bus bar chamber including wiring with suitable rated PVC insulated copper conductor etc. and made out of 3.15mm thick CRCA steel sheet powder coated, factory made, including locking arrangement and mounted on angle iron platform made out of MS angle 50x50x6mm, 300mm height from GL suitable to length of LT panel fitted with suitable nut, bolts and washers etc, painting with 2 coats of powder coating paint over one coat of metal primer, necessary PCC foundation / Platform etc. as per manufacturer instructions complete and consisting of the following :-

Earthing complete using galvanised steel earth plate 600 x 600 x 6mm thick burried directly in ground, earth pit not less than 2.25m deep below ground level connected to and including GI MS strip 25 x 4mm as earth lead by means of nuts and bolts, check nuts and washers of galvanised iron sheet, passing throgh protection pipe of 40 mm dia light grade GI pipe all as shown in electrical plate No.3 of SSR Part - I and connected to earthing test point complete including testing filling of adquate quantity of charcoal dust and common salt including excavation in any type of soil, and PCC 1:3:6, type C1 chamber precast RCC cover 50 mm thick reinforced with 8 mm dia TMT bar 3 Nos both way with handle made out of 8 mm dia TMT bar, 20mm GI medium grade water pipe, wire mesh, funnel etc complete all as specified and directed.

INTERNAL ELECTRIC SUPPLY :- Sub main wiring complete with four runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multi stranded copper conductor cable with one run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multi stranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm dia nonmetallic rigid PVC conduit and conduit accessories (Concealed in wall / ceiling) all as specified and as directed. Note :- One run of earth continuity conductor and four run of copper conductor to gather taken as one length for measuring one length.

Sub main wiring complete with four runs of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multi stranded copper conductor cable with one run of 10 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multi stranded copper conductor cable as earth continuity conductor, drawn through and including 32 mm dia nonmetallic rigid PVC conduit pipe and conduit accessories (Concealed in wall / ceiling) all as specified and as directed. Note :- One run of earth continuity conductor and four run of copper conductor to gather taken as one length for measuring one length.

Supply and fixing of MCB DB VTPN, 6 way double door, 415 V, AC, 50Hz with for MCCB FP as incomer and TP, DP / SP MCBs as out going with tinned copper bus bar, neutral link earth link complete IP54 all as specified and as directed. Make:- Legrand, Cat No: - 507751, Schneider Electric Cat No:- NBKRENEZVDDO4 and equivalent in ABB.

Supply and fixing of MCB DB VTPN, 8 way double door, 415 V, AC, 50Hz with for MCCB FP as incomer and TP, DP / SP MCBs as out going with tinned copper bus bar, neutral link earth link complete IP54 all as specified and as directed. Make:- Legrand, Cat No: - 507752, Schneider Electric Cat No :- NBKRENEZVDDO8 and equivalent in ABB.

Supply and fixing of MCB DB TPN, 6 way double door, 415 V, AC, 50Hz with for MCCB FP as incomer and TP, DP / SP MCBs as out going with tinned copper bus bar, neutral link earth link complete IP43 all as specified and as directed. Make:- Legrand, Cat No: - 507731, Schneider Electric Cat No :- NBKRENEZVDDO4 and equivalent in ABB.

Supply, hanging and connecting up of Ceiling fan 1200mm sweep with modular stepped type electronic regulator 120W, 2 module and down rod complete, single phase 240 Volts, AC, 50 Hz and connecting up complete including provision of 3 core flexible wire of size 0.5 sqmm from celing rose to fan including writing MES No 2cm height with synthetic enamel black paint complete all as directed. Make :- Havells Rated five star type ES-50 premium 5 / Orient model Smart saver 50 or equivalent make as per Annexure.

Supply, hanging and connecting up of Ceiling fan 1400mm sweep with modular stepped type electronic regulator 120W, 2 module and down rod complete, single phase 240 Volts, AC, 50 Hz and connecting up complete including provision of 3 core flexible wire of size 0.5 sqmm from celing rose to fan including writing MES No 2cm height with synthetic enamel black paint complete all as directed. Make :- Havells Rated five star type ES-50 premium 5 / Orient model Smart saver 50 or equivalent make as per Annexure.

Supply and fixing connecting up of Heavy duty Exhaust fan of size 225mm sweep including louvers, heavy duty 1400 RPM, 240Volts, Ac, 50HZ and connecting up with cable 3 core flexible wire of size 0.5 sqmm from ceiling rose to fan, including writing MES No 2cm height with synthetic enamel black paint complete all as directed. Make:- Havells Turbo Force or equivalent make as per annexure.

Supply, Fixing and testing of 4ft LED surface and wall mounted batten LED luminaires , 19/20 Watts, with latest LED technology and efficient optics ensuring perfectly uniform illumination and unparallelle led light distribution high optically efficient serrated diffuser, Isolated Multistage CCCV driver with voltage range 150-270V AC, temperature range- 0 to 50o C, CRI >80, class-1, SDCM <5, Driver efficiency >85%, Power factor >0.95, THD<10%, Colour temperature-6500K, short circuit and over circuit protection, Surge protection- 3KV in CM, Safety Extra Low Voltage Safe level < 60V DC as per IS-10322 / IEC-60598 standard, IP20 protected, 50,000 burning hours, with 70% of its initial lumen maintained, Lumianire efficacy>100lm/W fixed complete including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor for connection complete all as specified and directed. Make:- Philips Cat Part No: BN150W LED 20S - 6500 PSE ODGR / Wipro Cat Part No: LL20 - 221-XXX- 65AL1 / Havells Cat Part No: ENDURA LINEAR NEO BS20W LED 840SPC WH.

Supply, Fixing and testing of 2ft LED surface and wall mounted batten LED luminaires, 9 / 10 Watts, with latest LED technology and efficient optics ensuring perfectly uniform illumination and unparallelle led light distribution high optically efficient serrated diffuser, Isolated Multistage CCCV driver with voltage range 150-270V AC, temperature range- 0 to 50o C, CRI >80, class-1, SDCM <5, Driver efficiency>85%, Power factor >0.95, THD<10%, Colour temperature-6500K, short circuit and over circuit protection, Surge protection- 3KV in CM, Safety Extra Low Voltage Safe level < 60V DC as per IS-10322 / IEC-60598 standard, IP20 protected, 50,000 burning hours, with 70% of its initial lumen maintained, Lumianire efficacy>100lm/W fixed complete including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor for connection complete all as specified and directed. Make : Havells Cat Part No: ENDURA LINEAR NEO BS 10LED 830 SPC WH / Wipro Cat Part No: LL20-111-XXX-65-NE / Cromption Greaves Cat Part No: LCTL-9-CDL.

Supply, Fixing and testing of square LED surface and wall mounted batten LED luminaires, 12 / 15 Watts, with latest LED technology and efficient optics ensuring perfectly uniform illumination and unparallell led light distribution high optically efficient serrated diffuser, Isolated Multistage CCCV driver with voltage range 150-270V, AC, temperature range- 0 to 50o C, CRI >80, class-1, SDCM <5, Driver efficiency>85%, Power factor >0.95, THD<10%, Colour temperature-6500K, short circuit and over circuit protection, Surge protection- 3KV in CM, Safety Extra Low Voltage Safe level<60V DC as per IS-10322 / IEC-60598 standard, IP20 protected, 50,000 burning hours, with 70% of its initial lumen maintained, Lumianire efficacy>100lm/W fixed complete including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor for connection complete all as specified and directed. Make :- Wipro Cat Part No: LD81-101-XXX-60-SM / Crompton Greaves Cat Part No: LCDSPLN-S-12-CDL / Bajaj Cat Part No: BGSOL Sleek surface 15W WH SQ.

Supply, Fixing and testing of 2ft LED surface and wall mounted mirror light LED luminaires, 7 /10 Watts, with latest LED technology and efficient optics ensuring perfectly uniform illumination and unparallelleled light distribution high optically efficient serrated diffuser, Isolated Multistage CCCV driver with voltage range 150-270V AC, temperature range- 0 to 50o C, CRI >80, class-1, SDCM <5, Driver efficiency>85%, Power factor >0.95, THD<10%, Colour temperature-6500K, short circuit and over circuit protection, Surge protection- 3KV in CM, Safety Extra Low Voltage Safe level<60V DC as per IS-10322/IEC-60598 standard, IP20 protected, 50,000 burning hours, with 70% of its initial lumen maintained, Lumianire efficacy>100lm/W fixed complete including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor for connection complete all as specified and directed. Make :- Havells Cat Part No: ENDURA LINEAR NEO BS 10 LED 830 SPC WH / Wipro Cat Part No: LL20-111-XXX-65-NE / crompton Greaves Cat Part No: LCL-07-CDL / Bajaj Cat Part No: BCLSB 10WH.

Supply, Fixing and testing of square LED surface and wall mounted batten LED luminaires, 6 / 8 Watts, with latest LED technology and efficient optics ensuring perfectly uniform illumination and unparallelleled light distribution high optically efficient serrated diffuser, Isolated Multistage CCCV driver with voltage range 150-270V AC, temperature range- 0 to 50oC, CRI >80, class-1, SDCM <5, Driver efficiency>85%, Power factor >0.95, THD<10%, Colour temperature-6500K, short circuit and over circuit protection, Surge protection- 3KV in CM, Safety Extra Low Voltage Safe level<60V DC as per IS-10322/IEC-60598 standard, IP20 protected, 50000 burning hours, with 70% of its initial lumen maintained, Lumianire efficacy>100lm/W fixed complete including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor for connection complete all as specified and directed. Make :- Havells Cat Part No: ENDURA LINEAR NEO BS 10 LED 830 SPC WH / Wipro Cat Part No: LD81-350-XXX-60-SM / Crompton Cat Part No: LCDSPLN-S-06-CDL / Bajaj Cat Part No: BGSLO Sleek Surface 8W WH SQ.

Supply and fixing and testing of 15W, High efficient LED Street light, Aluminium pressure Die cast housing parts for long life,pure polyester powder coated dark gray housing, High purity PMMA lenses for superior performance, toughened glass with silicon gaskets for IP65 protection, Driver cover designed to suit top maintenance, Suitable for mounting on walls with suitable size bracket. Up to 25 mm, LED make:- Nichia, Power factor>0.95, Lumianire lumen output- 6440lm, CCCV driver with Voltage range 150-270V, AC, Temperature range- 0 to 50oC, Driver efficiency > 85%, Power factor > 0.95, THD<10%, CRI >70, Colour Temperature- 5700K, Surge protection from over voltages- 4.0KV in CM, 50,000 burning hours, Luminaire efficacy >92lm/Wfixed complete including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor for connection complete all as specified and directed. Make:- Havells Cat Part No: ENDURA PEARL SL 15W LED 757 SASY TOPC / Bajaj Cat Part No: BCLST 15W LED IV2..

Supply and fixing of ceiling surface mounted 2x2 LED down light fitting 33 to 34 watts with CRCA powder coated housing with high transitivity non yellowing virgin PMMA diffuser, system efficacy at luminary level is ≥ 90 Lumens/watt with a life time of 50,000 burning hours as per L70 criteria, 6500K color temperature, CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CCCV operated driver with voltage variation range - 150 to 270 Volts AC, surge protection of 3 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. (Make:- Wipro Cat Part No: CRCO 10RO36HP57GI, Bajaj Cat Part No: BZRSQLGX34W CW, Havells Cat Part No: PLUTO SURFACE 2X2 PLS 34W LED 84 OS.

Supply and fixing and testing of LED bulk head luminaire fitting surface type of capacity 10 watts LED including all electrical connectoin complete all as specified and directed. Make:- Bajaj Cat Part No: BIBWP 10W LED / equivalent in Crompton and Philips.

Supply and fixing of MCB, TP 32A, 10 KA breaking capacity, 415 volts, 'C' curve, 50 HZ complete all as specified and directed.

Supply and fixing of MCB, TP 63A, 10 KA breaking capacity, 415 volts, 'C' curve, 50 HZ complete all as specified and directed.

Supply and fixing of MCB, SP 6 to 32A, 240 volts, 10 KA breaking capacity, 'C' curve, 50 HZ, complete all as specified and directed.

Supply and fixing of MCB, SP 16A, 240 volts, 10 KA breaking capacity, 'C' curve, 50 HZ, complete all as specified and directed.

Supply and fixing of MCB, FP, 32A, 415 volts, 10 KA breaking capacity, 'C' curve, 50 HZ, complete all as specified and directed.

Supply and fixing of MCB, FP, 63A, 415 volts, 10 KA breaking capacity, 'C' curve, 50 HZ, complete all as specified and directed.

Earthing complete using galvanised steel earth plate 600 x 600 x 6mm thick burried directly in ground earth pit not less than 2.25m deep below ground level connected to and including GI wire 4mm as earth lead by means of nuts and bolts, check nuts and washers of galvanised iron sheet,passing throgh protection pipe of 20mm dia light grade GI pipe all as shown in electrical plate No.3 of SSR Part - I and connected to earthing test point complete including testing filling of adequate quantity of charcoal dust and common salt including earth work in any type of soil, and PCC 1:3:6, type C1 chamber, precast RCC cover 50mm thick reinforced with 8 mm dia TMT bar 3 Nos both way with handle made out of 8 mm dia TMT bar, 15mm GI medium grade water pipe, wire mesh,funnel etc and connecting testing etc complete all as specified and directed.

EXTERNAL WATER SUPPLY:- Construction of valve chamber of size 900 x 900 x 900mm in PCC 1:3:6 block masonry built in CM1:4 with MS covers 3 mm thick and angle iron frame of size 50 x 50 x 6mm with locking arrangement including excavation and earth work in any type of soil, PCC 1:4:8, type D2, for foundation, PCC bed / coping in cement concrete 1:2:4, type B1, plastering 15 mm thick with CM 1:4, painting with one coat of bituminous black paint on all steel surface all as shown in Drg No. AFD/TD/056 sheet 1/2 and 2/2 dt 20.02.03 and as directed by Engr-In-Charge.

Cutting in position existing GI pipe line of 50mm bore and inserting of new tee of size 50 x 50 x 40mm including necessary joints, jointing material etc.complete all as directed. Note:- Earth work shall be measured and paid separetely.

INTERNAL WATER SUPPLY:- Supply and fixing of 15mm bore, angle cock, cast copper alloy, fancy type chromium plated for galvanised iron pipe complete all as specified and directed.

Supply and fixing of health faucet cock, brass chromium plated 15mm bore including 1m long flexible pipes of approved make complete all as specified and directed.

COOLING APPLIANCES:- Supply, installation, commissioning of water cooler fully stainless steel , electric single phase having approx. storage capacity of 150 Ltrs and nominal cooling capcity of 150 Ltrs per hour complete all as specified and directed. Make:- USHA / BLUE STAR / VOLTAS,

Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5 % and capacity 3 KVA. Make:- VGUARD / MICROTEK / APLAB.

SEWAGE DISPOSAL:- Supply and Fixing of SFRC manhole cover (heavy duty) 600mm dia (560mm clear open) with frame for manholes of the following specification as per IS : 12592-2002, made with high tech concrete, Flat iron 90 x1.35mm thickcover, 4mm TMT wire mesh with hook 4mm ,TMT bars 10mm dia at 100mm centre to centre at top, 16mm dia bars for flushed handles, RCC M- 35 design mix, outer cover / collars of metals sheet 1.4mm and thickness 90mm complete all as specified and directed.

lakshmibuilders

Baka Construction