PROVN OF CUBICLES AND CABLE TRENCH AT CERTAIN OTM ACCNS AND CERTAIN OTHER MINOR/REVENUE WORKS AT AF STN BIHTA

Amount

S&F Powder coated (thickness of powder coating minimum 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated (thickness of powder coating minimum 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

M&L for 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws, complete all as specified and directed.

Supply only sheet glass 5.50 mm thick, ordinary quality, cut to size as required at site, complete all as specified and directed. (Cost of fixing of glass shall be deemed included in the unit rates of aluminium door/window shutters)

S&F door closer hydraulically regulated, aluminium die cast body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm width and weight between 61 to 80 Kg and fixed, complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F mortice lock, made of brass, vertical type, size 100 mm, mild steel, 4 levers, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and and in any position not otherwise specifically provided for and removing rubbish from premises, complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation etc or for posts, column footings etc not exc 10 Sqm on plan and getting out in soft/looe soil, complete all as specified and directed.

M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc, complete all as specified and directed.

M&L brick work with pulverized fuel Ash-lime bricks (Fly ash bricks - non modular size), straight or curved on plan exc 6 m mean radius, built in CM 1:6, complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4 finishing surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L applying three coats of white wash after preparation of new plastered surfaces of walls, complete all as specified and directed.

Returning filling in soil including spreading, leveling, watering and well ramming in layers not exc 25 Cm, complete all as specified and directed.

Removing excavated materials (soil) not exc 50 m distance and depositing where directed at a level not exc 1.5 m above starting point, complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in cills, coping, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary Formwork, complete all as specified and directed.

M&L mild steel work as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F rolled mild steel as in 5 mm thick Plates (chequered), channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, conforming to Fe 290 (Gde-E- 165), complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), laid in panels, finished even and smooth without using extra cement, complete all as specified and directed.

S&F glass dividing strips 3 mm thick and 38 mm wide, fixed in position to conform to design, complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) 100 mm thick as in sub base, sub floor etc and the like, complete all as specified and directed.

Demolition of brick work/stone boulder masonry, built in CM incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises, complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2, using 40 mm graded stone aggregate, as in sub base of floors etc, complete all as specified and directed.

M&L brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6, complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressumers, lintels etc, complete all as specified and directed.

Formwork (for fair finished surfaces) to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and directed.

M&L mild steel TMT bars, 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for column, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

~Ditto~ but 5 to 10 mm dia mild steel TMT bars as in stirrups, spacers and binders etc complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick/concrete surfaces in CM 1:6 finishing surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instructions finished even & smooth without using extra cement, complete all as specified and directed. Note: WPC will be measured and paid seperately under respectve item.

Supply only approved ISI market integral water proofing compound, complete all as specified and directed.

M&L for coloured vitrified tiles (dark shade), 10mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for coloured vitrified tiles (dark shade), 10mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, fixed on walls etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 10 mm thick CM backing in CM 1:4, complete all as specified and directed.

M&L for applying two coats of cement based paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces, complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying 2 mm thick wall care putty in layers of opposite direction as per manufacturer's instructions and over it applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and directed.

M&L complete removal of existing treatment from surfaces of walls and applying 2 mm thick wall care putty in layers of opposite direction as per manufacturer's instructions and over it applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and directed.

M&L rolled mild steel work in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rail and guides for sliding doors, fixing with angle cleats or other connecting pieces, conforming to Fe 410-W (Gde - E-250) quality-A, complete all as specified and directed.

M&L for preparing new steel surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chromate primer, complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.

M&L for 12 mm thick gypsum board as in ceiling, fixed with screws as per manufacturer's instructions, complete all as specified and directed.

M&L Gl frame work for false ceiling including necessary supporting arrangement for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 No.) suitable handle (1 No), complete all as specified and directed.

Supply only figured glass, pin head type, 6 mm thick, ordinary quality, cut to size as required at site, complete all as specified and directed. (Cost of fixing of glass shall be deemed included in the unit rates of aluminium door/window shutters)

Supply only sheet glass 4 mm thick, ordinary quality, cut to size as required at site, complete all as specified and directed. (Cost of fixing of glass shall be deemed included in the unit rates of aluminium door/window shutters)

Supply only stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, cut to szie as required at site, complete all as specified and directed. (Cost of fixing of wire cloth shall be deemed included in the unit rates of aluminium door/window shutters)

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F mortice lock, made of brass, vertical type, size 75 mm, mild steel, 4 levers, complete all as specified and directed.

S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed.

S&F stainless steel tubular curtain rods, 25 mm dia, with fixing brackets and one pair of decorative end caps etc, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting of any gauge/thickness from roofs and wall covering, complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coating GI based Plain steel sheet crimped eaves and steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section in any position, complete all as specified and directed.

Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM 1:6 finishing surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L Glazed ceramic coloured tiles on vertical surfaces 350x 250x7 mm/450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

Taking down chowkhat or frames not exc 1.50 Sqm each with shutters (without taking off shutters from the frame), complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (stile) with 2, 4 or 6 raised panels designed with 2 mm thick moulded PVC sheet on the front face and 2 mm plain coloured PVC sheet on back face, supplied and fixed to frame at site as per specification and drawing with wood free EPS core, complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.

S&F 4mm thick sheet glass, obscured or frosted on one side, ordinary quality and glazing with oil putty etc in squares n.exe 0.50 Sqm in each pane, complete all as specified and directed.

M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

M&L for 2nd class hard wood (Hollock) glazed and skeleton shutters 35 mm thick, factory made, open rebated and prepared to receive glass, gauze, etc., edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b); supplied and fitted to chowkhats complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws, complete all as specified and directed.

S&F 250 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

M & L for preparation of new or previously untreated wood or wood based surfaces exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L PCC 1:3:6, type C-2 using 40 mm graded stone aggregate, 75 mm thick as in plinth protection/path/pavings etc, finished even and smooth without using extra cement complete all as specified and directed.

M&L hardcore (broken stone) of gauge not exc 63 mm, deposited spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm dia, single socketed, in any length with rubber ring joints and fixed to walls, complete all as specified and directed.

S&F PVC (SWR) bend 75 mm bore, any radius, incl jointing to waste pipe with solvent cement, complete all as required and as directed.

S&F PVC (SWR) floor trap including jointing to waste pipe with solvent cement, diameter of outlet 75mm, provided with and including stainless steel grating, complete all as specified and directed.

Taking up or down steel tubing 15 mm dia and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 15 mm dia GI tubing, medium grade, with all fittings and fixed complete to walls, ceilings and floors, complete all as specified and directed.

Cutting chases pinning in, making good to facing where required and pointing in CM (1:3) to ends of edges of landings, shelves, cills, lintels etc and making good cutting, girth exc 10 cm but n.exc 20 cm in brick walls complete all as specified and directed.

S&F vitreous china wash hand basin white with flat back of size 550x400 mm, excluding chain and plug, taps and porcelain stopper but incl PVC waste pipe of 32 mm dia, CP brass waste coupling of 32 mm bore & a pair of cast iron brackets of appropriate size, complete all as specified and directed.

S&F 15 mm bore fancy type pillar taps, cast copper alloy, with capston heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts, screwed to PVC Connection and fixed, complete all as specified and directed.

S&F in repair anglular stop cock 15 mm nominal dia, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed, complete all as specified and directed.

S&F in repair bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm dia GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F 10 Ltr vitreous china valveless syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle incl PVC flush pipe of 32 mm dia, fixed to wall, complete all as specified and directed.

M&L for wooden texture finish coloured vitrified tiles (dark shade), 10mm thick (square/rectangular) area of each tile exceeding 0.42 Sqm but not exceeding 1.0 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for wooden texture finish coloured vitrified tiles (dark shade), 10mm thick (square/rectangular) area of each tile exceeding 0.42 Sqm but not exceeding 1.0 Sqm, fixed on walls etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 10 mm thick CM backing in CM 1:4, complete all as specified and directed.

S&F rolled mild steel work conforming to Fe-290 Gde E-165 as in desert cooler stand including flat iron thresh hold, bracings etc as required at site, including cutting to shape/size required and provided with necessary nuts, bolts, washers, welding etc, fixed to walls with fasteners, complete all as specified and directed. (Supply only of fasteners shall be measured and paid separately).

Supply only 12 mm dia GI fasteners, 100 mm long, complete with nuts and washers etc., complete all as specified and directed.

Excavation in post holes (or similar holes) Each n exc 0.50 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance of n exc 50m and making good surface in soft/loose soil, complete all as specified and directed.

M&L PCC 1:3:6 type C-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc, complete all as specified and directed.

M&L rolled mild steel work in post and struts etc and the like, fixing with angle cleats or other connecting pieces, conforming to Fe 410-W (Gde - E-250) quality-A, complete all as specified and directed.

Cutting chases pinning in, making good to facing where required and pointing in CM (1:3) to ends of edges of landings, shelves, cills, lintels etc and making good cutting, girth not exc 10 cm in brick walls, complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 mix, type B2 (using 40mm graded stone agg) as in path/hard standing etc, laid in panels, complete all as specified and directed.

Finishing surfaces of concrete roads, pavements, hardstanding etc by brooming, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (Light/Fan/Socket/power) complete including fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. and making good the disturbed surfaces of walls/ floors etc by using plaster and wall care putty, complete all as specified and as directed.

Material and labour for concealed point wiring ,using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with FRLSH PVC insulated and unsheathed stranded copper conductor cable 1.5 sqmm single core conforming to IS 694 including medium grade concealed PVC conduit conforming to IS 9537 (part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thickness of required size including painting terminal boxes inside and outside with two coat of synthetic enamel paint over one coat of red oxide primer with top cover 3 mm thick bakelite laminated sheet with brass screws and cup washer with all assessories including FRLSH PVC insulated and unsheathed stranded copper conductor cable 1.5 sqmm single core in green colour as earth wire connected to earth dolly, complete all as specified and directed . (a) One light/fan/exhaust fan point controlled by 1 No. one way 5/6 Amp switch.

(b) One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No. one way 5/6 Amp switch on same board along with other switches, fan regulator etc.

(c) One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No. one way 5/6 Amp switch on independent board.

Material and labour for point wiring, using approved colour coding (Phase-red, Neutral-black, Earth-green) complete for one socket outlet 15 Amp on independent board with FRLSH PVC insulated and unsheathed stranded copper conductor cable 2.5 sqmm single core conforming to IS 694 including medium grade concealed PVC conduit conforming to IS 9537(part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxes inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer with top cover 3 mm thick bakelite laminated sheet with brass screws and Cup washer with all assessories including FRLSH PVC insulated and unsheathed stranded copper conductor cable 2.5 sqmm single core in green colour as earth wire connected to earth dolly, complete all as specified and directed.

S&F Switch Socket combination 2 in 1, 3 pin 5 Amp and 3 pin 15 Amps, flush type, universal, 220 volts AC, complete all as specified and directed.

S&F Switch Socket combination 2 in 1, 3 pin 5 Amp and 2 pin 5 Amps, flush type, universal, 220 volts AC, complete all as specified and directed.

S&F for socket outlet, 5 Pin, 5/6 Amp flush type conforming to IS 1293 ISI marked, complete all as specified and directed.

S&F switch piano flush button single pole one way 5/6 Amp, 240 Volts conforming to IS 3854 ISI marked, complete all as specified and directed.

S & F ceiling rose, surface Bakelite, isolated body, three terminals, complete all as specified and directed.

Supply & fixing ceiling fan regulator, electronic type, five step rotary type, 220 volts AC, complete all as specified and as directed.

Taking down carefully old submain wiring of any size, complete all as specified and as directed.

Taking down carefully old MCB DB including MCB's fixed in it of any size, complete all as specified and as directed.

S&F in replacement sheet metal enclosures (MCB Distribution board) when MCB’s to be used single pole and neutral 4 ways 220 volt with 200 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching all as specified and directed.

S&F in replacement sheet metal enclosures (MCB Distribution board) when MCB’s to be used single pole and neutral 8 ways 220 volt with 200 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching all as specified and directed.

S&F MCB single pole and neutral 240 volt, 10 KA, 32-40 Amp, 'C' series conforming to IS 8828 of 1996, complete all as specified and directed.

S&F MCB single pole 240 volt, 10 KA, 6 to 32 Amp, 'C' series conforming to IS 8828 of 1996 complete all as specified and directed.

S & F sub main wiring using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with two single core FRLS PVC insulated and unsheathed stranded copper conductor cable 6 sqmm as current carrying conductor and one run of 6 sqmm as neutral cable, voltage rating 1100 volt, ISI marked drawn in and including medium grade concealed PVC conduit ISI marked of dia not less than 25 mm and thickness 2 mm with standard accessories along with one run of FRLS PVC green colour insulated, unsheathed, stranded copper conductor of size 6 sqmm as earth cable,complete all as specified and directed including taking down old one. Note: Two run of single core FRLS PVC cable with one run of earth contunity conductor and conduit shall be measured as one unit.

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead strip of 32x6 mm as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 40 mm bore for protection of GI wire from earth electrode to test point /machinery / equipment, supplying and laying charcoal dust comman salt PCC (1:2:4) type B1 using 20 mm graded stone agregrate chamber and RCC cover 54 cm X 54cm x50 mm thick (1:2:4) type B-1 using 20 mm stone agrigrtae ) reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, using round bar, PGI funnel with wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in electrical plate No-3 of SSR part-1 including testing and taking out the old one complete all as specified and directed Note - Cost of GI strip and GI protection pipe up to a distance 7.5 M shall be included in quated rate of above Items.

Supply, Laying, jointing and testing of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable, heavy duty, with 16 Sqmm, 4 core aluminium conductor, 1100 Volts grade, complete all as specified and directed.

Supplying and erecting in true vertical position steel tubular swaged pole, 9 metres long, type 410 SP-31, complete with cast iron base plate, pole cap, finial taper plug, bolts, nuts, washers etc including necessary earth work and excavation, PCC in foundation 1:3:6 type C2, using 40 mm graded stone aggregate and PCC 1:2:4 type B2, using 40 mm graded stone aggregate as in plinth block, disposal of surplus soil to a distance not exceeding 50 m,painting two coats of aluminium paint over one coat of red oxide primer including 3 nos band/straps with blue colour (300mm wide each) synthetic enameled paint at a distance 300mm from plinth; block and marking pole nos with black synthetic enameled paint including tarring one coat on steel surface embedded in concrete, complete all as specified and directed.

M&L for laying of bricks subclass ‘B’ old size laid flat perpendicular to the direction of cable for protection of cable complete all as specified.

M&L clean dry river washed sand filling in trenches around underground cable, complete all as specified and directed. (Note: Depth of sand shall be measured after punning.)

S&F LED street light fitting complete 60 Watt with high power energy saving pressure die cast aluminium IP 66 roadway luminiares, heat resistant toughened glass with frame, better optics for uniform distribution with high power LED as Light source, complete all as specified and as directed.

Supply & fixing 16 watt decorative batten type LED light fittings, 1.20 m long, complete with all accessories, internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed.

Supply & fixing 20 watt decorative batten type LED light fittings, 1.20 m long, complete with all accessories, internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed .

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) , complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 600 mm sweep, BEE Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, including disconnecting and taking down old one, complete all as specified and directed.

Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers, including disconnecting and taking down old one, complete all as specified and directed.

Supply and fix desert cooler, electric driven (single phase0, having nominal air flow capacity of 5000 Cum per hour (or nearest size), steel body with 80 litre water storage capacity including all accessories such as submersible pump, four step regulator, on/off switch etc and making all electrical connection, complete all as specified and directed.

Supply and fix 400 mm sweep wall mounted fan, off white colour with oscillation on - off pull code control for speed, aerodynamically designed and balanced blades, speed 1350 RPM, 230 volts AC, air delivery 72 cmm including thermal overload protector (TOP), noise level 63.2 db, complete all as specified and directed.

M& L for fixing cable junction box LT 3 phase type having IP 66/69 weather proof for outdoor installation made of plastic material of size 255X355X122 mm with opaque cover, conical cable gland aluminium lugs, Protection Class IP 65, 04 Nos aluminium bus bar of size 25x4 mm for three phase and neutral including 01 No MCB SP 6 Amps for controlling street light and 2 Nos MS clamp of size 30x5 mm complete with nuts, bolts and washers for mounting the junction box on street light pole, complete incl taking down old one and all as specified and directed by Engineer-in-Charge.