Loading…
Loading…
Tender Value
₹13.5 Cr
EMD Value
₹27.0 L
Closing Date
21 Aug 2026, 2:00 pm
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
Above/Below/Par
BRIDGE
14 conditions · 3 needing a document upload
For works amounting above Rs. 50 lakhs. :- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contract turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderer shall submit requisite information as per Annexure XIII along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
SIMILAR NATURE OF WORK FOR THIS TENDER WILL BE - Any Civil Engineering work Consisting of fabrication /erection/launching of Steel girder or Steel FOB (3 m wide & above under running rail traffic) or work of workshop involving steel gantry bay/Overhead Crane.
66 conditions · 6 needing a document upload
1. All documents in support of fulfilment of Technical Eligibility Criteria as per Para 17.1 and 18.15.1 of Chapter-I of the Tender Document. 2. All documents in support of fulfilment of Technical Eligibility Criteria as per Para 17.2 and 18.15.2 of Chapter-I of the Tender Document. 3. Bid capacity as per Para 17.3 and 18.15.3 of Chapter-I of the Tender Document. 4. Details of the Works Completed by the tenderer during the last seven years to be filled in Annexure-I(a). 5. Details of contractual payment received by the Tenderer during the last 3 (three) financial years including the current financial year to be filled in Annexure-I(b). 6. Details of Plants and Machinery with the tenderer to be filled in Annexure- II. 7. Details of Personnel and Organization of the Tenderer to be filled in Annexure-III. 8. Details of Works Presently on hand of the Tenderer to be filled in Annexure- IV. 9. Details regarding Association of Railway Officer(s) with the tenderer to be filled in Annexure- V. 10. List of the Arbitration Cases of the Tenderer during last five years to be filled in Annexure-VI. 11. List of the Court Cases of the Tenderer during last Five years to be filled in Annexure- VII. 12. NEFT MANDATE FORM. All Payments to the agency (including the refund of the Earnest Money of the unsuccessful bidder preferably)will be remitted through NEFT. The Tenderer is required to submit Bank details and A/C No. etc. in Annexure-VIII 13. GST COMPLAINT INVOICE : To be filled as per Annexure-IX. 14. Certificate : Self declaration certificate as per format of certificate (Annexure-X). 15. LETTER OF CREDIT: To be filled as per Annexure-XI. 16. Bank Guarantee Bond from any schedule commercial bank of India: to be submitted as per Annexure-XII. 17. Each bidder or each member of JV must fill the format separately as per Annexure- XIII. 18. Tender document duly signed by the Tenderers/tenderer as per Annexure-XVI.
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT, GST complaint invoice, Letter of credit are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII, IX, X, XI, XII, XIII, XIV respectively. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The following documents should be specified for submission along with tender
List of Personnel, Organisation available on hand and proposed to be engaged for the subject work.
List of Plant Machinery available on hand own and proposed to be inducted on hired to be given separately for the subject work.
List of works on hand indicating description of work, Contract Value and approximate value of balance work yet to be done and date of award.
The tenderers whether sole proprietor, a limited company or a partnership firm he/they should submit authentic proof in terms of partnership deed, proprietorship documents etc. along with the tender. If he/they want to act through agent or individual partners should submit a power of attorney duly stamped and authenticated by Notary Public or by Magistrate in favour of specific person whether he/she/they are partners of the firm or any other person specifically authorizing him/her name to submit the tender, sign the agreement, receive money, witness measurements, sign measurement books, compromise, settle, relinquish any claims, preferred by firm and also sign No Claim Certificate and refer all or any disputes arbitration.
Replacement of girders of Br. No. - 209 over DN/HBC and DN/main between stations Gangpur and Bardhaman on Main Line section of Howrah Division.
W2_623_16_02_SDAH_2026-27
W2_623_16_02_SDAH_2026-27
Open
Works - General
12 Months
Kolkata, West Bengal
₹0
₹27.0 L
30 Jul 2026
30 Jul 2026
7 Aug 2026
40 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 12,88,17,321 | ||
| — | 659.00 | — | — | ||
| Supply and fabrication of welded steel girder as per approved drawing. The rate is inclusive of supply of steel section of IS : 2062 Gr. 'B0', testing of the material etc. The fabrication work to be carried out as per B1-2001 and welded bridge code. The rate shall also include the cost of loading and unloading, lead, lift etc etc required to carry out the work complete in all respects | — | — | — | 9,05,76,914 | |
| — | 32.00 | — | — | ||
| Supply and fixing of phosphorus bronze plate with bed plate in proper location by necessary fixing arrangement as per approved drawing. The rate is inclussive of all too;s, plants, cosumable,labours etc. Phosphorus bronj plate are to be passed by RITES/RDSO according to its specification, cost of which to be born by the contractor. | — | — | — | 15,25,760 | |
| — | 560.00 | — | — | ||
| Dismantling of existing girder under traffic block as per approved scheme . The rate includes cost of all tools & Tackles staging including their erection and dismantling etc. | — | — | — | 89,74,560 | |
| — | 659.00 | — | — | ||
| Erection/ launching of newly assembled girder and placement of the same on proper alignment, line and level with contractors labours, materials, tools & Plants etc. | — | — | — | 1,48,17,615 | |
| — | 128.00 | — | — | ||
| Drilling of 45/50 mm dia hole up to a depth of 600 mm in RCC/ masonry by power driven drill without damaging the existing concrete / masonry on pier & abutments with or without traffic block . The rates includes contractors labours, materials, tools & Plants etc. &other consumable required to carry out the work complete in all respect. | — | — | — | 79,104 | |
| — | 128.00 | — | — | ||
| Supplying, fabrication & fixing of H.D. Bolts as per approved drawing up to a length of 600 mm along with nuts, washer etc. The rate is inclusive of grouting the holes with epoxy compounds as per instruction of Engineer In-charge. The rate includes contractor's labours, materials, Tools & Plants etc. & other consumable required to carry out the work complete in all respects. | — | — | — | 2,89,152 | |
| — | 300.00 | — | — | ||
| Trolleying rail by rail dolley upto 1KM or part there off including crossing of lines, platform,ascent, descent, keeping without infringement as per instruction of site in charge. | — | — | — | 6,300 | |
| — | 220.00 | — | — | ||
| Dismantling of track structure from the old girder, stacking them properly and depositing the same to nearest P.Way store as directed by the site in charge. | — | — | — | 71,060 | |
| — | 220.00 | — | — | ||
| Linking of track including Guard rail over new girder as per relevant position in IRPM. | — | — | — | 69,960 | |
| — | 68.00 | — | — | ||
| Cutting of rails 90R/52Kg/60Kg inside or outside of the track for provision gap in the rail section for erection purpose. The rate shall include all labours, tools & tackles etc required to carry out the work complete in all respect. | — | — | — | 4,760 | |
| — | 204.00 | — | — | ||
| Drilling holes in 90R/52Kg/60KG rail inside or outside of track for provision of fish bolt for erection purpose. The rate shall include all labours, tools & tackles etc required to carry out the work complete in all respects. | — | — | — | 12,444 | |
| — | 1000.00 | — | — | ||
| Lifting of Track upto 150mm | — | — | — | 49,000 | |
| — | 4500.00 | — | — | ||
| — | — | — | 85,500 | ||
| — | 130.00 | — | — | ||
| — | 5575.00 | — | — | ||
| — | — | — | 3,01,050 | ||
| — | 120.00 | — | — | ||
| — | — | — | 56,400 | ||
| — | 2000.00 | — | — | ||
| — | — | — | 50,000 | ||
| — | 16.00 | — | — | ||
| Supplying and application of levelling coarse with epoxy morter of Dr fixit pedigrount EG-3 of M/s Pidilite Industry Ltd/ Sikadur 53 or similar of minimum thinckness 25 mm to provide even bed for fixing bed plate | — | — | — | 2,97,456 | |
| — | 352.00 | — | — | ||
| Supply, fabrication and fixing of H Beam sleepers including all fittings. | — | — | — | 1,15,43,136 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC-2022-ACS10_merged_compressed.pdf
ATTACHMENT
ShramikKalyan.pdf
ATTACHMENT
SHRAMIKKALYAN.pdf
ATTACHMENT
TenderDocument_Final.pdf
ATTACHMENT
GCC2022CorrectionSlipNo11_compressed.pdf
ATTACHMENT
JPODIGGING.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].