REPAIR TO PUMP HOUSES, POWER HOUSE, OHT, UG SUMP AND CERTAIN EM INSTALLATION AT MIRAN SAHIB AND BSO YARD AT SATWARI UNDER GE JAMMU

Amount

Demolition of brickwork / stone masonary built in cement mortar including all quoins, arches, pillars, but excluding precast concrete articles complete all as specified and as directed.

Dismantling unframed work timber scantling 40 Sqcm and over in section in any position as in unframed work complete all as specified and as directed.

Dismantling timber scantling in fillets, posts, rafters, purlins etc under 40 sq cm in section complete all as specified and as directed.

Brick work with sub class 'B' old size brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and as directed.

Brick work with sub class 'B' old size brick straight or curved on plan on plan to any radius in half brick thick walls built in cement mortar 1:4 complete and fixed all as specified and as directed.

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 15 mm thick on fair faces mixing with water proofing compound as per manufacturer instruction (Water proofing compound paid for seperately) of brick work or concrete surfaces in CM 1:4 finished fair and even without using extra cement complete all as specified and as directed. . (WPC shall be measured and paid seperetaly under respective item)

Rendering 10 mm thick on faces other than fair of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement cement complete all as specified and as directed..

Rendering 5 mm thick on ceiling or concrete surfaces in CM 1:3 finished even and smooth without using extra cement including and incl taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and three coats of white wash. complete all as specified and as directed.

Preparation of new plastered surface of wall and applying two coats of cement based paint including one coat of alkali resistant primer surface complete all as specified and as directed.

Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of wall putty 1 mm complete all as specified and as directed.

Preparation of old surfaces and applying two coat of cement base paint complete all as specified and directed.

Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down old plaster. complete all as specified and as directed.

Structural steel work as in roof trusses (framed), post, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections or MS tube pipe) including distance pieces, cleats etc Fe-410W (GradeE-250) quality 'A' including shop coat of primer complete all as specified and as directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in gusset plate, base plate etc Fe-410W (grade E-250) complete all as specified and as directed.

Dismantling AC corrugated, semi corrugated sheets in roof covering including ridge complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPs as in roof covering fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPs as in ridge of roof fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and as directed.

Position suspended false celling system using E Grid suspended celling Grid system of M/S Everest industries Ltd or India Gypsum. The size of Grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick High Pressure Stream cured non primered classic/designer variant E-Board ISI Marked IS No 14862-2000. Fibre cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the pulins of the roof with butter fly clips incl Dismentling wall and ceiling boards (fibre pulp/insulation ) any thickness including cover fillets including taking down All electric fittings fixed with ceiling and refixig the same in position after repalcing the ceiling) complete all as specified and as directed.

Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6.

Any coloured non skid jointless ceramic tiles 6 to7 mm thick , area of each tile exc 0.11sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and Shade, Colour shall be decided by Engr in Charge complete all as specified and as directed.

All as per item No 23 but in vertical surfaces including 10 mm thick cement rendering /backing coat of cement in CM 1:4 complete all as specified and as directed.

Coloured glazed ceramic tiles glossy finish of size 450x300x 5-6mm thick in dado’s/skirting etc (1st quality). set and jointed in neat cement slurry and pointed in colored cement to match, pattern, laying etc of tiles and Shade, Colour shall be decided by Engr in Charge including 10 mm thick cement motar CM 1:4 complete all as specified and as directed.

Filling in tiling grooves 4-5mm wide and 10mm deep with epoxy with glitter at top, as per manufacturer's instructions and clean the tile surface with soft sponge complete all as specified and as directed.

16 to 18mm granite (Jet black, Nero Absolute or as appoved by Engr-in-charge) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl taking down old complete all as specified and directed.

Hardcore of gauge of broken bricks n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

Dismantling Stone slabs laid dry and tiles of any description or thickness in floors, aprons etc. and rubbish off the premises complete all as specified and as directed.

Demolition of concrete in ground floor not exceeding 15cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as specified and as directed.

Machine cut kota stone slab flooring 18-20 mm thick over and incl 20 mm thick cement screed bad in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete including dismantling of old stone floor and PCC complete all as specified and as directed.

Providing 75 mm thick plain cement concrete 1:4:8 mix, type D-2 (Using 40mm graded crushed stone aggregate) as sub-base floor complete all as specified and as directed.

Providing, cement concrete Type B1, 1:2:4 (Using 20mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges

Exterior grade full body vitrified tiles matt finished 400 x 400 x 12mm thick set jointed in neat cement slurry and pointed with grey cement and pigments to match the shade of tile pattern as approved in floors incl 15mm thick screed in CM 1:6 complete all as specified and as directed.

75mm thick cement concrete 1:3:6 type C1 using 20mm graded crushed stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete

GI tubing of 15mm bore medium grade including necessary fittings complete including taking down old pipe complete all as specified and as directed.. ISI Marked

All as per srl item No 37 above but 20mm bore

Bib taps, fancy type chromium plated ( long body) with crutch or butterfly handle,screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete fixed in repair all as specified and as directed.

Stop cock, chromium plated fancy type screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete fixed in repair all as specified and as directed.

Chromium plated Pillar taps, with capstan heads, chromium plated, screwed down high pressure,of size 15mm dia bore complete fixed in repair all as specified and as directed

PVC connection 15mm bore and for 600 mm long with brass or PVC nuts and PVC washer complete fixed in repair all as specified and as directed.

PVC waste pipe 32mm bore complete fixed in repair all as specified and as directed.

Chromium plated Tubular towel rail, 20mm dia D type 60cm long between flanges complete fixed in repair all as specified and as directed.

100mm dia steel grating with or without hole complete fixed in repair all as specified and as directed.

Looking mirror with PVC moulded frame and hard board back white colour of size 450x600mm complete fixed in repair all as specified and as directed.

PVC valve less syphon action type low level flushing cistern 8 - 10 liters capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stain less steel with long bend of 32mm dia complete fixed in repair all as specified and as directed..

1000 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 nos GI tank nipple complete fixed in repair all as specified and as directed.

Vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete fixed in repair all as specified and as directed.

Water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest 'P' or 'S' trap front or back intlet incl provision of PCC 1:2:4 type B1,and provn of cement concrete bedding and making good the dismantled surface and connection flush pipe (rate also including for taking off unhygienic old WC)15mm dia PVC Connection 450mm long complete fixed in repair all as specified and as directed.

Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete fixed in repair all as specified and as directed.

Gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipecomplete fixed in repair all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).

75 mm borePVC (SWR) pipes single socketed in any length with rubber ring joints , bends ,Tees complete fixed to walls at any height

110 mm borePVC (SWR) pipes single socketed in any length with rubber ring joints , bends ,Tees complete fixed to walls at any height

PVC (SWR) bends 110 mm radius

110 mm PVS(SWR) Junction single(T) equal /Unequal

PVC (SWR) bends/shoes any radiusof 75 mm dia

PVC (SWR) bends any radius provided with access door of 110mm dia

All as per item No 59 above Above but 75 mm dia

Treatement of cracks found in the core concrete :- (i) Opening of crack by making a ' V' notch/groove of size 12mm x 12mm over the entire length of the crack as identified by the Engr-in-charge. (ii) cleaning ' v' notch/groove of all dust/debris/loose material (iii) Drilling hole of 16mm dia and about 40mm deep along the length of crack @ (300 mm c/c or thickness of structural member whichever is less) Note : In case length of crack is found less than 300 mm then min 2 holes shall be drilled. (iv) Inserting 12 mm dia flexible PVC one way injection nipple in the hole drilled above and fixing the nipple with the help of fast setting epoxy putty. (v) seal the surface around the nipple and the area of crack between successive nipples polymer modified mortar to ensure that there is no leakage from any gap. (vi) Allow the polymer modified mortar to cure for 24 hours and ensure that firmly fixed in postion. (vii) cleaning nipple one by one commencing from the top to bottom in case of column and one by one in alternate direction incase of wall using blow compressed air followed by water injection. An Ensuring that there is no obstruction in free flow of grouting materials complete all as specified and directed.

(viii) Injecting " resin with very low viscosity monomer by mixing resin and hardener in proportions recommended by manufacturer by using injection gun equipped with pressure gauge & valves for controlling of flow of compressed air & resin. Sika Injection -201IN Note : pressure shall be in the range of 1-2 kg/sqm and shall be done in nipples one by one as per order recommended by manufacturer. Mixing of resin and hardener shall be mixed in small quantities so as it is consumed with in 30 minutes. Before use mixer shall be stirred thoroughly. (ix) Allow entire effected surface to cure for 24 hours. (x) cutting out projected parts of the nipple & seal the hole in the nipple with epoxy putty as recommended by manufacturer. (xi) cleaning exposed surface of substrate off any dust /loose material after ageing of the grout as recommended by manufactuer.

Providing PMM (Polymer modified cementitious mortar) :- (i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 15 mm thickness. Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed.

Food grade certified elastomeric waterproofing coating of water retaining structure :- (i) Cleaning existing surfaces of RCC members (Wall/slabs) and making surface free of loose material, oil, grease etc. by vigorous wire brushing including light grit blasting where necessary as recommended by Engr-in-charge. (ii) Further, cleaning using biocide(as recommended by manufacturer) to ensure that surface is free of algae and fungus and no trace of paint (any type) left out. (iii) Cleaned surface to be allowed to dry. (iv) Apply a coat of Solvent free epoxy resin coating for potable water retaining structure at nominal rate of 10Sqm/per ltr @ 100micron thickness after dry or as recommended by manufacturer. (v) Apply a more coat of Solvent free epoxy resin coating for potable water retaining structure at nominal rate of 10Sqm/per ltr (Thickness 100micron in dry state) after 5-6 hours as recommended by manufacturer complete all as specified and directed. Make Fosroc Nitocote EP 405) or Sikagard 67

Erecting and dismantling scaffolding around overhead water reservoirs and complete removal of existing old treatement of concrete/plastered surfaces and applying two coat Undiluted (4-6 hrs gap after first coat) of fibre reinforced elastomeric paint @ 2.60 Ltr/Sqm for two coats over and above a coat of primer of the same 40% diluted @ 1.4ltr/sqm of overhead reserviors new/old plastered surfaces as recommended by manufacturer complete all as specified and directed. Make (Asian Smart care Damp proof or Berger Dampstop elasto)

Preparing painting and writing letters of 'SAVE WATER' over the surfaces of over head tank in colour "Blue" of size 36" x 18" and background over the surface of white painted on dome of RCC over head tank incl writing Tank CAPACITY, Date of cleaning and Due date of cleaning of capital letters of 80mm size of external surfaces of wall in white colour and back ground painted with black paint on the surfaces complete all as specified and as directed.

Preparing surface of old steel material (MS Steel pipes of Over head tanks, MS railing, rugs, MS stairs and other steel surfaces) of any description over 10 cm width or girth treated with one coat of synthetic enamel paint complete all as specified and as directed.

Taking down chowkats or frames (without taking off shutters from the frame) not exceeding 1.50 sqm each and removing from site complete all as specified and as directed.

All as per item No.68 above but n exe 1.5 m each.

Taking down shutters from the frame of any description exe 1sqm but n exc 2 sqm each leaf and removing from site all as specified.

Pressed steel frames of size 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete all as specified and as directed.

Cement concrete (1:3:6) type C0 using 12.5mm graded crushed stone aggregate filling in pressed steel chowkats bed block for holdfast and the like complete all as specified and as directed.

35mm thick 2nd class hard wood panelled shutter plain, framed with panels of timber flat on both sides supplied and fitted to chowkats complete all as specified and as directed.

35 mm thick IInd class hard wood glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.24(a), open rebated and prepared to receive glass or gauge (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and miterd beads for securing glass or gauge etccomplete all as specified and as directed.

Solid PVC door frame of size 50 mmX47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube suppling fixing in opening as per specification & drawing as in door/ kitchen cabinate frame

Factory made solid panel PVC door shutter30 mm thick (style) consisting of framemade out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heatmoulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm widthstuck inside with solvent cement for stilesand plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solventcement, suppling & fixing in the frame atsite as per specification & drawing as in kitchen cabinate/toilet shutter

Galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples. complete all as specified and as directed.

All as per item No. 31 above but fixed in repairs.

300 mm long aluminium anodised sliding dor bolt with hasp staple(bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding door bolt of extruded section

Aluminium anodised barrel tower bolts 150 mm size, and fixed all as specified

Aluminium anodised barrel tower bolts 200 mm size, and fixed all as specified

150 mm aluminium handle cast type complete all as specified

Floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor

Repairs mild steel butt hinges 100 mm medium weight cold rolled

Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixed/welded to door frame complete all as specified and as directed.

Preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and as directed.

Powder coated aluminium three track sliding type glazed window,shutter with 5mm thick plain sheet glass fixed open track section 100x38mmx1.2mm having three track (two of glass & one of stainless steel wire cloth of 0.36mm nomina dia of wire and average width of aperature 2mm) with members of window shutters of section 38x12mm including,wire gauge and grill shall be fixed with the help of 40 mm aluminium flat and other standard Bombay sliding section incl all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips,rubber packing, Aluminium snap beeding etc complete fixed in repair all as specified and as directed.

Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,complete fixed in repair all as specified and as directed.

Powder Coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete fixed in repair all as specified and as directed.

Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete fixed in repair all as specified and as directed.

Double action floor door spring hydraulically regulated made up of min 1.25mm thick aluminium alloy sheet foundation box, main body with stainles steel cover governing pivot made of brass, heavy duty wt capacity upto 100kg fixed to door complete all as specified and directed.

5.5mm thick frosted/tinted glass ordinary quality and glazing with oil putty / beads in squares exe 0.5 sqm each pane complete all as specified and as directed.

3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares n exe 0.5 sqm each pane complete all as specified and as directed.

Box type steel windows/Ventilator (factory made) outer frame made out ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mmX35mmX20mm openable (double shutter) with glazed shutter on extrernal side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 nos on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler /AC window complete all as specified and shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3 Note:- The quoted rate a shall also include (i). One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrte surface (ii) 4 nos MS steel lugs made of 20X5 mm Iron flat 200 mm long iii)10 mm Sq Bar grill/guard bar design as per drawing (iv) PCC block for embedding lugs (v) Two coat of synthetic enamel paint. (vi) Galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples.complete fixed in repair all as specified and as directed.

18mm thick single layered HDHMR coloured / textured finish board one side and other side white balance, density more than 850 Kg / cum smooth finished fixed in cupboard and jointed together with necessary adhesive complete all as per directions by Engineer-in-Charge, manufacturer’s specification complete fixed in repair all as specified and as directed.

Modular auto concealed soft closed hinges 35mm, 110 degree size fixed to cupboard complete all as specified and as directed.

304 Grade stainless steel handle 150mm fixed to cupboard complete all as spcired and as directed.

Magnet catcher 50 mm size for kitchen cupboard shutter complete all as specified and directed

Provision of roof treatment with polymeric water proofing membrane all as given below :- (a) Taking down existing water proofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) plastering 10mm thick in CM 1:3 using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engr-in-Charge. (c) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (e) cement concrete tiles 25 cm x 25 cm x 20-22mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors/terraces over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brickwork, masonary etc and making good disturbed ground complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed.

Excavation in post holes in soft/loose soil n.exc 0.5cum and getting out returning filling in and ramming earth or broken rubbles mixed with earth around in layers n.exc 25cm complete all as specified and directed.

Angle iron and flat iron as in fencing posts, struts, fillets etc including cutting to shape as required, drilling holes, notching for wires, splitting ends etc conforming to Fe 290 Gde E-165 complete all as specified and directed.

Mild steel screw bolts (machine made) with hexa gonal or square heads at one end 12mm dia of neck exc 5cm and n exc 10 cm long bolt with washer and nuts complete all as specified and directed.

3mm dia GI wire chain link fencing and line wire 75x75mm mesh size and any type of strand rails straining bolts etc including provision of binding wire complete all as specified and directed.

Fixing only of Chain link fencing including line wires, any mesh, size and type to any type of standards, rails,straining bolts, etc.including provission of binding wire complete all as specified and directed.

PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Preparation of new steel surfaces of any description exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches,sockets, ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Taking down carefully unserviceable DBs, of any type/size with MCBs and disconnecting and making good disturbed surfaces complete all as directed.

Repair for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 6.0 Sqrmm for earth wire unsheathed , multistranded , copper conductor FRLS, drawn through the New rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length incl taking down old wiring. Note : Wiring shall be done in proper colour coding.

Point wiring for one light / fan / call bell point controlled by one 5 Amp switch with 1.5 Sqmm single two core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into new concealed PVC rigid / steel conduit and into New CI / pressed steel sunken / terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed.

All as per item No 113 above but for multi 5 pin 5 amp socket outlet on same board ISI marked complete all as specified and directed.

All as per item No 113 above but for multi 5 pin socket outlet 5 amp socket on independent board ISI marked complete all as specified and directed.

All as per item No 113 above but for multi 6 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper conductor multistrand cable pvc insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsheathed copper conductor multistranded cable 2.5 sqmm as earth wire FRLS pvc insulated in green color complete all as specified and as directed.

LED lights fitting 1x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.9, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete fixed in repair all as specified and as directed.

LED light fitting 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete fixed in repair all as specified and as directed.

Fan step regulator, 100W - 1 module 240 volts ISI marked complete all as specified and directed.

Distribution board, double door, made of 2mm thick stainless steel sheet, powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Distribution board, double door, made of 2mm thick stainless steel sheet, powder coated for MCB with copper bus bar and neutral link earthing stud SPN 6 way 240 volts double door complete all as specified and as directed.

240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete fixed in repair all as specified and as directed.

LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete fixed in repair all as specified and as directed.

Exhaust fan, steel body AC single Phase 230V of size 450 mm sweep with blades, frame and louvers inculding making holes on existing wall/plastic/iron shed for 450 mm dia Exhaust fan. Plastering/Painting for making good to the original surfaces of any description complete fixed in repair all as specified and as directed including remove of old fans to MES store yard.

Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) .complete fixed in repair all as specified and as directed including remove of old fans to MES store yard.

Switch piano, flush type single pole one way 5 Amp, 240 volts complete all as specified and as directed.

Socket outlet 2 in 1, 3 pin, 5 A complete all as specified and as directed.

Switch socket outlet combined 2 in 1, 3 pin 5 amp and 15 amp flush type, 240 Volts complete all as specified and as directed.

Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Ceiling rose, 3 Pin/PVC/polycarbonate isolated body ISI marked complete all as specified and directed

Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

GANDOTRA CONSTRUCTION CO (BID ID -3390227)

M/S MANJIT SINGH AND SONS (BID ID -3382728)

Sarbat Construction Co (BID ID -3389392)