265/2025/OM

Amount

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour , including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats old iron work for doors, windows and ventilators using iron bars, window grills weld mesh screen in opt courtyard etc., with two coat synthetic enamel paint and approved quality and color including priming coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc., complete complying with standard specifications..

1. Manual operating main door size 1200mm*1300mm*230mm mild steel fiber blanket lining suitable shaft 60mm DIA, 400mm DIA castiron, pulley, blumpur block 60mm bearing 2 nos, 12mm rope door tightening, counter weight box, door drive shaft, connecting 20mm pitch chain. Door handle fully covered MS sheets, Service and replacement of manual body loading trolley, long 2.7mtrs, width 900mm, using material, 100*50*6 channel frame, trolley moving wheel, trolley lifting movement assembly set.

2. Supply and fixing of venture scrubbing unit ID blower with 5HP motor water scrubbing 1 hp pump with motor, High speed SS impeller, scrubbing pipes 400mm DIA 2.5mm thick, 304 SS grade, 2.5 mtr height, connecting 230mm DIA SS pipes, 1.7mtr height connecting bend pipes furnace to scrubbing unit, including material and labour charges etc.

3. Pipelines and ducts main furnace to scrubber, scrubber to blower, blower to chimney, 230mmdia, 3.5mmthick approximately 20mtr long connecting welding, flanges, bolt nut, material and labour charges etc.

Electrical connecting power cables and fuses main board to panel, panel to blower motor, pump motor, thermo cuppled , commencity cables, including materials and labour charges etc

5. Dismantling charges of old curved damaged machinery, Transport and erection and commissioning, all machineries and whole items including labour charges etc.

6. Service and replacement of damaged body crematorium chamber using material, refractory castable fire create, standard 40% alumina bricks, cast-iron frames, fire clay chamber size 3000 L* 1000mm width * 1000mm height.

7. Supply and fixing of semi auto control LPG firing burner systems (4 nos) fixing 20 cylinder manifold, NRV, high pressure hoses, adaptors, pressure regulator, pressure dial guage, pipelines 25mm DIA OD, steemless pipes, ball valves. control panel connecting 10core cables, ON/OFF control each burner, solenoid valves, auto blower, sparking tungsten rod, ID blower, 5HP motor, 1HP spray pump, thermocouples, temperature controller, material and labour charges.

8. supply and fixing of manual LPG firing system, tublex burner making ( Cr/Ni) material, burner size 75mm OD , 800mm long, SS304 outershell, burner insulator, fibre blanket upto 1200 degree, suitable pipelines, non return valve etc.