Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.4 LAccepted-AOC RZ 50D GALI NO 13 VASHISHT PARK PANKHA ROAD NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | ₹37.4 L Quoted ₹37.9 L | L1 | Accepted-AOC Accepted due to lowest rate quoted |
| 2 | L2₹38.1 LRejected-Finance | ₹38.1 L | L2 | Rejected-Finance Rejected due to highest rate quoted |
| 3 | L3₹38.6 LRejected-Finance 3788 SHAH GANJ GB ROAD NEW DELHI 110006 | NORTH | DELHI | 110006 | ₹38.6 L | L3 | Rejected-Finance Rejected due to highest rate quoted |
| 4 | L4₹39.2 LRejected-Finance HOUSE NO 142 GALI NO 07 PREM VIHAR NANGLI SAKRAWATI NAJAFGARH NEW DELHI 110043 | NEW DELHI | NAJAFGARH | DELHI | 110043 | ₹39.2 L | L4 | Rejected-Finance Rejected due to highest rate quoted |
| 5 | L5₹40.5 LRejected-Finance | ₹40.5 L | L5 | Rejected-Finance Rejected due to highest rate quoted |
| Sl No | Description | Qty | Unit | M/S Anand Enterprises L3 | D P ENTERPRISES L2 | S K ENGINEERS AND CONTRACTOR L4 | YANSHIKA SECURITY SERVICES L5 | M/S PARKASH ENTERPRISES L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling/Taking out old unserviceable earthing any type/size complete all as specified and directed. | 81 | Each | 5 ₹405 | 10 ₹810 | 50 ₹4,050 | 5 ₹405 | 100 ₹8,100 |
| 2.00 | Supply and fixing in repair of Earthing to DBs with Galvanised steel pipe electrode shall be of medium grade 40 mm dia and 2.5 m in length. Pipe electrode shall be cut tapered at the bottom and is provided with 12 mm dia holes (staggered) at 75 mm centre to centre upto 2 m of length from bottom. The electrode shall be buried directly in ground vertically with its top edge not less than 1.25 m below ground level connected to main earth lead 4.0 sqmm galvanised iron wire by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.2 of MES Schedule pt-I 2009, GI earth lead shall be protected by GI pipe 15 mm dia medium grade and connected to distribution board including excavation in any type of soil,returning filling, disposal of soil, providing alternate layer of charcoal dust and common salt upto top edge of electrode, construction of PCC pit with RCC cover, funnel, including testing on completion complete all as specified and as directed. Note- cost of Making good of disturbed surface/area to match with existing surface is deemed to be included in the quoted rate. | 50 | Each | 1,200 ₹60,000 | 4,000 ₹2 L | 3,300 ₹1.6 L | 4,391 ₹2.2 L | 2,700 ₹1.4 L |
| 3.00 | M & L for Earth continuity conductor or main earthing lead of 4.0 Sqmm galvanized iron wire, buried in ground or fixed to wall in and including 15 mm bore GI pipe medium grade for protection of earth wire complete all as specified and directed. Note- cost of Making good of disturbed surface/area to match with existing surface is deemed to be included in the quoted rate. | 200 | RM | 30 ₹6,000 | 30 ₹6,000 | 80 ₹16,000 | 191 ₹38,200 | 150 ₹30,000 |
| 4.00 | Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI strip 32mm X 6 mm main earthing lead by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt all around earth plate, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 40 mm dia GI medium grade earth lead protection pipe, complete all as specified and directed.
(NOTE : Earth strip and its protection pipe upto and including 7.5 mtr are included under this item) | 20 | Each | 2,200 ₹44,000 | 4,000 ₹80,000 | 4,800 ₹96,000 | 4,999 ₹99,980 | 3,000 ₹60,000 |
| 5.00 | M & L for Chemical Earthing complete with copper earth plate electrode 90 cm x 60cmx 5mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to copper strip 32 x 6 mm as earthing lead by means bolts and nuts check nuts and washers of copper and connected to test point including insulating sleeve PCC chamber soil including necessary excavation in any type of soil, returning, filling removal of soil, filling with 3 bags (60 Kg each) of environment friendly portland cement based backfill compound (Resistivity below 0.15 ohm) and all connected to Earthing test point complete all as specified and directed and testing on completion.
(NOTE : Earth strip and its protection pipe upto and including 7.5 mtr are included under this item) | 3 | Each | 32,000 ₹96,000 | 25,000 ₹75,000 | 33,000 ₹99,000 | 43,199 ₹1.3 L | 50,000 ₹1.5 L |
| 6.00 | Material and labour for earthing complete with copper plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to copper strip 20mm X 3 mm main earthing lead by means of copper bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt all around earth plate, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 40 mm dia GI medium grade earth lead protection pipe, complete all as specified and directed.
(NOTE : Earth strip and its protection pipe upto and including 7.5 mtr are included under this item) Note for Item No 2 to 6 (a) Earth Testing result certificate duly signed by contractor shall be produced before Engr-in-Charge. | 8 | Each | 28,000 ₹2.2 L | 25,000 ₹2 L | 26,000 ₹2.1 L | 39,999 ₹3.2 L | 40,000 ₹3.2 L |
| 7.00 | Taking out old unserviceable strip/wire any type from wall/roof complete all as specified and directed | 1,170 | RM | 2 ₹2,340 | 5 ₹5,850 | 5 ₹5,850 | 1 ₹1,170 | 1 ₹1,170 |
| 8.00 | Supply and fix aluminium strip of size 25x3.15 mm for Earth continuity conductor or main earthing lead fixed to wall/ roof in and including SMC/DMC indulator/seperator and fixing screws etc. for roof conductors and down conductors above ground or any other indicated situation complete all as specified and directed.
Note:- Two lengths of strips shall be jointed together by overlapping not less than 100 mm both ends through welding/brazing. | 700 | RM | 120 ₹84,000 | 90 ₹63,000 | 139 ₹97,300 | 149 ₹1.0 L | 100 ₹70,000 |
| 9.00 | Supply and fix GI strip of size 32x6 mm for Earth continuity conductor or main earthing lead fixed wall in and including SMC/DMC indulator/seperator and fixing screws etc. or laid underground as in grid connection of earthing complete all as specified and directed. | 350 | RM | 300 ₹1.1 L | 120 ₹42,000 | 220 ₹77,000 | 199 ₹69,650 | 125 ₹43,750 |
| 10.00 | Supply and fix copper strip of size 20x3.15 mm for Earth continuity conductor or main earthing lead fixed wall in and including SMC/DMC indulator/seperator and fixing screws etc. or laid underground as in grid connection of earthing complete all as specified and directed. | 120 | RM | 800 ₹96,000 | 550 ₹66,000 | 650 ₹78,000 | 1,199 ₹1.4 L | 550 ₹66,000 |
Updated dates
Tender Value
₹43.6 L
EMD Value
₹88,000
Closing Date
17 Feb 2026, 6:00 pmClosed
GE (AF) GURGAON
GE (AF) GURGAON
SPL REPAIR TO COOLING/HEATING APPLIANCES AGAINST BER AND CERTAIN LIGHTENING PROTECTION SYSTEM AT AF STN RAJOKRI UNDER GE (AF) RAJOKRI
2026_MES_749155_1
GE/GUR-/NIT-133/2025-26
Open Tender
Civil Works
240 days
GE (AF) GURGAON
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) GURGAON
₹88,000
18 Mar 2026
19 Jan 2026
19 Feb 2026
19 Jan 2026
17 Feb 2026
3 Feb 2026
Dismantling/Taking out old unserviceable earthing any type/size complete all as specified and directed.
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI strip 32mm X 6 mm main earthing lead by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt all around earth plate, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 40 mm dia GI medium grade earth lead protection pipe, complete all as specified and directed. (NOTE : Earth strip and its protection pipe upto and including 7.5 mtr are included under this item)
M & L for Chemical Earthing complete with copper earth plate electrode 90 cm x 60cmx 5mm thick, buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the earth plate not less than 1.5m below ground level, connected to copper strip 32 x 6 mm as earthing lead by means bolts and nuts check nuts and washers of copper and connected to test point including insulating sleeve PCC chamber soil including necessary excavation in any type of soil, returning, filling removal of soil, filling with 3 bags (60 Kg each) of environment friendly portland cement based backfill compound (Resistivity below 0.15 ohm) and all connected to Earthing test point complete all as specified and directed and testing on completion. (NOTE : Earth strip and its protection pipe upto and including 7.5 mtr are included under this item)
Material and labour for earthing complete with copper plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to copper strip 20mm X 3 mm main earthing lead by means of copper bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (1991) with connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt all around earth plate, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 40 mm dia GI medium grade earth lead protection pipe, complete all as specified and directed. (NOTE : Earth strip and its protection pipe upto and including 7.5 mtr are included under this item)
Taking out old unserviceable strip/wire any type from wall/roof complete all as specified and directed
Supply and fix aluminium strip of size 25x3.15 mm for Earth continuity conductor or main earthing lead fixed to wall/ roof in and including SMC/DMC indulator/seperator and fixing screws etc. for roof conductors and down conductors above ground or any other indicated situation complete all as specified and directed. Note:- Two lengths of strips shall be jointed together by overlapping not less than 100 mm both ends through welding/brazing.
Supply and fix GI strip of size 32x6 mm for Earth continuity conductor or main earthing lead fixed wall in and including SMC/DMC indulator/seperator and fixing screws etc. or laid underground as in grid connection of earthing complete all as specified and directed.
Supply and fix copper strip of size 20x3.15 mm for Earth continuity conductor or main earthing lead fixed wall in and including SMC/DMC indulator/seperator and fixing screws etc. or laid underground as in grid connection of earthing complete all as specified and directed.
Taking down old unserviceable single pointed termination rod any type over the roof from PCC block/GI pipe complete all as specified and directed.
Supply & fix single pointed air termination aluminium rod 12mm dia, 300 mm long complete all as specified and directed
Supply & fix single pointed air termination copper rod 12mm dia, 300 mm long complete all as specified and directed
Supply & fixing 50 mm dia bore tubing, Light grade,galvanised, with all fitting,screwed,and fixed complete to walls/ceilings and laid in floors for earthing strip protection/ fixing of air terminator rod including taking out old pipe complete all as specified & directed.
S&F of 40 mm medium grade PVC pipe ISI marked, burried earthing strip into the ground for proper insulation of building and equipment complete all as directed.
S&F in replacement of high quality copper bolts with nuts, washer to replace and repair existing earthing bolts of suitable length all as specified and directed.
S&F in replacement of high quality GI bolts with nuts, washer to replace and repair existing earthing bolts of suitable length all as specified and directed.
M&L for Brazing of size 40mmx25mmx5mm in copper strip of size 25x3mm at the joint of strip through copper rod of proper size and combination of oxygen acetylene gas cylinder.Joint must be able to withstand high tensile strength and properly done without any defect or without any crack all as specified and directed.
M&L for test point terminal block in replacement made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex.head screw complete all as specified and directed by Engineer-in-Charge.
Taking down carefully copper / aluminium point wiring light / fan, socket or power point complete including fittings such as switches, sockets, ceiling rose, bell push bell buzzer lamp holder bracket etc. removing from site and making good disturbed surface of wall, floor etc complete all as specified and as directed.
M&L for flame proof wiring with single core PVC insulated and unsheathed 1100 volt grade FRLS electric cable with multi stranded copper conductor of size 2.5 Sqmm phase and neutral drawn in and including ERW rigid steel stove enameled black conduit heavy duty ISI marked of size 20mm dia on surface/wall/ceiling including all flame proof conduct fittings and accessories such as tees junction boxes, bends duly tested by CMRI Dhanbad suitable for one light /fan point controlled by one flame proof rotary switch SP one way and including drawing continuous earth wire FRLS PVC insulated unsheathed 1100v grade cable with stranded copper conductor of size 1.5 Sqmm and connected to earth dolly complete all as specified and directed by Engrs-in-Charge.
Supply and fixing flame proof/weather proof direct entry type rotary switch single pole on & OFF rotary motion switch in cast aluminum alloy LM-6 enclosure epoxy powder coated single pole 230Volts 10 Amps, AC ON/OFF switch operated externally by Knob having 02 Nos of M-20 cable entries, earthing terminals suitable for mounting on Wall/Steel structure etc all as specified and directed. Make : Flexpro/Sudhir/Baliga/Shyam.
Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed size. Note :- (a) All fittings shall be ISI marked and shall have approval of CMRI Dhanbad . (b) Original Test certificate of Manufacturer shall be produced by Contractor .
Supply install testing and commissioning of flame proof totally enclosed SPN DB 12 way complete with CMRI certified and flame proof, whether proof complete with emergency off switch with LED indicator as per incoming and out going circuit. Incoiming : (a) MCB SPN 40 Amps complete with 10 KA breaking capacity and B Curve -01 Nos. Out going : (a) MCB SP 10 Amps complete with 10 KA breaking capacity and B Curve -02 Nos (b) MCB SP 20 Amps complete with 10 KA breaking capacity and B Curve-08
Supply and fixing ceiling fans complete with blades, down rods, including smart IR remort and other accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) copper winding with LED speed indicator in fan body complete all as specified and as directed. Make- Havells/Goldmedal/Almonard
Supply and fix electric water heater, storage type outer body made out of shock/rust proof engineering thermoplastic body, incoloy glass coated heating element of 2 KW, storage capacity 25 litre, BEE 5 Star rated, multifunction 4 in 1 saftey valve, capilary thermostat,adjustable temperature control knob, power and heating LED indicator, heavy duty anode Rod, Vitreous enamel titanium glassline coated tank, pressure bearing capacity upto 8 bar, weight of the product shall not be less than 12 kg complete with all accessories such as safety valve, thermostate, NRV, steel braided connection pipe(1 pair of minimum 450 mm length) complete all as specified and as directed by Engr-in-Charge. Make:-Goldmedal/Havells/Racold
Taking Down old u/s ceiling fan of any type and size and deposite to MES store yard in cludung fan rod canopy louvers etc complete all as specified and directed.
Taking Down old u/s water heater of any type and size and deposite to MES store yard including complete all as specified and directed.
Supply and fixing of anti suicide fan rod 10" (260 mm) long spring hiddened heavy duty zinc plated power coated steel rod with auto load release feature including connector wire white/brown in colour as per site requirement complete all as specifed and directed.Make- Gold life
S&F in MCB SP 5 to 32 Amps, 240 volts curve 'B',breaking capacity 10KA, all as specified.
S & F of sub main wiring with PVC insulated, FRLS unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 4.0 sqmm (Nominal area) drawn in and including PVC conduit of suitable size as directed with and including one run of 4.0 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed.Note: (i) Two runs of 4.0 sqmm cable and one run of 4.0 sqmm cable of earth continuity conductor and conduit shall be a unit length.
S&F of single pole and neutral enclosure with 2 pin and metal earth plug and socket complete with one single pole MCB 25 Amp complete all as specified and as directed.Make-Havells/Indoasian/Legrand
S & F of sub main wiring with PVC insulated, FRLS unsheathed two single core cable 1100 volts grade with stranded copper conductor of size 1.5 sqmm (Nominal area) drawn in and including PVC conduit of suitable size as directed with and including one run of 1.5 sqmm multi stranded copper conductor single core PVC insulated, unsheathed cable of green colour as continuous earth wire including lugs etc connected and tested complete all as specified and as directed.Note: (i) Two runs of 1.5 sqmm cable and one run of 1.5 sqmm cable of earth continuity conductor and conduit shall be a unit length.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.16 MB
BOQ_838972.xls
BOQ • 0.36 MB
TenderDocumentsNIT133.pdf
Tender Documents • 0.42 MB
Download all tender documents and submit your bid