6th FINANCE SCHEME WORK 2023 2024 Construction of Toilet 6 sheat and providing drilling of 6inch dia borewell and errection of submersible motor with HDPE tank 2000 litre at Government boys higher secondary school in Boothipuram Town Panchayat.

Amount

Earthwork excavation for foundation in all soils and sub soils in hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders and to full depth as may be directed,except in hard rock,requiring blasting including shoring and shuttering and bailing out of water wherever necessary,refilling the sides of foundation with excavated earth or sand in layer of not more than 15cm thick.well rammed and consolidated and depositing on bank with initial lead and lift of 10m & initial lift of 2m and depositing the surplusr earth within the compound in places shown by the departmental officers with iniital lead and lifts,clearing and levelling the site etc., complete as per SS20B and as directed by departmental Engineers(TNBP No.17,23,24).

Plain Cement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Course Aggregate) Using 40mm Brick Jelly metal including all cost conveyance of materials and labour charges including vibrating charges etc. complete as per standard specification and as directed by departmental Engineers(TNBP No.28).

Reinforced Cement Concrete 1:1.5:3 mix (One cement and One and a half Fine Aggregate and Three Coarse Aggregate) Using 20mm ISS HBG metal including all cost conveyance of materials and labour charges for curing,finishing but excluding centering,shuttering and cost of reinforcement grills, including vibrating charges etc. complete as per standard specification and as directed by departmental Engineers(TNBP No.30).

Supplying, fabricating and placing in position TMT steel Bar for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complying with standard specifications and as directed by the deparmental engineers. TNBP No:30

Supplying and erecting centering for sides and soffits including supports and strutting uptp 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened, welded with mild steel angles of size 25mmx25x3mm for boarding laid over silver oak (country wood) joist of size 10cmx6.5cm dia spaced about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre tocentre etc.complete complying with standard specification and as directed by the departmental engineers. TNBP No.30 Sq column

plain surface

Supplying and Filing with gravel in well rammed,watered consolidated including cost and conveyance of materials and labour charges etc., complete as per Standard Specification and as directed by departmental Engineers(TNBP No.24&25).

Brick Work in CM 1:5 (One part of cement & five parts of sand) mix using Third Class Country Brick Kiln Burnt bricks 8 ¾ " x 4 ¼ " x 2 3/4" including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing the concrete etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:31

Special Ceiling Plastering with CM 1:3 (One part of cement & three parts of sand)mix for 10mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:30,56&57

Plastering with CM 1:5 (One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:56&57

Finishing with top of roof with one course of machine pressed tiles of size 20cmx20cmx20cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same water proofing compound mixed with cement motar ,red oxide, etc.complete complying with standard specification as directed by the departmental officers. - 10 m2 TNBP No:44-I

Daddoing with first quality colour glazed tiles of 150 mm x 150 mm x 6mm size of approved make and quality and colour set in Cement Mortar 1:2 (One Cement and Two Sand) and pointing with white cement neatly including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers.TNBP No:special

Laying with first quality design ceramic tiles of all colours new ceramic tiles 305 x 305x 6mm tk for flooring and set in Cement Mortar 1:3 (one part of cement & three parts of sand)20mm thick and pointed with white cement including adding with suitable colouring pigments of match with the colour of tiles used and curing etc., complete.including cost and conveyance of all materials etc.and all labour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No.special

Laying with first quality design Kottastone of all colours new ceramic tiles 600 x 600x 6mm tk for flooring and set in Cement Mortar 1:3 (one part of cement & three parts of sand)20mm thick and pointed with white cement including adding with suitable colouring pigments of match with the colour of tiles used and curing etc., complete.including cost and conveyance of all materials etc.and all labour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No.special

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A

solid pvc door shutturs using 19gauge 19mm ms sqare tubes for styles and outer frames 15mm ms square tubes for top, lock and bottom rails. The steel tube shall be coverd with 5mm thick solid pvc sheets shuttur using 5mm thick solid pvc sheets for paneling shell regidly fixed in possition including necessary furniture and fittings the over all size of styles shell be 50mm X 30mm the over all size of top rail, lock rail and bottom rail shell be 75mm X 30mm. the over all size of frames shall be 50mm X 45mm, with suitable rabate for housing the shuttur. solid panal pvc door with frame.

Painting two coats with ready mixed enamel paint of'approved quality and colour over a priming coat, including cost and conveyance of all materials etc.and all lobour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A

Geology survey Charges etc.,

Drilling of 150mm dia bore well as to have a finished size of 6" dia bore well in hard rock area to any required depth as decided by the department officers including transporting from one place to another place etc

Supply and fixing of 180mm PVC casing pipe including cost and conveyance and all labor charges etc

Supply and delevery of 20LPM x 150m Head submersible motor with suitable panel board including all charges etc complete

Supplying and Delivery of pipes and pipe materials to site etc 2.5sqmm cable

32mm HDPE HOSE

32mm GI Elbow

32mm Coupling

63 Amps main switch

32mm GM Gate Valve

Bore cover

25 mm PVC PIPE 10 KG /cmSq

110 mm PVC pipe

90mm PVC Pipe

Kitty

Labour charge for the errection of submersible pump set in borewell inculding fixing jointing submersible cable with proper clamps up to starter to required depth and also fixing of riser pipe to the recquired depth including errection of clamps, presure gauge up to exterear wall of pump room and erection of pannel board consisting of TPICN switches starter,volt meter ammeter three pilot indicating lamps capacitor single phasing preventer water leval guard and laying and joinding of cable and twin earthing as per IE rules etc..,and testing the pumpset and trail run of ten days up to 5 HP

Weathering course with broken brick jelly of 20mm size mixing of slacked lime required ratio and required slope and as directed by the departmental officers, as per standard specification.

Removing the Exisiting Dameged Pressed Tiles inculding and all Labour Charges and etc Completed

Plain Cement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28).

Plain Cement Concrete 1:1½:3 Mix (one part cement, One and half part sand and three part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Supplying and Providing of Bitumen Felt 10mm thick Pad including cutting, fixing, labour charges and all cost and conveyance to work site.,etc,complete.

Supply and Fixing of 2000 Litter PVC Water Tank inculding and all Labour Charges and etc Completed

M. Pandiyan