WELCOME MAINT TO OFFICER S MD ACCN AND REPAIRS TO PLUMBING, TOILETS/SUNKEN FLOORS ETC, INTERNAL WIRING, ELECTRIC FITTINGS, FIXTURES, JOINERY, FLOOR, ROOF, HARDSTANDING AND CERTAIN WORKS IN E/M INSTALLATIONS AT MIRAN SAHIB UNDER GE JAMMU

Amount

M&L for preparation of old surfaces and applying one coat of white wash on walls complete all as specified and as directed.

M& L for preparation of old surfaces and applying two coat of cement base paint complete all as specified and directed. Make : Duracem (Berger paints), Gattucem (Asian paints), Snowcem plus.

M&L for preparation of old surfaces and applying two coat of white wash on ceiling complete all as specified and as directed.

M&L for preparation of old surfaces and applying one coat of synthetic enamel paint over wood surface of any description over 10 cm width or girth complete all as specified and as directed. Make: Asian paints (Apcolite), Berger (Luxol high gloss), Shalimar (Superlac).

M&L for preparation of old surfaces and applying one coat of synthetic enamel paint over steel surface over 10cm width or girth complete all as specified and as directed. Make: Asian paints (Apcolite), Berger (Luxol high gloss), Shalimar (Superlac).

M&L for complete removing of existing treatment on old surfaces of wall including cornices (plastered or unplastered) and applying 2 mm wall putty and applying two coat of Oil bound distemper any color over wall putty over one coat of primer complete all as specified and as directed.

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed including taking down old plaster. Note: - Applying two coats of cement based paint over one coat of primer. The rate deemed to be including in this item.

M&L for rendering 15 mm thick on fair faces mixing with water proofing compound as per manufacturer's instruction. (Water proofing compound paid for separately) of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement and applying two coats of cement base paint over a coat of primer over a hight of 12 Mtr complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for rendering 10 mm thick on faces other than fair of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Preparing new plastered surfaces and applying two coat of oil bound distemper on a coat of primer complete all as specified and as directed.

M&L for rendering 5 mm thick on ceiling or concrete surfaces in CM 1:3 finished even and smooth without using extra cement including three coats of white wash complete all as specified and as directed.

S&F in repair drapery curtain rod of metallic 20mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and as directed by Engineer-in-Charge.

S&F in repair fancy type drapery curtain rod of metalic 20mm dia covered with PVC coating complete with MS bracket golden colour rings and side caps fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screw complete all as specified and as directed by Engineer-in-Charge.

Dismantling of plain or corrugated, steel / Reinforced fibre glass sheeting any gauge thickness as in roof covering complete all as specified and as directed.

Prepainted galvalume aluminium zinc coated GI based corrugatd steel sheeting 0.5 mm thick of any colour having tensile strength 550 mpa as in roof covering fixed with self tapping screws including ridges complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated etc.) sheets in roof covering complete all as specified and as directed.

M&L for Asbestos cement sheeting 6mm thick ,corrugated or semi-corrugated sheets in roofs,wall etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed. Make : Everest, Charminar, Ramco

Description same as per Ser Item No 19.00 here-in-before but fixing only complete all as specified and as directed.

M&L for Asbestos cement two piece adjustable plain ridge 6mm thickness to suit corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts complete all as specified and as directed. Make : Everest, Charminar, Ramco.

Removing old tar felt, all loose dirt, cleaning the concrete / tiled surface with wire brush and applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and directed by Engineer-in-Charge.

20mm thick cement plaster in CM 1:4 over concrete surface finished even and smooth without using extra cement mixed with water proofing compound pidi proof LW @ 200ml per 50Kg cement as per manufacturer's instructions complete all as specified and as directed by Engineer-in-Charge. Note: - Rates quoted are including water proofing compound.

Supply and applying two coat of un diluted thick coat of acrylic reinforcement liquid applied elastometric water proofing membrane with UV resistant properties and solar reflective properties over one coat of primer (3:1 water dilution) before applying second coat, insert smart care roof tape corner / joints and allow it to dry then apply further coat complete all as specified and directed. Note :- Every coat time gap should be minimum 6 hrs. Make : Asian paints, Fosroc, Sika.

M&L applying two coats of aluminium paint on roof treatment all as specified and as directed.

S&F Water proofing treatment provided with polymeric water proofing membrane 90 micron weighing not less than 3 Kg / Sqm on prepared surfaces vertical / horizontal laid over a coat of bitumen 85 / 25 @ 1.20 Kg / Sqm, over a coat of bitumen primer 0.50 Kg / Sqm one coat of bitumen 85/25 @ 1.20Kg / Sqm shall be provided over water proofing membrane as per manufacturer's instructions complete all as specified and as directed by Engineer-in-Charge.

S&F cement concrete 25 cm X 25 cm X 22 mm thick machine pressed set and jointed in cement slurry and pointed in grey cement mixed with cresote oil including 15 mm thick bedding layer in CM 1:4 over water proofing treatment complete all as specified and as directed. Make:- O Tech, Mahindra, NITCO, EUROCON

M&L for cement concrete 1:2:4 type B-I (using 12.5mm graded crushed stone aggregate) as roof kerbs rounded or chamfered on edges complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre pulp / insulation) any thickness including cover fillets including taking down all electric fittings fixed with ceiling and refixig the same in position after repalcing the ceiling complete all as specified and as directed.

Providing and Fixing in position suspended false celling system using 'E' Grid suspended celling Grid system. The size of Grid shall be 600 X 600mm with GI frame work, main runner 39 X 24mm, cross tee 29 X 24mm and wall angle 22.2 X 22.2mm using 4mm thick high pressure stream cured non primered classic / designer variant 'E' Board ISI Marked IS No 14862-2000. Fibre cement 'E' Board to be placed in the gird of 'E' Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butter fly clips complete all as specified and as directed.

Re-screwing or easying and adjusting without taking down and tightening hinges in position including adjustment of existing iron mongery for shutter exc 1.5 sqm but n.exc. 2 sqm each (iron mongery if used shall be paid under relevant item) complete all as specified and as directed.

Taking down chowkhats or frames (without taking off shutters from the frames) exceeding 1.50 Sqm but not exceeding 4 Sqm each and removing from site all as specified and as directed.

Decsription same as per Ser item No 32.00 here-in-before but not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down shutters from the frame of any description exceeding 1 Sqm but not exceeding 2 Sqm each leaf and removing from site all as specified and as directed.

S&F pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and fixed all as specified and as directed.

Description same as per Ser item No 35.00 here-in-before but of size 125 x 60 mm complete all as specified and as directed.

M&L cement concrete (1:3:6) type C-0 (using 20mm graded crushed stone aggregate) filling in pressed steel chowkhats, bed block for holdfast and the like all as specified and as directed.

S&F 35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR (Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauge etc all as specified and as directed.

S&F 35 mm thick factory made wooden moulded panel door shutter with masonite facing on both side, two, three or four panel design as approved, made of solid core using machine filled rigid expanded polyurethane foam. The door facing plate shall be 3.2 m thick complete all as specified and as directed. Make: - Trehan door (Masonite door), M/s Sarab Enterprises, M/s Shiva Joinery and Furniture Industries, M/s Pioneer Timber Product.

S&F solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying, fixing in opening as per specification and drawing as in door / kitchen cabinet frame complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing as in kitchen cabinet / toilet shutter complete all as specified and as directed.

S&F Galvanized mild steel wire clothes power woven 0.46 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

Description same as per Ser item No 42.00 here-in-before but fixed in repairs complete all as specified and as directed.

Hacking out old broken glass panes (any thickness, size, quality or description) from wooden / steel frames, glazed with putty or fixed with beads complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares not exceeding 0.5 Sqm each pane complete all as specified and as directed.

Decsription same as per Ser item No 45.00 here-in-before but figured glass, pin head type complete all as specified and as directed.

S&F 300 mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding door bolt of extruded section complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts 150 mm size and fixed all as specified and as directed.

S&F 150 mm aluminium handle cast type complete all as specified and as directed.

S&F in repairs, mild steel enamelled helical door spring 200 / 150 mm (ISI Marked) size including roller and roller plate, fixed to wooden / steel frames by any means as required and complete all as specified and as directed by Engr-in-Charge.

S&F in repair floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.

M&L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and as directed.

M&L for preparing pre-primed steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Taking down existing cabinates and supply and fixing kitchen cabinate made from prelaminated particle board 18 mm thick any shade as approved including same colour edge bending. Board shall be cut to shape and size of shelves / Drawer etc complete all as specified and as directed by Engr-in-Charge.

S&F prelaminated particle board interior grade y fibre board 18 mm thick fixed as a shutter in kitchen cabinate including edge bending of same colour size, shape, colour as approved by Engr-in-Charge including self closing type CP hinges (02 No's in each shutter) and 100 mm stainless handle in each shutter complete all as specified and as directed.

S&F in repairs mild steel butt hinges 100 mm medium weight cold rolled complete all as specified and as directed.

S&F in repair 30mm width of flaps (when open), continuous (Piano) hinges mild steel bright finish or electro galvanised complete all as specified and as directed.

S&F 40 mm dia cupboard knobs fixed with nut and washer brass polished bright finished complete all as specified and as directed.

Demolition of concrete in ground floor not exceeding 15cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as specified and as directed by Engineer- in-Charge.

Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4 complete all as specified and as directed.

M&L for vitrified tiles any colour 10 mm thick (square / rectangular) polished as in floor, area of each tile not exceeding 0.36 sqm etc set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and shade, colour shall be decided by Engr-in-Charge complete all as specified and as directed.

Description same as per Ser item No 62.00 here-in-before but in vertical surfaces including 10 mm thick cement rendering / backing coat of cement in CM 1:4 complete all as specified and as directed.

M&L for any coloured non skid jointless ceramic tiles 6 to7 mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and shade, colour shall be decided by Engr-in-Charge complete all as specified and as directed.

Description same as per Ser item No 64.00 here-in-before but in vertical surfaces including 10 mm thick cement rendering / backing coat of cement in CM 1:4 complete all as specified and as directed.

M&L for non skid tiles coloured exceeding 0.06 sqm and n.exc 0.11 sqm, 6-7 mm thick of any colour pattern and 1st quality as approved by GE in floor set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and shade, colour shall be decided by Engr-in-Charge complete all as specified and as directed.

M&L for coloured glazed ceramic tiles glossy finish of size 450 x 300 x 5-6 mm thick in dado’s / skirting etc (1st quality) set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and shade, colour shall be decided by Engr-in-Charge including 10 mm thick cement motar CM 1:4 complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand (all by weight) complete all as specified and as directed.

Demolition of lean / cinder concrete filled in sunken slab, wire brusing the surface, cleaning all loose dirt by dusting / watering sunken portion of WC, Toilet etc and applying cement slurry @1.5 kg per Sqm complete all as specified and as directed.

Preparing surface of sunken slab and applying 15mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. Applying self adhesive, Elastomeric SBS bitumen based waterproofing membrane 1.5mm thick (Aluminium / terracotta) with a high mechanical performance with cross laminated Aluminium film on the upper side and easily removable silicon film on the underside, laid on roofs and sealing all joints after and including applying bituminous primer (approved by manufacturer's) @ 0.30 ltrs per square meter over clean and dry RCC roof surfaces complete all as specified and as directed. (NOTE : The work shall be executed through authorised applicator approved by the manufactures of membrane). both on floor as well as on wall of sunken floor and sunken floor shall be filled with graded cinder complete all as specified. Providing of 25mm dia PVC spout pipe of 450mm long. The rate deemed to be included in this item.

M&L for 16 to 18mm granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including taking down old complete all as specified and directed.

S&F in repairs bib taps long body suitable for 15mm bore pipe long neck fancy type brass CP with, capstan head screwed down, screwed for iron pipe or brass ferrule complete fixed in repair and all as specified and as directed.

S&F in repairs 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs cast copper alloy chromium plated fancy type central hole basin mixer with regular spout without Popup Waste System with 450mm long braided hoses suitable for 15mm bore pipe complete all as specified and as directed. Make: - Jaquar, Cera, Kohler

S&F in repairs brass chromium plated Wall Mixer with L bend provision over head shower arrangement with connecting legs, wall flanges and wall bracket for hand shower fixing with GI pipes 15mm dia complete all as specified and as directed. Make: - Jaquar, Cera, Kohler

S&F in repairs Chromium plated Jet spray suitable for pedestal pattern water closet with butterfly base and PVC connection pipe with CP brass check nut at one and suitable for 15mm bore pipe / fittings complete all as specified and as directed. Make: - Jaquar, Cera, Kohler

S&F in repairs cast copper CP concealed stop cock screwed down high pressure capstan head with CP flange suitable for 15mm bore pipe marked with hot or cold in the head complete including dismantling of tiles / any surface finishes and making good complete all as specified and as directed. Make: - Jaquar, Cera, Kohler

S&F in repair Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with capstan head complete all as specified and as directed. Make: - Jaquar, Cera, Kohler

S&F in repairs 15mm bore Pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed. Make: - Jaquar, Cera, Kohler

S&F in repair stainless steel sink 1mm thick overall size 915mm X 460 X 203 mm bowl size 410 x 330 x 203 mm with drainage board fixed in repair with plush washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and as directed by Engineer-in-Charge. Make : Bluestar, Diamond, Nirali.

Dismantling water tanks exceeding 500 and not exceeding 1000 ltrs complete all as specified and as directed.

S&F in repair 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge.

Description same as per Ser Item No 82.00 here-in-before but 1000 ltr capacity complete all as specified and as directed.

S&F in repairs vitreous chinaware water closet (Squat pattern) long pan of size 580mm x 440mm white with ‘P’ or ‘S’ trap front or back inlet and a pair of foot rest complete including provision of cement concrete bedding complete fixed in repair and all specified and directed by Engineer-in-Charge.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe fixed in repairs complete all as specified and as directed.

S&F in repairs PVC valve less syphon action type low level flushing cistern 8-10 litres capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stainless steel with long bend of 32mm dia complete all as specified and as directed. Make : Hindware, Cera, Jaquar.

S&F in repairs 15mm dia PVC connection with brass check nut of length 450mm complete all as specified and as directed.

S&F in repairs 15mm dia PVC connection with brass check nut of length 600mm complete all as specified and as directed.

S&F in repairs 32 mm dia bore PVC flexible pipe for wash hand basin complete all as specified and as directed.

S&F in repairs Vitreous chinaware wash hand basin white, flat back of size 550 x 400 mm excluding tap but including brackets fixing to wall and two No's 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete all as specified and as directed. Make: - Jaquar, Cera, Kohler

S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including spreader complete all as specified and as directed.

S&F in repair towel rack 600mm long with lower hangers fixed with and including chromium plated brass screw and wooden / Plastic cleats complete all as specified and as directed.

S&F in repair towel rail 600 mm long of PTMT fixed with and including chromium plated brass screw and wooden / Plastic cleats (Minimum weight 190 Gm) complete all as specified and as directed.

S&F in repairs Overhead Shower 150 X 150 mm square Shape Single Flow (ABS Body Chrome Plated) complete all as specified and as directed.

S&F in repair Toilet paper Holder with flip complete all as specified and directed by Engr-in-charge.

S&F in repair soap dish in postion complete all as specified and directed by Engr-in-charge.

S&F in repair Cabinet mirror plastic body for toilet of size 350 x 600mm with 4mm thick looking mirror complete all as specified and as directed.

Taking up or down GI tubing 15mm bore including cleaning for refixing complete all as specified and as directed.

Description same as per Ser item No 99.00 here-in-before but 20mm bore complete all as specified and as directed.

S&F 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf / cm² fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed. Make: - Finolex, Jain Irrigation System, Reliance.

S&F 20 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm² fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and as directed. Make: - Finolex, Jain Irrigation System, Reliance.

S&F in repair 100 mm dia stain less steel grating with waste hole complete all as specified and as directed.

S&F in repair 100mm / 75 mm stain less steel grating complete all as specified and as directed.

S&F box type steel windows / Ventilator (factory made) outer frame made out ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3. Note: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20 X 5 mm iron flat 200 mm long. (iii)10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs. (v) Two coats of synthetic enamel paint.

S&F in repair two track sliding aluminium windows made of powder coated 1.15mm thick aluminium sections sliding shutter made of 39 X 20mm aluminium section, outer frame side should be 60mm X 38mm including sliding channels 5mm thick tinted / normal glass wire guage and aluminium grill 75mm pitch diamond shape, wire gauge and grill shall be fixed with the help of 40mm aluminium flat complete, including necessary joining cleats, glazing clips, rubber packing hinges all as specified and directed by Engr-in-charge.

S&F in repair plate rack stainless steel of size 600 X 900mm fixed with washer and plugs complete.all as specified and as directed.

S&F in repair CP health faucet with 1 mtr long CP flexible pipe complete all as specified and as directed. Make: - CERA, JAQUAR, ARITIZE

S&F in repair shelf of PTMT with and including chromium plated brass screws and wooden cleats (Minimunm weight 300 Gm) complete all as specified and as directed.

S&F IN REPAIR VITREOUS CHINA WATER CLOSET SINGLE PIECE WITH PP SOFT CLOSE SEAT COVER HINGE FIXING ACCESSORIES SET AND CISTERN FITTING , OF WC SIZE 360 X 640 X 685 MM COMPLETE ALL AS SPECIFIED AND AS DIRECTED. MAKE: - JAQUAR, CERA, ARTIZE.

S&F in repairs brass chromium plated Wall Mixer four in one with L bend provision over head shower and hand shower arrangement with connecting legs, wall flanges and wall bracket for hand shower fixing with GI pipes 15mm dia complete all as specified and as directed. Make: - Jaquar, Cera, Artize

M&L for cleaning of water storage tank of capacity 500 litre completely by removing all scale dirt / dust of any description with chlorine complete all as specified and as directed at site including taking down and refixing of tank at the same place. Note: - Any damage will be rectified by the contractor at his own risk and cost.

Dismantling of steel work of any type all as specified and as directed.

S&F Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins etc confirming to Fe 410W- Gde E - 250 quality A complete all as specified and as directed.

S&F mild steel framed works such as grills, framed guard bars and cooler stand similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height all as specified and as directed. Make: - Supreme, Ashirwad, Finolex

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed. Make: - Supreme, Ashirwad, Finolex

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - All plumbing works shall be laid or fixed as to be completely air tight or water tight as specified and Contractor will furnish its certificates towards air / water tight before completion of work under the Contract. NOTE NO 4: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

E/M PORTION :- Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches,sockets, ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into existing concealed PVC rigid/steel conduit and into existing CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note : (a) wiring shall be done by using proper colour coding (b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engr-in-Charge.

Description all as per serial item No 120.00 here-in-before but One 5 pin socket outlet 5 amps on the same board complete all as specified and as directed.

Description all as per serial item No 120.00 here-in-before but One 5 pin socket outlet, 5amps, independent complete all as specified and as directed.

Description all as per serial item No 120.00 here-in-before but for one 5 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed.

M&L for replacement of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as directed by Engr-in-Charge. Note:- Distribution board and MCBs should be same make.

M&L for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as directed by Engr-in-Charge. Note:- Distribution board and MCBs should be same make.

M&L for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as directed by Engr-in-Charge. Note:- Distribution board and MCBs should be same make.

S&F in replacement MCCB 4 pole, 415 Volt fixed thermal and fixed maganatic setting of cap 125 Amps 16 KA complete all as specified and directed.

S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair 415V 10KA 'B' curve TPN 40 To 125 AMP miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

S&F in replacement for switch piano, flush type single pole one way 5Amp, 240 volts complete all as specified and directed.

S&F in repair for switch piano, flush type single pole one way 15 Amps, 240 volts complete all as specified and directed.

S&F in replacement Socket outlet 2 in 1, 3 pin, 5A complete all as specified and directed.

S&F in repair Socket outlet 5 pin, 15 Amp, flush type, 240 Volts, 6 pin flush type complete all as specified and directed.

S&F in replacement Switch socket outlet combined 5 pin 5 amp flush type, 240 volts complete all as specified and directed.

S&F in replacement Switch socket outlet combined 2 in 1, 3 pin 5 amp and 15 amp flush type, 240 volts complete all as specified and directed.

S&F in repair for bell push, flush type single pole, 5Amp, 240 volts complete all as specified and directed.

S&F in repair Ceiling Rose 3 terminal surface type complete all as specified and directed.

M&L in replacement for Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

M&L in replacement Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and directed.

S&F in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95 , 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and directed.

S&F in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement bulk head luminaries IP65 with opal diffuser 10 watt, 230 Volts LED type complete with 10 watt LED Bulb complete all as specified and directed.

S&F in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and directed.

S&F in replacement Calling bell Ding Dong/buzzer AC 230 Volts, single pole complete all as specified and directed.

M&L in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length. Note : Wiring shall be done in proper colour coding.

M&L in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 4 Sqrmm for phase and neutral and one run of 2.5 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note : Wiring shall be done in proper colour coding.

M&L in replacement copper cable for circuit with proper existing colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2.5 Sqrmm for phase, drawn through the existing rigid PVC concealed conduit fixed on wall including taking down existing unsv wiring complete all as specified and directed.

M&L in replacement copper cable for circuit with proper existing colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 1.5 Sqrmm for phase, drawn through the existing rigid PVC concealed conduit fixed on wall including taking down existing unsv wiring.

S&F in replacement unsv wooden/CI Shunken box with new CRCA presseed steel terminal box of size 7X4' incl taking down old complete with cemented and patch work all as directed by Engr-in-Charge.

S&F in replacement unsv wooden/CI Shunken box with new CRCA presseed steel terminal box of size 4X4' incl taking down old complete with cemented and patch work complete all as specified and directed.

S&F in replacement unsv wooden/CI Shunken box with new CRCA presseed steel terminal box of size 10X8' incl taking down old complete with cemented and patch work all as directed by Engr-in-Charge.

Supply and fixing in replacement Bakalite hylum Sheet 3 mm thick complete with cutting and making size for fixing switches (06 Nos each) of size 8''X5'' complete all as specified and directed.

Supply and fixing in replacement Bakelite hylum Sheet 3 mm thick complete with cutting and making size for fixing switches (12 Nos each) of size 12''X10'' all as specified and directed.

Supply and fixing in replacement Bakelite hylum Sheet 3 mm thick complete with cutting and making size for fixing switches (02 Nos each) of size 5''X5'' complete all as specified and directed.

Supply and fixing in replacement plug top 15 Amps complete all as specified and directed.

Labour for repair/servicing of ceiling fan of any capacity complete with strip opening the ceilling fan for repair/washing/warnishing and removing of old lubricating substance from bearing/bush using Kerosine oil, carying out fresh lubrication using grease and to make the ceiling Fan noise free for smooth funct ioing, including replacement of worn out/unserviceable minor spare parts split pin,fan body bolts,spring washer,fan rod bolt etc and PVC insulated, unsheathed stranded twin twisted copper conductor cable of size 1.5 Sqmm up to 1.0 M long, assembling the repaired ceiling fan and testing to the entire satisfication of engineer in charge and depositing in MES Store yard . (Replacement of Spares flexible wire etc/rewirding of ceiling fan/shall be measured and paid seperately under respective item for material and labour cost .)

Description all as per serial item No. 159.00 here-in-before but for exhaust fan of any type mm sweep complete all as specified and directed.

Rewinding of ceiling fan, of any make/type and size (1200/1400 mm sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per menufactures specification, including replacement of ball bearing , bushing system,capacitor of required capacity,PVC Connector,PVC Clamp,GI/MS anodized bolts,nuts,washer,MS clamp for down rod of suitable size,painting with existing colour,all insulation materials, varnishing, heating, drying, assembling of stater/rotor, connection & testing complete all as specified and directed.

Description all as per serial item No. 161.00 here-in-before but for exhaust fan of any make/type and size complete all as specified and directed.

Supply and connection of PVC insulated, unsheathed stranded, three core twisted copper flexible cable of size 1.5 Sqmm as required including taking down complete all as specified and directed.

Supply and fixing only bush of suitable size for exhaust fan of any type/size as per existing type including taking down complete all as specified and directed.

Taking down serviceable/unsv geysers by opening/dismentaling GI fittings and pipes and kept at site and refitting after necessary repair/replacement of any defective parts,painting and refitting in position after repair complete all as specified and directed. Note: Spare will be measured and paid separately. Rates are deemed to be including charges for replacement of geyser parts.

Supply only thermostat , switch electric water heater storage type of cap 25/ 50 ltr, 230 volts of existing make of geyser including taking down complete all as specified and directed.

Supply only heating element with triangular/round base, single phase, 230 volt, cap 1.5 KW of existing make including taking down complete all as specified and directed.

M&L for replacement pressure release valve conforming to relevant IS 15mm bore suitable for fixing with GI pipe/tubing 15mm bore complete all as specified and directed.

M&L for replacement of indicator lamps round/rectangular type 230 volt AC suitable for geyser of any capacity including providing electric connections complete all as specified & directed.

Material and labour for replacement rubber Gasket heavy duty of water inlet outlet assembly suitable for 25 ltrs capacity Geyser complete all as specified & directed.

Notes :- (i) For Serial No 119 to 170 : The Contractor has to complete the work assigned for above items with in 72 hrs failing in which recovery at the rate 25 Rs. Per complaint per day. (ii) For Serial No 119 to 170: The contractor has to complete the work assigned for said items with in 10 days from issue of fan through gate pass failing in which recovery at the rate of Rs. 25 per day per complaint shall be deduct. (iii) The MES Department is not responsible for the payment of staff hired by contractor for complaint rates for attending the complaints by the electrician are deems to included in the item for repairing i.e. Electrician/Helper, as all the items of CA are to be supply and fixed by the contractor. (iv) Proper record (date wise) of complaints received & rectified by the contractor shall be produced for verification at the time of payment of each RAR/Bill. (v) All the complaint slip,register and connected document will be provided by the contractor without any extra cost. (vi) After any repair the site has to be cleaned and make the surface good.

N S MANHAS

Bidder Name

N S MANHAS

M/S A TO Z ENGINEERS