Special repairs to type-IV qtr. Block-D at Polytechnic Campus Karad.(3rd Call)

Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.

Providing material and labour for 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for light shade

Providing material and labour for 24" x 24" vitrified 8 mm thick tile flooring over 20mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for antiskit

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1- cement : 3-coarse sand) and jointed with white cement slurry

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.

Providing material and labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in superstructure above plinth level upto floor two level in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

Providing material and labour for 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing material and labour for 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Providing material and labour for Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on wall surfaces of given an even shade, over and including a priming coat of whiting after thoroughly brooming the surface free from mortar dropping and other foreign matter.

Providing material and labour for applying "Apex Ultima" exterior acrylic paint on New / Old surface of requirred shade on undecorated wall surface to give an even shade over and finishing smooth sand papering etc. Applying two coats of "Apex Ultima" paint after thoroughly brushing the surface free from mortar dropping and other foreign matter to make the surface smooth and one coat of exterior primer of approved brand and manufacture.

Providing material and labour for Painting two coats (excluding priming coat) on previously painted wood and wood based surface with enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign matter.

Providing and fixing 30 mm wire gauge shutters using galvanised M.S. wire of I.S. gauge designation of 85 G. with wire of 0.56 mm dia,for Doors, windows and clearstory windows including bright finished or/ and black enamellede M.S. butt hinges with necessary Mango wood or equivalent quality.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

WATER PROOFING TREATMENT : Cleaning existing Terrace Surface, Providing and laying Waterproofing Treatment in DOUBLE LAYER to Terrace with APP (Atactic Polypropylene polymer) Modified Pre-Fafabricated Five layer Water proofing Membrane, HYDROSTOP of TIKIDAN , Asian or equivalent make, comprising of 1st layer of 3mm thick and Minimum 3.5 Kg / m2 Weight Membrane HYDROSTOP 3 FGP, Upper and bottom surface finished in plastic Polyethylene Film and having Reinforcement of Fibre Glass at Core and 2nd Layer of 3mm Thick and Minimum 3.5 kg/m2 Weight Membrane HYDROSTOP 3 PYM, Upper surface finished in Minerals and Bottom surface finished in plastic Polyethylene film and having reinforcement of Non Woven polyester Matt at core, including a coat of bitumen primer TIKI PRIME S for Bitumen Membranes Manufactured to IS : 3384. Over the dried Primer Coat, Laying APP Membrane HYDROSTOP in DOUBLE LAYER using Butane Torch, the 1st Layer torch Bonded to the Primed Surface followed by Torch Bonding of 2nd Layer to the first, while maintaining the side Overlaps 100mm and END Overlaps 150mm, sealing all overlaps etc. complete, including treatment at all juctions and corners to accomodate stresses with 300mm Wide strips of 3mm HYDROSTOP 3 PYP and treatment over the Vertical Plane upto 200 mm height above the Finished Floor level with 3mm APP Membrane HYDROSTOP 3 PYM, the Waterproofing Membrane terminated by tucking it into the groove made on Vertical Plane, the groove sealed with cement : Sand Mortar, etc. all complete.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(C) 32mm

Providing material and labour for fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws. (B) ORNAMENTAL GRILL