Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹9.1 L
EMD Value
₹9,200
Closing Date
13 Jun 2025, 3:00 pmClosed
Block Development officer(BP),Madhuranthagam Block
Block Development Office Madhuranthagam Block
Construction of New PDS Building in Nallamur village at Nallamur Panchayat, Madhuranthagam Block Under MLACDS for the year 2025-26
2025_RDTN_566963_1
Rc.No.0816/2025/A3 Dated. 23.05.2025
Open Tender
Civil Works - Buildings
Lump-sum
90 days
Nallamur
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹9,200
Yes
13 Jun 2025
10 Jun 2025
13 Jun 2025
10 Jun 2025
13 Jun 2025
10 Jun 2025
Amount
Earthwork excavation in all classes of soils except hadr rock in hard ordinary soil with initial lead and lift including all other labour chargesetc. Complete as per SS 20 B.
Filling with good dry Msand including cost and conveyance to site and labour charges for filling, watering, tamping etc. complete
Cement Concrete 1:4:8 ( One Cement Four sand and eight Hard Broken stone) using 40 mm gauge Hard Broken Granite stone jelly for foundation including cost and conveyance of materials to site and labour charges for laying, watering and compacting etc. complete
Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.
Supplying & Erecting centering for sides & soffiots including necessary supports & Labour charges etc., completely.
Upto Basement
Above Basement
Reinforcement Cement Concrete 1:11/2:3 (One cement, one and half part of sand, three Hard Broken stone) using 20 mm guage machine broken hard broken granite stone jelly for all RCC including cost conveyance and all labour charges etc. complete.
Brickwork in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site mixing, palcing, curing and all labour charges etc. complete
Upto Basement
Above Basement
Supply and fabrication of steel including cost and conveyance of all materials to site and all labour charges for placing in position etc. complete.
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Granolithic Flooring CC1:2:4 (one of cement two of sand and four hard brokken stone) 25mm thick using 20mm ISSmetals including all other charges etc.,
Paving the floor with scratch proof ceramic tiles of any colour and any size laid in CM 1:3, 20mm thick. And pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complete
Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard
Special Ceiling Plastering in CM 1:3 mix, 10mm thickness including cost and conveyance of all materials to site and labour charges etc. complete.
Plastering in CM 1:5 mix, 12mm thickness including cost and conveyance of all materials to work site from approved quarry sources and labour charges etc. complete.
Cement Concrete 1:2:4 mix using 20 mm ISS HBG metal including cost and conveyace of all materials and all labour charges, etc.
Fabrication and Supply of MS Door of any size with Double Leaves outer frame made of 35 x 35 x 5 mm equal MS 'L' angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 Nos Horiz. And 3 nos. of Diagonal using MS Fladder Door (1.00 x 2.10 m)
Door (0.90 x 2.10 m)
Fabrication and Supply of MS Door of any size with Single Leaves outer frame made of 35 x 35 x 5 mm equal MS 'L' angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 Nos Horiz. And 3 nos. of Diagonal using MS Flat of size 20 x 5 mm fully covered with 18 gauge plain MS Full Sheet welded with shutter frame neatly including painting the whole unit with one coat of best quality of red oxide prime including cost, conveyance, loading, unloading etc., of size Toilet Door (0.90 x 2.10 m)
Fabrication and Supply of MS window of any required size with three Leaves outer frame made of 35 x 35 x 5 mm equal MS 'L' angle mullion section made of 35 x 35 x 5 mm equal 'T' Section Shutter frame made of 25 x 25 x 5 mm equal MS 'L' angle for Horizontal Window (1.00 x 1.30 m)
Fabrication and Supply of MS 'N' Type Glazed Ventilator of any required size with Single leaf outer frame made of 35 x 35 x 5 mm equal MS 'L' angle for Horizontal and Vertical members and the shutter frame strengthened by stiffeners of 2 Nos Horiz. And 3 Ventilator (0.90 x 0.60 m)
Supply and fixing of RCC Jolly including the cost of materials and labour charges, conveyance to the site and fixing charges etc., complete as per standard specification Jolly (0.60 x 0.45 m)
Supply and fixing of MS Rolling Shutter including the cost of materials and labour charges, conveyance to the site and fixing charges etc., complete as per standard specification
White washing One coats with approved colour and quality including the cost of paint and labour charges etc., complete complying with the standard specification and as directed by the Departmental Officers
Painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
Painting two coats with plastic emulsion paint of approved colour and quality including the cost of paint and labour charges etc., complete complying with the standard specification and as directed by the Departmental Officers
Painting two coats over new iron works using ready mixed enamel pain including the cost of paint and labour charges etc., complete complying with the standard specification and as directed by the Departmental Officers
Providing and fixing PVC Rainwater Downfall pipes of 110 mm dia with necessary shoes, bends and other speicals, clamps, screws, nails, teakwood plugs etc., complete including cost of all materials complete complying with standard specification.
Supplying and fixing of PVC water storage tank of best approved quality and make of super thick with lid of ca pacity of 500 litres with accessories including giving necessary connection etc., complete as directed by the departmental officer
Wring with 2x2.5 sq.mm PVC unsheathed SC. Alu.cable of 650v grade in suitable PVC rigid pipe on wall and ceilling with PVC accessories with 150x100x113mm T.W switch box in flush with wall, covered with nylon sheet of 3mm thick 5 Amps 3 pin non - interloc for Only Wiring and Switcth (SD 10) Plug Point
Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated unsheathed single core Copper Conductor of 1100 v Grade in suitable PVC Rigid Pipe on wall and ceiling with PVC accesseries with TW Switch box with 5 A F . T . Switch with painting of suitable colour for Light Point and Fan Point ( For Electronic Regulator ) (SD 25)
Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains (SD 64)
Supply and fixing of single box type 4' 40w flou fitting coplete with tube, copper choke with condensor including all etc.complete (SD 88) Tube Light
Suplying and Fixing of 1200mm (48") AC ceiling fan complete with stepped Regulator as per standard specifications. SD-106 FAN
Supply and fixing of TNEB meter Board Suitable For 32 A Single Phase sc .With 32 A Fuse Unit 37 etc., SD - 125 Meter Board
Supplying and fixing of water tight Bulk head fitting with guard (Philips/bajaj/crompton/Klite) suitable for incandescent lamp and 60W bulb . [ SD 81 ] Bulk head Fitting
Supply and Fixing of 11 W CFL in the existing light point SD - 80 CFL Bulb
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
stage.html
html • 0.02 MB
finance_676938.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .