Maintenance works at Old GM Building including Dy.CE/CN-I/UBL office Hubballi and circulating area.

M-Non-DSR and Non-USSOR items

Fabricating and fixing of glazed doors Of Size 1800X2400mm made of 12mm thick toughened glass with frost film fixed with necessary patch fittings - Top patch-SM1020, corner 2 patchlockO-Sm-1052E,f100r spring plate - lock keeper plate Srn-1052E, Noor spring - BTS 75V, magnetic locks etc, complete of droma make and as per architects instructions. door to be provided with 450mm long SS handles- PH2518S (Satin finish) KICH make with all contractors materials,labour, tools and plants,equipment's, machinery,transportation to site work etc.,complete as per the direction of Engineer-in- Charge Of the work.

"Providing and fixing PVC multiple hollow section of approved colour With tongue and groove fixture having wall thickness Imm and over all thickness 12mm in ceiling on existing frame work

"Providing and fixing Cooling film of 95 GSM for window glass of approved shade and 2 colour as per direction Of Engineer In charge. The work should be included men, materials, tools and plants,transportation etc, the work should be completed in all respect as per direction of engineer in charge."

Description: Providing and installation Of cubical portion for toilet area as per drawing including heed racks, vertical box section, corner section with powder coating including transportation, labour and fixing materials complete with all accessories door fittings to be fixed as per direction Of Engineer-in-charge

Description: Providing and installing Cubical Work Station consisting of 1 Table and surrounding 3 Sides Of 1200mmx1200mm thickness of 55mm with Size of each table 1500x750mm and 750 high, made Of 18mm thick High Density High Water resistant Processed wood and all exposed areas shall be finished with decorative laminate of approved shade and design and 2 unexposed surfaces are covered with balancing laminate including Keyboard Tray, cable Manager and Below Storage unit. Making provision for laying Of electrical wires and LAN wires to each table. Table top is supported with 38mmx38mm MS Tube. Rubber wood edge beading of Size 55x12mm at the joint of two work stations as per design. Providing below Storage unit for each tables of Size 400x400mm and 600mm high consisting of three drawers with 125mm Handles, telescopic drawer channel and drawer Locks . The work should be carried out as per direction of Engineer in charge including all men, machinery , material, transportation etc.

Description: Providing and installing Officer's table of size 1800x750x750mm with 18mrn thick High Density High Water resistant Processed wood and all exposed areas shall be finished With decorative laminate Of approved shade and design and unexposed surfaces are covered with balancing laminate pattern including keyboard tray, cable manager necessary 2 hardware. Side Table Of size 900x450x750mm with storage facility with two openable doors and necessary hardware like tower bolts, door magnets, handles and locks. Main table Below Storage unit shall consist of three drawers with telescopic drawer channels, 125mm handles and Drawer Locks. Providing below Storage unit for each tables of size 400x400mm and 600mm high consisting of three drawers with 125mm Handles, telescopic drawer channel and drawer locks. The work should be carried out as per direction Of Engineer in charge including all men, machinery , material, transportation etc.

"Description: Providing and installing PA table of size 1200x600x750mm with18mm thick High Density High Water resistant Processed wood and all exposed areas shall be finished with 2 decorative laminate of approved shade and design and unexposed surfaces are covered with balancing laminate pattern including keyboard tray, cable manager necessary hardware. Table Below Storage unit shall consist of three drawers with telescopic drawer channels, 125mm handles and Drawer Locks. The work should be carried out as per direction Of Engineer in charge including all men, machinery ,material, transportation etc."

A1-Horticulture and landscaping

Item Breakup - A-DSR items

77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP 17.73 brass screws with concealed fittings arrangement of approved quality and colour. 17.73.2 600 mm long towel rail with total length of 645 Each 10 708.95 7089.5 89 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. 17.78 Providing and fixing white vitreous china Each 8 14999.15 119993.2 extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern 90 with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the 18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 91 18.7.2 20 mm nominal dia Pipes Metre 40 335 13400 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 92 18.8.1 15 mm nominal dia Pipes Metre 40 497.8 19912 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes 18.9 jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 93 18.9.1 15 mm nominal dia Pipes Metre 150 244.7 36705 94 18.9.10 150 mm nominal dia Pipes Metre 50 6822.7 341135 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and 18.10 making good the walls etc. ( Internal work - Exposed on wall ) 95 18.10.6 50 mm dia nominal bore Metre 16 1048.35 16773.6 SWR-CONST-HQ-ENGG/SOUTH WESTERN RLY Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc. External work 96 18.12.6 50 mm dia nominal bore Metre 16 762.15 12194.4 18.15S BRASS FITTINGS Providing and fixing brass bib cock of approved 18.15 quality : 97 18.15.1 15 mm nominal bore Each 16 353.25 5652 Providing and fixing brass stop cock of 18.16 approved quality : 98 18.16.1 15 mm nominal bore Each 16 353.25 5652 Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 99 18.17.1 25 mm nominal bore Each 8 622.4 4979.2 100 18.17.4 50 mm nominal bore Each 4 1026.65 4106.6 Providing and fixing C.P. brass shower rose with 18.22 15 or 20 mm inlet 101 18.22.1 100 mm diameter Each 4 193.95 775.8 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 10000 11 110000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable locking 102 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 103 18.53.1 15mm nominal bore Each 8 574.3 4594.4 19.0 DRAINAGE 19.1S STONE WARE PIPES AND FITTINGS Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement 19.1 mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 104 19.1.2 150 mm diameter Metre 40 695.8 27832 105 19.1.5 300 mm diameter Metre 16 2064.15 33026.4 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 450 495.05 222772.5 106 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) SWR-CONST-HQ-ENGG/SOUTH WESTERN RLY For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 120 598.6 71832 107 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in 21.2 aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.1 Pre-laminated particle board with decorative Sqm 300 1139.3 341790 108 lamination on one side and balancing lamination on other side Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 50 1176.8 58840 109 (weight not less than 10kg/sqm) 22.0 WATER PROOFING 22.1S General 22.5 Providing and laying water proofing treatment Sqm 100 617.05 61705 in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) 110 Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. SWR-CONST-HQ-ENGG/SOUTH WESTERN RLY Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls 22.7 upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. "All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 22.7.1 With average thickness of 120 mm and Sqm 200 1684.6 336920 111 minimum thickness at khurra as 65 mm. Total 10931096.90

Item Breakup - A1-Horticulture and landscaping