CERTAIN REPAIR TO FENCING AT DALHOUSIE

Amount

Dismantling of chain link fencing wire mesh, any type

Disamntling posts or struts (wood, steel or R.C.C)any section , including taking out embedded portion and making good disturbed ground post embedded concrete including cleaning and cutting of grass,shurbs,bushes etc

Excavating in post holes (or similar holes) each n.exc 0.5 Cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer n.exc 25 cm, watering, and removing surplus soil to a distance n.exc 50 mtr and making good surfaces in soft/loose soil.

M & L cement concrete type C-2 1:3:6 (Using 40mm graded stone aggt) in foundation filling and mass concrete.

Supply only Chain link fencing 3.8mm dia galvanized wire (100x100) mm mesh made upto matress lapped wire and laid on position / fixed on poles complete.

Fixing only chain link fencing including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire.

Mild steel work as post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc; and similar works conforming to Fe-290 Gde E-165 complete all as specified.

S&F Mild steel round bars 10mm dia Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F Mild steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed.

S & F M.S. Flat iron as in hold fast and similar small articles, cut to length, bent to shape, drilled hole and fixed with screw etc. conforming to Fe 410-0 or F 310-0 complete

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed.

S & F Conertina coil with punched tape concertina coil 600 mm diameter 10 mtr openable length, haaving 50 Nos round per 6 mtr length over 3/4 mtr height of wall with existing 'Y' shaped angle iron tied with necessary bolt with angle iron and GI staples with existing barbed wire concertina coil of core wire diameter 15 mm and spacing of blade 26 mm completed all as specified manufacture and directed. Note 'Y' shaped angle iron, barbed wire and necesary bolts and GI staple whichn is required for fixing shall be measured and paid under respective items.

M&L Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer all as specified and directed.

Havish Construction (BID ID -3246224)

M/S WALIA ENGINEERS (BID ID -3245844)

Eshaan Construction Co. (BID ID -3246611)

M/s Shakti Electric Works (BID ID -3246589)