DOOR TO DOOR MAINT AND REPAIRS TO ROOF, JOINERY AND LEAKAGE /SEEPAGE AND MISC WORK AT OTM AND MD ACCN AND CLEANING OF SEWAGE LINE, MANHOLE, AND REPAIR TO DRAIN, FOOTPATH, HARDSTANDING AND CIV MISC WKS AT NSD SEWRI AND TS MAHUL UNDER GE (NW) MANKHURD

Amount

Excavation in trenches, not exceeding 1.5m wide/ 10 sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil.

All as per item No 01 above but depth exc 1.5 Mtr but n.exc 3.00

All as per item No 01 above but in soft disintegrated rock

Returning, filling in including spreading, leveling watering and well ramming in layers n.exc 25cm in soil complete all as specified and directed by Engr-in-Charge..

Removing excavated soil/ rock to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

M & L for plain cement concrete 1:3:6 type C2 (using 40mm graded agg) as in bed to drain pipe, 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested including necessary shuttering and supports to concrete

All as per item No 04 above but for 200mm bore pipe

M&L plain cement concrete type C-1 1:3:6 (using 20mm graded stone aggregates) as in plinth protections 75 mm thick finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3. m c/c filled with mastic mortar

M & L for 150mm internal dia salt glazed stone-ware drain pipe Grade'A' laid in trenches and jointed complete all as specified and directed.

All as per item No 06 above but reinforced concrete pipe class NP2 laid and jointed complete with collars 200 mm dia

Demolition of drain pipe 150 mm/200 mm SWR pipe complete with all joints and accessories complete all as specified.

Demolition of drain pipe 75 mm/100 mm CI or PVC pipe complete with all joints and accessories complete all as specified.

S & F of 75 mm bore uPVC (SWR) soil, waste, ventilating rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc, including taking down existing SWR pipes(including fittings) of any description, complete all as specified and directed.

S & F 110 mm bore uPVC (SWR) soil, waste, ventilating, rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc, including taking down existing SWR pipes(including fittings) of any description, complete all as specified and directed.

S&F 75mm bore uPVC (SWR) branch piece single (Single Y), equal or unequal with and including rubber ring joints, complete all as specified and directed.

S&F 110mm bore uPVC (SWR) branch piece, single (single Y), equal or unequal with and including rubber ring joints, complete all as specified and directed.

S&F 75 mm bore uPVC (SWR) Bends with and including oval access door and also including rubber ring joints, complete all as specified and directed.

S&F 110 mm bore uPVC (SWR) Bends with and including oval access door and also including rubber ring joints, complete all as specified and directed.

Labour for cleaning /clearing of blokage of WC /EWC ,urinal , bath or kitchen trap ,gully traps , floor traps , vertical and horizontal soils /waste pipe of differrent dia and sewage lines (PVC/SGW/CI/RCC of any dia) and including opening inspection eye door of bend/ branch pieces, rodding till smooth flow and refixing of door after cleaning and and any othe cleaning work such as cleaning of manholes upto 1.50 m depth all as directed by Engr in Charge in the area of the T S Mahul & NSD Sewri & BCF Sewri under GE (NW) Mankhurd. Note : (a) Contractor's labourer will report daily at 0845 hrs on all working days (except Sunday & Govt holidays) at B&R Sewri office and attend the complaints as directed by Engr in Charge. Complaints will be cleared within 24 hours after receiving the complaints.The contractor will employ requisite labour and supply all T&P (mechanical iron rods, ,knot ropes , bamboo , gloves , masks safety belts , cell torch etc ) and any other materials required to clear the blokages at the site without any extra cost . In case any labour does not report to Engr in Charge for the whole day or found missing more than half an hour on any day , Penal recovery @ Rs 860/- per head per day shall be made proportionally from contractor's dues. b) The above item includes conveyance cost of labour with their tools to travel from one area / location to other area location to attend complaints , plugging of sewer and diverting flow of sewage if necessary to carry out the work and removal of sludge from the site to outside MOD land( The department shall not be liable to provided any kind / form of transportation to the Labour). c) Registers of labour attendance and complaints shall be maintained by contractor at their own cost , which shall be kept in custody of MES department (complaint cell) duly signed by contractor's reprentative , JE Civl and Engr in charge.

Cleaning of septic tanks upto the bottom , including pumping out liquid sludge/waste materials ,taking out solid mateirals from the bottom and digging a suitable sized pit nearby filling the spoil, subsequently covering it with soil and treating the top with bleaching powder complete.

M & L for precast reinforced cement concrete 1:2:4 type B-1(20mm graded agg) as in cover slab for manholes/drainage etc, set in cm 1:4 including necessary form work all as specified and directed including demolition of old manhole cover. (Note :- Reinforcement shall be measured and paid separately).

S&F mild steel TMT deformed or twisted bars 6 to 8 mm dia , cut to length , bent to shape required including mild steel wire (annealed ) not less than 0.9mm dia complete all as specified and directed.

Supply only integral water proofing compound

M&L for 75 mm thick PVC(SWR) Floor trap with grating including jointing to waste pipe fixed with PCC 1:2:4 type B-1 in repairs complete all specified and directed.

Dismantling stone slab and tiles of any description or thickness in floors/ dado laid, bedded and pointed in any mortar.

M&L for coloured Glazed ceramic tiles (300 x 200 mm) x 7 mm thick, in vertical surfaces such as skiriting, dados etc set jointed in neat cement slurry and pointed in matching colour cement paste over and including 10 mm thick backing coat in CM 1:6

M&L for coloured non skid ceramic tiles 300 x 300mm x 6 to 7mm thick as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete over and including 20 mm thick screed bed in CM 1:6

Removal of plant growth from wall/roof projection or along the soil /rain water down pipe at any level by injection with chemical Glyphospate solution (4% concentration) of 20mm or till refuse by cutting or injection in stem of plants or roots at 30mm including scafolding upto any ht.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level)

M & L for hardcore with broken stone or boulders of gauge n exc.63mm, deposited, spread & levelled in layers n exc 15cm thick, watered & rammed to a true surface

M&L for PCC 1:3:6 type C2 (40mm graded aggregate)75mm thick as in sub base.

M&L for coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed in neat cement slurry and pointed with grey cement and pigments in floors including 20mm thick sreed bed in CM 1:6

Dismantling wrought iron or mild steel work of any description not otherwise provided

S&F in repairs galvanised , 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail, staining bolts incl, securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc (each line wire to be measured) all as specifed and directed

S&F M.S post and struts in fencing incl, cutting tops to shape as directed drilling holes notching for wire etc flat iron fillet for securing wire mesh etc incuding all necessary drilling, bolting or rivetting etc conforming to Fe-290, Gde E-165 complete as specified.

M&L for preparing of new steel surfaces of applying any description over 10 cm width or girth and two coat of synthetic enamel paint over one coat of red oxide primer.

S&F in repairs barbed razor type concertina coil hot galvanised spring tensile wire fixed on existing 'Y' shape angle post and barbed wire over compound wall, coil of 8 to 10 RM per coil of 610mm dia, minimum weight of coil shall be 13.25kg/coil etc all as specified

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc.

M&L for PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in surface channels and drains all as specified

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc.

M & L for brick work with subclass 'B' bricks straight or curved on plan exceeding 6mm mean radius built in CM 1:4 complete all as specified.

M & L for walling of random rubble masonary, uncoursed, well bonded, bedded and solidly hearted built in cm1:4 all as specified.

All as per item No 45 above but except stone.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from straight edge 20mm and dressing of face beds and joints as specified of RR mansonary uncoursed/brought to course in trap stone.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement

M&L for raised pointing to random or polygonal rubble,uncoursed or bought upto course in cement mortar 1:4 all as specified

M & L for cement concrete 1:2:4 , type B-1 (using 20mm graded stone aggregate) as in coping including necessary form work.

S/F in repair Vitreous China wash basin, white, flat back, size 550x400mm but including brackets, coupling and waste pipe complete

S&F in repairs, white, vitreous China, wash down water closet pan (pedestal pattern), Ist quality, inlcuding plastic water closet seat white, closed pattern with flat bottom and cover and Mild Steel CP or aluminised hinging device, complete all as specified and directed. Note: Flushing cistern, flush pipe will be measured and paid for separately.

M&L health faucet of 15 mm dia with 1 m tube hook , fixed in repairs ,Cat No 187 of Prayag or equivalent make as approved by the GE complete all as speicified

S&F fixed in repairs two way Bib cock of make of ESSCO or equivalent of Marko ,Parko as approved by the GE complete all as specified and directed.

S & F in repairs flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type with dual flushing system, low level,white with inlet, ball valve,float and handle including brackets, flush pipe of polyethylene of low or high density or PVC, 32mm dia, complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

M&L 40 mm dia Low density polyethylene (LDPE) pipes of pressure rating 6kgf/sq. cm all as specified and directed.

S&F 15mm bore brass CP pillar tap, Make ESSCO Cat No MQT-507 or equivalent of make Parko as approved by the GE, complete all as specified and directed.

S&F 15mm bore brass CP Stop Valve, Make ESSCO Cat No MQT-513 A or equivalent of make Parko/ ZOLOTO as approved by the GE, complete all as specified and directed.

Taking up or down steel water tubing and connections of size 15mm bore, complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified, complete all as specified and as directed.

M&L Loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells

M&L Sand filling under floors or in foundation including watering and consolidation

M & L for preparation of old painted steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description and applying one coat of aluminium paint complete all as specified and directed.

S&F mild steel safety lever locks with four levers for rolling shutters complete all as specified and directed

S&F mild steel plain black sheet 1.00mm thick in hearths covering to door shutter etc with plain 40mm lap joint or welded/ riveted seams including bending, turning up, mitred angle stopped end, outlets sheet welded to frame etc complete all as specified and directed.

Taking down shutters of any description not exc 1.00 Sqm each

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each

Taking down chowkats or frames with shutters not exc 1.50 Sqm each (without taking off shutters from the frames).

Taking down chowkats or frames with shutters exc 1.50 Sqm but n exc 4.00 sqm each (without taking off shutters from the frames).

M&L IInd class plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L factory made IInd class hard wood glazed and skeletion shutter 30mm thick, open rebated divided into square with plain, chamfered or rounded, mitred and rebated sash bars and prepared to receive glass, gauze, etc , sizes of members of shutters as specified in SSR part-I, section 8, clause 8.24(b); supplied and fitted to old or new chowkats complete all as specfied and directed.

S&F factory made IInd class hard wood plain framed, panelled shutter 35 mm thick (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed 100 mm

S&Faluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixedd nuts, four on bolt plate and two on staple plate and fixed,250mm complete.

S&Fbutt hinges, medium weight cold rolled mild steel, size 100mm

S&Fbutt hinges, medium weight cold rolled mild steel, size 75mm

S&F extruded aluminium alloy handles, fabricated type., anodised,150 mm

S&F extruded aluminium alloy handles, fabricated type., anodised,100 mm

Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples,fixed in repair

Supply and fixing 4 mm thick plain sheet glass, ordinary quality with and including provision of beading for joinery complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Dismantling of wrought iron of mild steel work of any description not otherwise poivided including embedded foundation concrete if there of any type

Excavating in post holes (or similar holes) each n exc 0.5 cum in any type of soil , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,

S&F M.S post and struts in fencing, joist, channel, angle or tee for posts,truss, support for sheeting , ladder , sheet ets cutting tops to shape as directed drilling holes notching for wire etc including bolts complete as specified. At any height including necessary scaffolding and safety arrangements

M&L for preparing of new steel surfaces of applying two coat of sythetic enemul paint over one coat of red oxide any description ,over 10cm in width or girth not otherwise described

Supply only PVC coated (1 mm thick PVC Coating and GI Wire as specified ) chain link fencing exceeding 2 Kg but not exceeding 3 Kg per Sqm with size of mesh 50 x 50 mm and thickness of wire not exceeding 2.83 mm complete all as specified and as directed by Engineer-in-Charge.

Fixing only PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires, complete all as specified and as directed by Engineer-in-Charge.

M&L MS round bars 10 mm dia & over, cut to length, bent to shape as required for handles and rungs and painted with two coats of Synthetic enamel paint etc complete all as specified and directed.

M&L for PCC type B2 1:2:4 (40mm graded aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and directed.

Providing, cement concrete 1:2:4 (20mm graded aggregate) in bed blocks, lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work

S&F in repairs for Medium Blade Profile Concertina Coil 600mm dia (5 Spiral Per Running Metre) Made from 2.5mm dia High tensile spring galvanised steel wire of tensile 1500 Mpa with razor shaped barbes of 0.5mm galvanised steel wire of 22mm length and 16mm width out to out and 35mm spacing centre to centre fixed completely approximately weighing 1.42 Kg/mtr with compelte all as directed and specified

S&F in repairs galvanised ,2 srand steel barbed wire 2.24mm dia barbed with 2mm dia barsbs n exc 150mm spacing and staining rail staining bolts incl, securing or tying at crossing with and provision of galvanised mild steeled wire staples or steel pins etc as directed (each line wire to be measured) all as specifed and directed

M & L in repairs for 18/19 mm plywood grade BWR type BB fixed with screws to timber frame work

M & L in repairs 2nd class hardwood Plain fillets, square, rectangular or triangular in section, clean sawn, secured with mills or brads, of sectional area exc 13 sqcm but n exc 25 sqcm

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two coats

Dismantling completely existing roofing membrane including loosened cement plaster and exposing the top surface of RCC slab and making good the same in CM 1:4 and removing rubbish, etc to a distance exceeding 500m and not exceeding 1.0km complete all as specified and directed by the Engineer-in-charge

M & L for 10mm thick plaster in cement and sand mortar (1:4) finished even and smooth without using extra cement mixed with WPC over roof surfaces, complete all as specified and directed, Note: WPC shall be measured and paid separately as supply only

M & L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications, complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption - Not more than 1% on mass within 24 hours. (ix) Cold flexibility - Minimum (-) 20C. (x) Dimentional stability % change = Maximum 1%.

M&L for applying one coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm over APP membrane for non accessible roof, complete all as specified and directed.

Dismantaling Plain or corrugated sheeting of any type, material and of any gauge, thickness, including Nainital or similar pattern roof covering

S & F 6mm thick asbestos cement corrugated or semi-corrugated sheets in roofs at any position fixed with L-type or J-type or cranked hook bolts in patches at an maximum height of 10 m complete all as specified and directed

S&F Asbestos cement onepiece plain angular ridge 6mm thick in patches at any position fixed with L-type or J-type or cranked hook bolts in patches at an maximum height of 10 m complete all as specified and directed

Petty repairs to wooden joinery / PVC doors/aluminium windows works such as Resecuring or easing and adjusting of doors, windows kitchen cabinets in any size, refixing hinges etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works assigned by the Engineer In charge. (Note : Replacement of builders hardware if required shall be measured and paid separately under relevant item) Note item No 1 and 2 : (a) Rep of contractor will collect details of complint from departmant. The contractor will be alloted complaint on daily basis and sufficient resources will be deployed by him/her for completion of day to day comaplaint within 24 Hrs from the time of reporting. Any delay beyond above mentioned time limit suitable penalties as mentioned in relavant clause of Contract. (b) A detailed log of complaints with completion/ non-completion remarks from users/MES will be maintained by the contractor and same will be updated on daily basis in consulatation with Engr-in-Charge or JE detailed by him. (c) The contractor will make suitable arrangment for emergent complaints and will notify auth rep/Engr-in-Charge about extraordinary circumstances for probable non-completion or delay in rectification of complaints beyond state time limit set for disposal of complaint. In case of any dispute the decision of accepting officer will be final and binding in this regard. (d) The quoted rated deems to be inclusive of transportation and other expenses required for the resource deployment at the complaint site around scattered Naval Depo. (e) The contractor will maintain suitable inventories and range of spares required to meet the complaints as same will be reviewed peridically by Engr-in-charge to streamline complaints disposal system.

Petty repairs to plumbing/internal water supply works such as repair to leaking bib taps, pillar taps, mixers stop cocks by tightening and providing spindle,washer repairs to float valves, low leveled cistern to the satisfaction of user as assigned by the Engineer In Charge.

Suply only stainless steel butt hinges, 100mm, medium weight complete all as specified and directed

Supply only stainless steel butt hinges, 75mm, medium weight complete all as specified and directed

Supply only stainless steel butt hinges, 50mm, medium weight complete all as specified and directed

Supply only aluminium, anodised, barrel tower bolts of extruded section of size 200mm complete all as specified and directed.

Supply only aluminium, anodised, barrel tower bolts of extruded section of size 150mm complete all as specified and directed.

Supply only aluminium, anodised, barrel tower bolts of extruded section of size 100mm complete all as specified and directed.

Supply only extruded aluminium alloy handles, fabricated type of size 100mm in any position complete all as specified and directed.

Supply only extruded aluminium alloy handles, fabricated type of size 150mm in any position complete all as specified and directed.

Supply only floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring of length 140mm fixed in floor etc complete all as specified and directed.

Supply only stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with in wooden windows, doors etc and including M&L for fixing of teak wooden beading of suitable size all around complete all as specified and as directed by the Engineer-in-Charge.

Supply only for aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded section of size 300 mm fixed at any position all as specified and directed.

Supply only 4 levers aluminium Mortice lock size 100 mm

Supply only aluminium (Die cast body) hydraulically Door closer regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg all as specified and directed.

Supply only anodised aluminium alloy curtain rods with fixing brackets, stops, rollers etc all as specified.

Supply only10 ltr, PVC, valveless, syphonic action type, flushing cistern, low level/ high level including inlet, ball valve, float and handle including brackets with and including PVC flush pipe 32 mm bore, of suitable length as per site requirement connecting to WC etc, complete all as specified and directed.

Supply only CP stop cock 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed.

Supply only CP pillar taps 15mm bore, cast copper alloy, chromium plated fancy type complete all as specified and directed.

Supply only waste fitting of 32 mm bore brass, chromium plated for glazed ware wash basin etc complete all as specified and directed.

Supply only waste fitting of 40 mm bore brass , chromium plated for glazed ware for sink coulpling etc complete all as specified and directed.

Supply only waste pipe for WHB 32mm bore fixed to wash hand basin coupling length pipe 0.90 mtrs each complete all as specified and directed.

Supply only waste pipe for kitchen sink 40mm bore fixed to sinks coupling length pipe 0.90 mtrs each complete all as specified and directed.

Supply only stainless steel grating in round shape 100mm dia complete all as specified and directed.

Supply only stainless steel grating in round shape 100mm dia with one hole for waste pipe complete all as specified and directed.

Supply only plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and directed..

Supply only low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls or laid in floors etc.

Supply only chromium plated shower roses 125mm size with or without swivel joint including fixing to steel pipe or union etc.complete all as specified and directed.

Supply only soap dish complete all as specified and directed.

Supply only Health faucet with 1 mtr tube & hook complete all as specified and directed.

Supply only two way Bib cock long body with wall flange fitted by 15mm bore complete all as specified and as directed

S&F aluminum anodised grill DG- 104 of Deco grill or equivalent fixed with 'F'/'U' section approved make all as specified and directed. Note : (i) Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE. (ii) Minimum thickness of anodizing shall be 15 microns.

M & L for rendering 10mm thick using polymer modified ready mix cement based plaster on the wall surfaces including finishing the surface of top layer even and smooth complete all as specified and directed make: easyplast from wall plast/readiplast from ultratech Note: The thickness of plaster specified above is minimum thickness and the quoted rates shall also deemd to be include for the provosion of dubbing of the surface and nothing extra shall be payable on this account. The rate also includes the rate of scaffolding and necessary safety measurements

M&L for preparation of new plastered surfaces on walls, preparation for distempering and applying two coat of oilbound distemper over a coat of primer including stopping of nails holes,cracks etc and 1 mm thick (minimum) white cement based wall care putty on old surfaces of walls etc, finished even and smooth, complete all as specified and directed.

Supply only 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Supply only Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

Supply only 4.8mm thick Sheet glass, ordinary quality

Supply only 3mm thick pinhead type glass Note : A sum of Rs 44,070.00 towards sch of credit shall be deducted to arrive the contract sum.

mp construction co

PRIME ENGINEERS

GAJANAN SALES CORPORATION

M/S KHUSHI ENTERPRISES

AM ENTERPRISES

Parmatma Enterprises