REPAIR TO SEWAGE LINE, MANHOLE COVER, DRAIN REPAIR, PATH, CLEANING OF SEWAGE LINE, BOUNDARY WALL AND OTHER ALLIED WORKS OF ANUJ VIHAR UNDER AGE B/R-I OF GE (SOUTH) DEHLI CANTT-10

Amount

Demolition of cement concrete (un-reinforced) of any description in ground floors and paving not exceeding 15 cm thick (below or above the ground level) complete all as specified and as directed.

Demolition of reinforcement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Desilting/desludging/cleaning of drains (covered/uncovered) of any size n.exc 1.5 m in depth and removing all blockage from drains such as plastic pieces, soil etc and removing the materials out side of cantonemet area complete all as specified and as directed.

M&L for 20mm thick screed bed or bedding layer of mortor 1:6 for laying floor finish complete all as specified and as directed.

S&F ultra design cement concrete coloured tiles 30cm x 30cm x 25mm thick with glossy finish with grey cement and pigment any pattern and any approved colour, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for cement concrete 1:2:4, Type B-1, using 20mm graded graded graded aggregate in roof kerbs of mud stops, rounded or chamfered on edges complete all as specified and as directed.

M&L for providing precast cement concrete 1:2:4, Type B-1, using 20 mm graded aggregate cover slabs for drain with size 600mmx450mmx100mm thick with and making necessary hole in subsequent distance (i.e 4 x hole in five rows) for ground watering in the drain set as in cement mortor 1:4 with plain fair faces, including chamfers weatherings, throating etc. and cleaning old material before setting in mortar complete with joints to match, including necessary form work complete all as specified and as directed. (Note : 8mm dia TMT bar min 4 Nos as in long span and 8 mm dia TMT bar min 5 Nos as in short span)

M&L for providing factory made cement concrete 1:2:4, Type B-1, 20 mm graded aggregate cover slabs for drain with size 450mmx450mmx100mm thick with and making necessary hole in subsequent distance (i.e 4 x hole in five rows) for ground watering in the drain set as in cement mortor 1:4 with plain fair faces, including chamfers weatherings, throating etc. and cleaning old material before setting in mortar complete with joints to match, including necessary form work complete all as specified and as directed.. (Note : 8mm dia TMT bar min 4 Nos as in long span and 8 mm dia TMT bar min 4 Nos as in short span)

M&L for cement concrete 12:4, type B-1, using 20 mm graded stone aggregate as in copings, kneders, apex stone, bed plates, parapets and railings up to 60 cm in height) including necessary form work complete all as specified and as directed.

Surface excavation in hard /dense soil n. exc 30cm deep and averaging 15cm deep and getting out complete all as specified and as directed.

M&L for Cement concrete 1:4:8, Type D-2 , using 40 mm graded stone aggregate, 100 mm thick, as sub-base and similar works complete all as specified and as directed.

S&F providing 60 mm thick mahine pressed precast concreted interlocking paver block (yellow and red) any shape and size confirming to IS-15658-2006, M-35 grade with grey cement and pigment over and including 40 mm sand coushning complete all as specified and as directed.

M&L for cement concrete 1:3:6, Type C-2, using 40 mm graded stone aggregate of thickness 75 mm, as in plinth protection, finished even and smooth w/o using extra cement complete all as specified and as directed.

Demolition of brick work built in cement morter complete all as specified and as directed.

M&L for Brick work with sub class "B" bricks , straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.

All as per Srl item No 14 above but except bricks.

M&L for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished even and smooth complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two coats of cement base paint, white or tinted (colour and shade as per new colour scheme approved by GE) over a coat of primer of same make including scaffolding for two/three storey building complete all as specified and as directed.

M&L for applying two coats of cement base paint, white or tinted on old wall plastered surface including preparation of surface complete all as specified and as directed.

M&L for providing, precast cement concrete 1:2:4, Type B-1, using 20 mm graded aggregate cover slabs for drain with size 600mmx600mmx100mm thick with and making necessary hole in subsequent distance (i.e 4 x hole in five rows) for ground watering in the drain set as in cement mortor 1:4 with plain fair faces, including chamfers weatherings, throating etc. and cleaning old material before setting in mortar complete with joints to match, including necessary form work complete all as specified and as directed. (Note : 8mm dia TMT bar min 5 Nos as in long span and 8 mm dia TMT bar min 5 Nos as in short span)

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in soft/loose soil complete all as specified and as directed.

M&L for PCC 1:2:4, Type B-2, using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

S&F rolled mild steel work as in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for escuring wire mesh etc.) including all necessary drilling, bolting or riveting etc and similar work conforming to GDE Fe 410-0 or Fe 310-0 complete all as specified and as directed.

S&F rolled mild steel work as in framed barred iron gates including all necessary drilling, bolting or riveting etc and similar work conforming to GDE Fe 410-0 or Fe 310-0 complete all as specified and as directed.

S&F 5-10mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long complete all as specified and as directed.

S&F Mild steel round bar 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hopping for colours hooking ends and binding with a including security bolts post and struts in fencing including cutting top to shape as directed drilling holes notching for wire etc. complete all as specified and as directed.

Supply only chain link MS galvanised fencing (Average weight n.exc 4Kg/Sqm) any size or type complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, strainig bolts, etc. including provision of binding wire complete all as specified and as directed.

M&L for preparation of newly steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Cleaning of sewage lines from 100 mm bore not exc 300 mm bore in cluding manholes by super suction machine with water jet pressurre, the suction wastage material will be collcet in tanker and disposed of out of MD land . All T&P will be provided by contractor including water for pressure to the entire satisfaction of Engr-in-Charge and testing by pouring water from manhole to manhole complete all as specified and as directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50 m in depth for manholes & sewage lines and getting out in soft/loose soil complete all as specified and as directed.

All as per Srl item No.33 above, but depth exceeding 1.50 m and not exceeding 3.00 m.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated materials to a distance exceeding 1.50Km but not exceeding 5 Km and depositing where directed at a level not exceeding 1.50m above the starting point in soft/loose soil complete all as specified and as directed.

Dismantling cast iron or reinforced concrete drain pipes upto 100mm, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.

M&L for 100mm bore cast iron spun pipes soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls or in floors complete all as specified and as directed.

M&L for 75mm bore cast iron spun pipes soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls or in floors complete all as specified and as directed.

S&F 100mm bore CI Sockets (double) collars complete all as specified and as directed.

S&F 75mm bore CI Sockets (double) collars complete all as specified and as directed.

S&F CI Bends (any radius), fixed to 100mm bore CI pipes complete all as specified and as directed.

S&F CI Bends (any radius), fixed to 75mm bore CI pipes complete all as specified and as directed.

Demolition & breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150 mm complete all as specified and as directed.

All as per Srl item No.44 above, but bore of pipe 200 mm.

M&L for concrete bed to 150 mm bore drain pipes in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregates including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

All as per item No.46 above, but bore of pipe 200 mm.

M&L for 150 mm internal dia salt glazed stone ware drain pipes laid in trenches on in floors and jointed complete all as specified and as directed.

All as per Srl item No.48 above, but dia internal of pipe 200mm.

M&L for cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required, Internal dia of pipe 150mm complete all as specified and as directed.

All as per Srl item No.50 above, but internal dia of pipe 200mm.

S&F in repairs cast iron Nahani trap with grating including jointing to waste pipe, fixed in cement concrete 1:2:4, type B-1, using 20 mm graded stone aggregate, dia of outlet 75 mm complete all as specified and as directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps complete all as specified and as directed.

M&L for cement concrete 1:3:6, type C-2, using 40 mm graded stone aggregates as in foundation,manhole bed filling and mass concrete complete all as specified and as directed.

S&F PVC (SWR) bends any radius 110mm dia fixed to PVC pipes complete all as specified and as directed.

S&F SFRC manhole cover 'medium duty' of overall size 560mm dia factory made complete all as specified and as directed. Notes: - (i) Make of SFRC Manhole and frame : (a) M/s Polycrete. (b) M/s KK Manhole. (c) M/s BRHL concrete industries.

S&F SFRC manhole cover 'medium duty' of overall size 450mm x 450mm factory made complete all as specified and as directed. Notes: - (i) Make of SFRC Manhole and frame :- (a) M/s Polycrete. (b) M/s KK Manhole. (c) M/s BRHL concrete industries.

M&L for Cement concrete 1:2:4, Type B-2, using 40mm graded stone aggregate as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc. complete all as specified and as directed.

Taking down cement plaster on brick/concrete surface including racking out joints heacking for key scrubbing down with water etc. complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for chequered cement concrete tiles of size 20cmx20cmx25mm thick in floors with grey cement and pigment over and including 20mm thick screed in CM 1:6, set and jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

Fixing only old & serviceable chequered cement concrete tiles of size 20cmx20cmx25mm thick in floors with grey cement and pigment over and including 20mm thick screed in CM 1:6 set and jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

S&F mild steel framed work using angle iron, flat iron fillet etc including necessary cutting,drilling,welding as required complete all as specified and as directed.

S&F in repairs Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Note :- The contract sum shall be after deducting the amount of Credit shown in Sch of Credit of this Tender.

SABHARWAL CONSTRUCTION CO.

A N BUILDERS

M/S Parmod Johar

UNIQUE BUILDERS

Shivam Firetech Engineers

MAA BHAWANI CONSTRUCTION

PG CONSTRUCTION AND COMPANY