SPECIAL REPAIRS TO BUILDING NO. T-1 L BLOCK AT HQ DBA OFFR MESS AND BUILDING NO. XV AT 65 ASC SUP DEPOT JCOS MESS AND CERTAIN OTHER SANCTIONED WORKS UNDER GE CHENNAI

Amount

Surface dressing n. exc. 15cm deep and getting out in soft/ loose soil all as specified and directed.

Excavation in trenches in soft/ loose soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, laying underground cables or for shafts, wells, cesspits, manholes, etc., n. exc. 10 sqm on plan getting out complete all as specified and directed.

M&L sand filling under floors or in foundation including watering, well ramming & consolidating in layers not exceeding 25cm thick complete all as specified and directed.

Returning filling in including spreading, leveling, watering & well ramming in layers not exceeding 25cm thick in soft/ loose soil complete all as specified and directed.

Removing excavated soil to a distance n. exc. 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n. exc. 63mm, deposited, spread and leveled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for providing PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling mass concrete, sub base of floors etc. complete all as specified and directed.

M&L for providing RCC M-30 (Design mix) using graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for providing RCC M-30 (Design mix) using graded stone aggregate as in columns, pillars, piers, posts and struts etc., complete all as specified and as directed.

M&L for providing RCC M-30 (Design mix) using graded stone aggregate as in roof beams complete all as specified and as directed.

M&L for providing RCC M-30 (Design mix) using graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, deck slabs and the like all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4) complete all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan to any radius in half brick thick walls in cement mortar (1:4) complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter of flat rough finished surfaces of concrete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete square, rectangular or polygonal complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam hunching, girders, bressummers, lintels, cantilevers, including supports, overhangs, etc. also splays between floors and beams complete of flat rough finished surfaces of concrete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work, not exc. 200mm thick (Horizontal or sloping) for fair finished surfaces of concrete flat complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, breaks in floors, window cills, concrete railing and openings in concrete wall; floors and roofs and similar works exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but n. exc. 4sqm each along with fittings including separating guard bars/ grills/ wire mesh etc., complete all as specified and directed.

Taking down shutters of any description exc. 2 Sqm each including all fittings complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each and resecuring in the same opening after changing necessary fittings all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought, framed, rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 2nd class hardwood plain framed panelled shutters 35mm thick, (any No of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS: 1003 (Part-I), kiln seasoned & chemically treated and fitted to chowkats complete all as specified and directed.

S&F 2nd class hardwood glazed and skeleton door shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.24 (a) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.

S&F 2nd class hardwood glazed and skeleton window/ ventilator shutters 30mm thick divided into squares open rebated and prepared to receive glass, gauge etc. edges of framing plain, chamfered, rounded fitted with cut and mitered beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.24 (b) supplied and fitted to chowkats with plain, chamfered or rounded mitered and rebated sash bars any numbers, complete all as specified and directed.

M&L second class hardwood plain fillets of sectional area exc. 13sqcm but n. exc. 25sqcm; square, rectangular or triangular in section clean sawn and securing with screws or nails complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube all as per relevant details given in SSR against item No. 08095 of SSR (Part-II) and fitted to chowkats complete all as specified and as directed.

S&F factory made wood free EPS solid PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet Polyurethane painted on the front face and 2mm prelam colour PVC sheet on back face fixed to frame complete all as specified, directed and shown in sketch relevant to item No. 8103 in SSR (Part-II).

S&F SS butt hinges, medium weight cold rolled 75mm size all as specified and as directed.

S&F SS butt hinges, medium weight cold rolled 100mm size all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 200mm long all as specified and as directed.

S&F extruded aluminium alloy handles cast type anodised 125mm size all as specified and directed.

S&F extruded aluminium alloy handles cast type anodised 150mm size all as specified and directed.

S&F aluminium alloy anodised sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F aluminium powder coated designer curtain rods (draw berms rods) 19mm dia exterior grade, 3mm thick with holding clamps and fixed to wall with PVC rawl plug and brass screws and one pair designer end brackets on each opening including taking down the existing curtain rod of any description complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolts; 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples complete all as specified and directed.

S&F aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed to wood/ steel frames with aluminium wire staples including taking out of old unserviceable wire mesh beading etc. complete all as specified and directed.

M&L MS work in bands, straps, supports of stays, sunshade brackets, hook and pintle hinges, clamps, hold fasts, guard bars, grills, bolts and similar items conforming to FE-290, Gde E 165, complete all as specified and directed.

S&F expanded metal weighing n. exc. 4 kg per square metre, cut to length, bent to shape required and typing with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed to wood or steel members complete all as specified and directed.

M&L for mild steel TMT bars in reinforcement, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and as directed.

M&L mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

S&F powder coated aluminium ventilators having thickness of powder coating not less than 50 micron and colour as approved by GE using aluminium section weighing not less than 0.62 Kg per RM for frame louvers aluminium anodized snap beads, screws and fixed alongwith with 4mm thick frosted/ pin headed glass fixed with glazing clips and one for wire mesh shutter fixed on frame etc. including provision of builders hard ware such as wire mesh, stainless steel hinges, aluminium handles, locking arrangements etc. complete all as specified and directed

S&F powder coated (minimum thickness of powder coating 50 micron) anodized aluminium frame for doors, windows, partitions, ventilators etc. with one or more rebates including joining cleats for fixing complete all as specified and directed.

Complete removal of existing roof treatment of any type including demolition of cement concrete padding on roof all as specified and directed.

M&L providing Gypsum board false ceiling using 9mm thick Gypsum board tiles of size 60cm x 60cm with aluminium laminate finish on one side and vinyl laminate finish on other side, fixed with screw on galvanised iron snap grid frame work using 'T' and angle sections made out of 0.5mm thick PGI sheet, class V bent to shape required as in main member, secondary members, perimeter angle section including provision of GI wire suspender of size not less than 4mm dia fixed to roof members @ 1200mm c/c both ways complete all as specified and directed. Note: The unit rate quoted shall be deemed to include the cost of taking down and re-fixing of the electrical fittings such as ceiling fan, light fittings etc. and safe custody of same till re-fixing complete.

M&L for cleaning the top surfaces of roof with wire brush and washing with hydrochloric acid to remove dust, oil, grease, loose particles etc and provide water proofing treatment with membrane type water proofing method using APP modified prefabricated five layer water proofing membrane matt finish 3mm thick and weighing not less than 3.6 Kg/ Sqm reinforced with non woven polyester matt black finished over one coat of bitumen primer at 0.40 ltr/sqm and torch application of membrane using gas burner with 100mm overlap as per manufacturer's instructions with top most layer of surface finished with two coats of solar reflective aluminium paint @ 0.10 ltr/ sqm per coat etc. including 10mm thick rendering in cement mortar (1:4) mixed with and including WPC over 30mm thick (average thickness) PCC (1:2:4) type B-0 using graded stone aggregate mixed with WPC @ 200ml per bag of cement as in padding including carrying out ponding test complete all as specified and directed.

S&F pre-laminated particle board 9mm thick, interior grade pre-laminated on one side with decorative choice lamination and other side balancing white lamination fixed with snap beads/ screws to aluminium frame work as in panel inserts complete all as specified and directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing the debris outside MD land and rubbish off the premises complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-1 using 20mm stone graded aggregate as in plinth protection including filling of joints by bitumen and sand in ratio (1:2) complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.18 Sqm but not exc. 0.38 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.11 Sqm but n. exc. 0.18 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L non skid ceramic coloured tile 7 to 8mm thick concept tiles of design/ pattern as approved (Sqaure or rectangular) area of each tiles exc. 0.06 Sqm but n. exc. 0.11 Sqm in floors laid over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

All as per Item No. 55.00 above but on vertical surfaces such as skirting, dados and risers as in steps etc. laid over and including 10mm thick rendering in cement mortar (1:3) complete.

S&F coloured glazed ceramic tiles as in vertical surfaces of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rendering in cement mortar (1:3) complete all as specified and directed.

M&L for chequered cement concrete coloured tiles of size 40cm x 40cm x 25mm thick with grey cement and no pigment set, jointed and pointed in neat cement slurry as in floors laid over and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for double charged coloured vitrified ceramic tiles 8 to 10mm thick (Square/ Rectangle) area of each tiles n. exc. 0.36 sqm in floors etc.; set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

All as per Item No. 59.00 above but on vertical surfaces such as skirting, dados and risers as in steps etc. laid over and including 10mm thick rendering in cement mortar (1:3) complete.

M&L 75mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth protection/ foot path etc. finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 18-20mm thick machine cut granite slab (of any type), laid over and including 20mm thick cement screed in cement mortar (1:6), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone as in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement and marble dust with admixture of pigment to match the shade of granite complete all as specified and directed.

M&L for rounding to edges of stone slabs, such as in steps, cooking platform and other similar situations all a specified and directed.

Taking down cement plaster on brick work or stone walls etc including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and directed.

M&L 20mm thick rendering in cement mortar (1:4) mixed with and including PIDI PROOF LW compound @ 200ml per bag and finishing the surface fair and even complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with and including PIDI PROOF LW compound @ 200ml per bag and finishing the surface fair and even complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar (1:3) on concrete surfaces as in ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls including brooming down or by steel wire brushing, scrapping down smoke soot, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of ceiling including brooming down or by steel wire brushing, scrapping down smoke soot, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for applying three coats of white wash on ceilings including preparation of newly plastered surfaces complete all as specified and as directed.

M&L for applying three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over including application of 2 to 3mm thick wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior acrylic emulsion paint (Apex Ultima of Asian or Weather coat of Berger or equivalent of other specified makes) over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces and applying two coats of plastic emulsion paint of (Royale emulsion of Asian) over a coat of white primer and 2 to 3mm thick wall care putty complete all as specified and directed.

M&L for preparation of old treated surface and applying two coats of plastic emulsion paint of (Royale emulsion of Asian) over a coat of white primer and 2 to 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment with electric operated blades, washing, rubbing down and stopping of distempered surfaces and applying two coats of distemper oil emulsion over and including a coat of alkali-resistant priming paint complete all as specified and directed.

M&L for complete removal of existing treatment with electric operated blade, washing with water and bleaching powder solution on external surface of walls and applying two coats of Weather Proof Exterior Acrylic Emulsion paint (Apex of Asian or equivalent of other specified makes) over a coat of white primer complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty wooden beads as directed in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F 12mm thick toughened glass as in fixed partition including necessary fixing arrangement at bottom complete all as specified and directed.

S&F 12mm thick toughened glass door including necessary door spring, 02 No. 400mm long stainless steel matt finished handles, suitable locking arrangement fixed with top & bottom pivot with stainless steel fixing plate etc. including taking down existing shutter complete all as specified and directed. Note: The unit rate shall be deemed to include all necessary builder's hardware complete.

M&L preparation of new wooden surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on steel surfaces of any description over 10cm width or girth including preparation of old painted surfaces complete all as specified and directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of aluminium paint over one coat of aluminium red oxide primer complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550mm x 400mm including angle iron brackets and 32mm dia PVC waste coupling with waste pipe fixed in repairs complete all as specified and directed.

S&F vitreous china wash basin Cascade NXT C0431 of size 550mm x 450mm x 200mm oval type of make Parryware fixed on granite top including waste coupling, waste pipe etc. complete all as specified and directed.

S&F vitreous china wash basin of size 600mm x 450mm of Make Parryware Cube model Cat No-C844E or equivalent from other makes specified in particular specifications including 19mm thick granite top with supporting wall, waste coupling, waste pipe and brackets etc. complete all as specified and directed.

S&F 600mm x 450mm beveled edged looking mirror 5.5mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

S&F in repairs 20mm dia PTMT tubular towel rail 'D' type 60cm long of make Prayag Cat No. 200 or equivalent from other makes specified in Particular Specifications complete all as specified and directed.

M&L for 18 - 20mm thick machine cut granite slab (of any type), laid over and including 20mm thick cement screed in cement mortar (1:6), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match with the shades of granite stone as in platforms/ cooking tops including cutting and polishing etc., complete all as specified and directed.

M&L vitreous china wash down water closet (pedestal pattern) white with including white coloured PVC seat cover including connections to drain (or outgoing pipe) and flush pipe etc. complete all as specified and directed.

S&F vitreous china wash down water closet squatting pan Orissa pattern of size 580mm x 440mm with integral foot rest (white or light coloured) including making connection to soil pipes and flushing cistern complete all as specified and directed.

S&F PVC low level flushing cistern 10 litre with complete accessories such as PVC flush pipe, over flow pipe etc. complete all as specified and directed.

All as per item No. 95.00 above but fixed in repairs.

S&F vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F 15mm PVC connection 600mm long with PTMT nuts of superior quality all as specified and directed.

S&F 15mm dia bib taps brass chromium plated, fancy type, long body with flange with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F 15mm dia bib tap brass chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule as per Cat No. CON-037KN of Jaquar complete all as specified and directed.

S&F 15mm dia brass chromium plated two way bib tap, long shank, screwed down, high pressure with crutch or butterfly handle, fancy type with long shank screwed both ends for iron pipe or for union make Jaquar complete all as specified and directed.

S&F 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and directed.

S&F 15mm dia pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes as per Cat No. CON-021 of Jaquar complete all as specified and directed.

S&F 15mm dia brass chromium plated angle cock with flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union as per Cat No. CON-053KN of Jaquar complete all as specified and directed.

S&F in repairs chromium plated health faucet (hand shower) with 1.2metre long PVC tube with wall hook complete all as specified and directed. Make: Jaquar Cat No. ALD-563 or equivalent from other makes specified in particular specifications.

S&F CP bottle trap (with internal partition) 32mm size with 300mm & 190mm long wall connection pipes and wall flange as per Cat No. ALD-769L300 x 190 of Jaquar or Cat No. BEA-26 of Prayag complete all as specified and directed.

S&F in repairs PTMT bottle trap having minimum water seal of 25mm for 32mm bore dia of discharge pipe (Minimum weight- 270gms) complete all as specified and directed.

S&F in repairs PTMT mixer valve with L-bend as per cat No. 1375 of Prayag or equivalent from other specified makes complete all as specified and directed.

S&F in repairs PTMT bib tap 2 way with flange plate as per Cat No. 1291 of Prayag or equivalent from other makes specified in particular specifications suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs PTMT pillar cock swan neck as per Cat No. 147-H of Prayag or equivalent from other makes specified in particular specifications suitable for 15mm bore pipe complete all as specified and directed.

S&F in repairs PTMT soap dish as per Cat No. 1951 of Prayag or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repairs PTMT toilet paper holder as per Cat No. 197 of Prayag or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repairs PTMT tooth brush holder as per Cat No. 198 of Prayag or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repairs PTMT health faucet with 1.5m long tube and hook (Ivory) complete all as specified and directed. Make: Prayag Cat No. 188 or equivalent from other makes specified in particular specifications.

S&F in repairs PTMT corner shelf 8” as per cat No. 192 or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repairs PTMT shelf 18” as per cat No. 191 or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repairs PTMT overhead round shower 100mm dia with shower arm 225mm long with flange suitable for fixing with 15mm dia pipe complete all as specified and directed. Make: Prayag Cat No. 1814 (Shower) with Cat No. 184 (Shower Arm) or equivalent from other makes specified in particular specifications.

S&F in repairs 60cm long PTMT towel rail as per cat No. 200 of Prayag or equivalent from other makes specified in particular specifications fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed.

S&F in repairs PTMT towel ring as per cat No. 196 of Prayag or equivalent from other makes specified in particular specifications all as specified and directed.

S&F stainless steel toilet paper holder with flap recessed type chromium plated as per cat No. ACN-1153S of Jaquar or equivalent from other makes specified in particular specifications all as specified and directed.

S&F in repairs soap dish, matt finished chromium plated (MCH/ Colour CP) as per Cat No. 1131N of Jaquar or Cat No. BA-25G of Prayag complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches etc. complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. including taking down existing pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. including taking down existing pipe complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches etc. including taking down existing pipe complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches etc. including taking down existing pipe complete all as specified and directed.

S&F 110mm dia PVC (SWR) bend any radius all as specified and directed.

S&F 75mm dia PVC (SWR) bend any radius all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction double (Double `T') equal or unequal with access door complete all as specified and directed.

S&F 75mm bore PVC (SWR) junction double (Double `T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) branch piece double (double 'Y') equal or unequal 110mm bore with access door complete all as specified and directed.

S&F PVC (SWR) branch piece double (double 'Y') equal or unequal 75mm bore with access door complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including joining with solvent cement 110mm dia of outlet complete all as specified and directed.

S&F in repair PTMT grating 100mm dia as per cat No. 111 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs PTMT angular stop cock suitable for 15mm bore iron pipe or for union as per cat No. 1441 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed

S&F 15mm dia brass stop valves/ angle valve chromium plated screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repairs complete all as specified and directed.

S&F PTMT ball valve with epoxy coated aluminium rod for 20mm bore pipe high pressure with polyethylene high density float and screwed for iron pipe fixed in repair complete all as specified and directed.

S&F 20mm bore gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 25mm bore gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 500 ltr capacity double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F 1000 ltr capacity double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including dismantling existing OHT complete all as specified and directed.

S&F 1000 litre capacity double layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 20mm bore ball brass valve, high pressure with polyethylene high density float and fly nut complete, screwed for iron pipe complete all as specified and directed.

S&F galvanised steel water tubing 20mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc, including taking up or down the existing GI tubing complete all as specified and directed.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls, concealed in walls/ ceilings or laid in floors etc., complete all as specified and directed.

S&F galvanised steel water tubing 20mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls, concealed in walls/ ceilings or laid in floors etc., complete all as specified and directed.

S&F galvanized steel water tubing 25mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls, concealed in walls/ ceilings or laid in floors etc., complete all as specified and directed.

Supply and laying 20mm bore UPVC pipes of pressure rating 10 Kgf/cm² fixed to wall/ ceiling or laying in floor including taking up/ down existing tubing complete all as specified and directed.

Supply and laying 25mm bore UPVC pipes of pressure rating 10 Kgf/cm² fixed to wall/ ceiling or laying in floor including taking up/ down existing tubing complete all as specified and directed.

S&F in repairs stainless steel sink with draining board of overall size 914mm x 460mm x 203mm and bowl size 405mm x 354mm x 203mm made out of 1mm thick stainless steel sheet of grade AI SI-304 with plugs, washers, waste coupling and 40mm dia waste pipe, fixed over CI brackets and connecting union to pipe etc., compete all as specified and directed. Make: Prayag Cat No. 1239D or equivalent from other makes specified in Particular specifications.

S&F in repair stainless steel plate rack of size 24" x 36" x 10" with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of good quality all as specified and directed. Make: Prayag Cat No. P-336 or equivalent from other makes specified in Particular Specifications.

M&L cutting into existing manholes for connecting new drains upto 150mm dia and making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate smooth finished & reforming benching as required complete all as specified and as directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stone work including removal of rubbish outside MD land complete all as specified and as directed.

Dismantling wall/ ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets; any thickness, including cover fillets/ snap grid etc. complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons and removing rubbish to outside MD land complete all as specified and directed.

M&L for making good of cornices architectural matching with existing view at cutting portion for rain water pipes, cutting channels, grooves exc. 15cm and making good by PCC (1:2:4) or cement mortar (1:3) as required at site complete all as specified and directed.

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor fixed on ceiling/roof etc, with modular sunken box with cover plate and frame for housing modular switches, socket outlets, fan regulators etc including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-

One light point controlled by one switch.

One Fan/ Exhaust fan point controlled by one switch.

One 3 pin socket outlet, 5amps on the same board with other switches controlled by one switch.

One 3 pin switch socket outlet, 5 Amps on independent board controlled by one switch.

One bell/ buzzer point controlled by one bell push

One light point controlled by two No. 2 way switches

M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc, including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provision of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specified for one socket outlet (plug point) three pin 15 Amps controlled by one switch 15 Amps on independent board complete all as specified and directed.

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/roof etc, including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-

One light point controlled by one switch.

One Fan/ Exhaust fan point controlled by one switch.

One 3 pin socket outlet, 5amps on the same board with other switches controlled by one switch.

One 3 pin switch socket outlet, 5 Amps on independent board controlled by one switch.

M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc, including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provision of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specified for one socket outlet (plug point) three pin 15 Amps controlled by one switch 15 Amps on independent board complete all as specified and directed.

M&L for point wiring complete with 4.0sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS-694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc, including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provision of 4.0sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete including taking down existing point wiring as specified for one socket outlet (plug point) three pin 15 Amps controlled by one switch 15 Amps on independent board.

S&F switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.

S&F ceiling rose PVC/ polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed.

Supply and fix socket outlet 2 in 1, 3 pin 5 Amps, 230 volts all as specified and directed.

Supply and fix switch socket combination flush type, 3 pin 15 Amps and 3 pin 5 Amps, 230 volts, 5 in 1, multipurpose, universal type complete all as specified and directed.

Supply and fix electronic ceiling fan regulator, flush type, 300 Watts all as specified and directed.

Supply and fix modular switch, one way, 6 Amps, AC, 230 volts, 1 module complete all as specified and as directed.

Supply and fix modular socket outlet, 6 Amps, AC, 230 volts, 2/ 3 pin combined, 2 module all as specified and as directed.

Supply and fix modular switch, one way, 16 Amps, AC, 230 volts, 1 module all as specified and as directed.

Supply and fix modular socket outlet, 6/ 16 Amps, AC, 230 volts, 2/ 3 pin combined, 2 module all as specified and as directed.

Supply and fix modular switch, two way, 16 Amps, AC, 230 volts, 1 module complete all as specified and as directed.

Supply and fix in repairs modular TV socket, 1 module complete all as specified and as directed.

Supply and fix in repairs modular telephone socket, 1 module complete all as specified and as directed.

S&F modular bell push 6 Amp, 230 volts, 1 module all as specified and directed.

S&F card base key 20A key tag with time delay electronic type 2 moudle all as specified and directed. Make: Havells Cat No. AHFSEIW000 or equivalent from other specified makes.

Supply and fix lamp holder insulated body with back plate for batten fittings/ angle holder as required taking down old damaged lamp holder complete all as specified and directed.

S&F call bell of multi music type, single pole, AC, 230 volts all as specified and directed.

Supply and fix modular fan regulator, step type, 120 watt, 2-module including taking down old damaged fan regulator any type complete all as specified and directed.

S&F wall mounted LED batten 10 watts in extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver all as per Cat No. LUMILINEPLUSBS10WLED865SPCSS of Havells or equivalent of other specified makes including 20 watts LED tube light fixed on wall surface or ceiling complete all as specified and directed.

S&F wall mounted LED batten 20 watts in extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver all as per Cat No. LUMILINEPLUSBS20WLED865SPCSS of Havells or equivalent of other specified makes including 20 watts LED tube light fixed on wall surface or ceiling complete all as specified and directed.

S&F wall mounted LED batten 22 watts in extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver all as per Cat No. LUMILINEPLUSBS22WLED865SPCSS of Havells or equivalent of other specified makes including 22 watts LED tube light fixed on wall surface or ceiling complete all as specified and directed.

S&F turboforce 4 blade (300mm sweep) exhaust fans AC single phase 230/ 240 volts, heavy duty corrosion resistant body rigid frame with rubber mountings for minimal noise operation & maintenance free design with pressure die cast aluminium rotor mounted on two ball bearings with maximum air with minimum power consumption conforming to IS: 2312-1967 complete all as specified and directed.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 8 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 4 way, 240 Volts, single door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 8623 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. fixed in switch board/ wall complete all as directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, TPN, 4 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatised, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing MCCB four pole 100 Amps, 415 volts of breaking capacity, 16kA with adjustable thermal and fixed magnetic setting conforming to IS: 13947-II including taking down the existing MCCB complete all as specified and as directed.

Supply, fix, connecting and testing isolator TPN, 63 Amps, 415 volts including taking down the existing one complete all as specified and directed.

Supply, fix, connecting and testing isolator double pole, 40 Amps all as specified and directed.

Supply, fix, connecting and testing MCB single pole (MCB SP), 6 to 32Amps, 240 volts of rupturing capacity 10kA, C curve type all as specified and directed.

Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 32 Amps, 230 Volts including taking down old one complete all as specified and directed.

M&L taking down ceiling fan and refixing the ceiling fan after carrying out necessary servicing and re-winding the fan motor including replacement of ball bearing, capacitor, bush etc. and painting the fan with synthetic enamel paint after filling the cavaties with filler complete all as specified and as directed.

M&L for submain wiring complete with two runs of 4.0 Sqmm single core, multi-stranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including rigid non metallic PVC conduit medium grade ISI marked 20mm external dia concealed in wall/ floor along with conduit fittings and accessories, fixed on ceiling with one run of 4.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified. Note: Two runs of 4.0sqmm multi-stranded cable and one run of 4.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

All as per item No. 192.00 above but including taking down existing submain wiring.

M&L for submain wiring complete with two runs of 6.0 Sqmm single core, multi-stranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including rigid non metallic PVC conduit medium grade ISI marked 25mm external dia concealed in wall/ floor along with conduit fittings and accessories, fixed on ceiling with one run of 6.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down existing submain wiring with conduit any type complete all as specified. Note: Two runs of 6.0sqmm multi-stranded cable and one run of 6.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

Supply, laying, connecting up and testing XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm 4 core laid in trenches, fixed along wall or passing through pipes/ in floors complete all as specified and directed.

Supply, laying, connecting up and testing XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 150 sqmm 3½ core laid in trenches, fixed along wall or passing through pipes/ in floors complete all as specified and directed.

Supply and laying GI tube light grade 80mm bore with all fittings laid in trenches/ floor for cable protection and for drawing earth strip/ earth lead wire etc., complete including taking down old pipe complete all as specified and directed.

Supply and lay burnt bricks, old size, sub class 'B', laid flat adjacent to each other, perpendicular to cable with width equal to length in trenches for protection of cable all as specified and as directed.

Supply, laying/ spreading in trenches clean dry sand to required width and depth at bottom and top of cable including spreading, levelling, punning for laying/ cushioning of cable all as specified and directed. Note: Punned thickness only will be considered or payment.

M&L cable jointing kit for 1100 volts grade cable for straight through heat shrink type joints complete with jointing material and accessories suitable for 150 sqmm 3½ core XLPE armoured aluminium conductor cable complete all as specified and directed.

Supply and fix 42 watts environment friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for 2’ x 2’ grid ceiling including taking down the old fitting complete all as specified and directed. Make: Havells Cat No. PLUTONEO2X2PLR42WLED840S of Havells or equivalent of other specified makes.

Supply, install, test & commissioning LT panel outdoor, floor mounted/ pedestal type, cubical, self supported, CPRI approved make, front and rear openable, double door hinged type with locking arrangement and suitable ventilations on both sides with wire mesh, IP-65 protection, fabricated out of 3mm CRCA sheet duly powder coated, mounted/ fixed on and including MS angle iron stand of 50cm height above ground, fabricated out of 50mm x 50mm x 6mm thick MS angles duly painted with black enamel synthetic paint over a red oxide primer duly grouted in PCC (1:3:6) type C-2 using graded stone aggregate as in foundation, control wiring copper stranded PVC insulated FRLS cables not less than 1.5sqmm, interconnection of suitable size/ capacity of copper strips for switch gear connection from main bus bar four run including earth bus strip of 300A capacity for entire length of panel, suitable size of MS gland with gland plate and aluminium lugs/ thimbles for all incoming/ outgoing cables etc. duly fitted with the followings complete:

Supply and fix 34 watts environment friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source suitable for 2’ x 2’ grid ceiling including taking down the old fitting complete all as specified and directed. Make: Havells Cat No. PLUTONEO2X2 PLR34WLED857S of Havells or equivalent of other specified makes.

Supply and fix 10 watts LED surface mounted downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency including taking down the old fitting complete all as specified and directed. Make: Havells Cat No. INTEGRANEOSURFACEDLS10WLED857S or equivalent of other specified makes.

Supply and fix 10 watts LED light fitting surface and wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver including taking down old fitting complete all as specified and directed. Make: Havells Cat No. ENDURALINERNEOBS10WLED865SPCWH or equivalent from other specified makes.

Supply and fix 8 watts decorative wall mounting CFL lamp fitting with housing made of SS sheet with cup shaped glass diffuser including lamp including taking down old fitting complete all as specified and directed. Make: Havells Cat No. LHJE01106499 or equivalent from other specified makes.

S&F 25 watts environment friendly, new generation, LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK07 including provision of two single core 2.5 sqmm copper conductor PVC insulated cable including taking down existing fitting complete all as specified and directed. Make: Havells cat No. ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent from other makes specified in Particular Specifications.

S&F LED wall mounting 12 watt with adjustable angle including taking down existing fitting complete all as specified and directed.

Supply, installation, testing and commissioning white colour electric geyser 25 litre capacity, 5 star rating, 2 KW power rating including grouting studs of suitable size with nuts for clamping the geyser, set of hot and cold pipes for connection and three pin 15 Amp top for making electric connection complete all as specified and directed.

S&F 10 watt LED lamp (WW ball lamp) including taking down fused lamps complete all as specified and directed.

Supply, hanging, connecting and testing ceiling fan 1250mm sweep, dust mark resistant coating, reinforced ABS blades, strong 18 pole motor with LED under light with remote control including provision of 3 core flexible copper conductor connecting wire of size 23/0.19 from ceiling fan to ceiling rose including taking down old fan complete all as specified and directed. Note: Old ceiling fan shall be deposited in store yard of AGE E/M.

S&F exhaust fan ventilator with high quality plastic white colour, 250mm sweep with louvers, 230/ 240 volts, 50Hz, single phase AC complete all as specified and directed.

Supply and fixing LED street light luminaries, outdoor type 30 watts new generation energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high power LEDs as light source and lens embedded PC cover with IP66 protection and impact resistance of IK07 suitable for operation on AC single phase 220-240 Volt, 50 Hz supply all as per Cat No. ENDURACITYLINERNEXGENSL30WLED757SASYBOPC of Havells or equivalent of other specified makes including provision of two single core 2.5Sqmm copper conductor, PVC insulated, 1100 volts cable not less than 8 metre long etc., connecting from junction boxes of poles including taking down the old fitting complete all as specified and directed.

Supply and fix on pole/ wall GI pipe bracket made out of 25mm bore light grade GI pipe 1.20m long bent to shape and fixed on pole/ wall with 2 Nos MS clamps made out 25 x 3mm flat Iron including bolts, nuts and washers etc., including taking down the existing bracket complete all as specified and as directed.

S&F LED gate light 15 watt energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED as light source including taking down the old fitting complete all as specified and directed. Make: Havells Cat No. CORALMINIPT15WLED757PSYMTOPC or equivalent of other specified makes.

M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in mass concrete in making good to damaged portion of road/ hardstanding including dismantling the concrete/ road surface complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6.0mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.5m below normal ground level, earth plate connected to galvanized iron earth wire of 4mm dia as earthing conductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES Schedule (Part I) (2009) connected to earth test point/ main switch/ DB/ Panel board all as specified or indicated including testing on completion with and including 15mm bore light grade GI protection pipe 7.5 meter long for earth strip including PCC (1:3:6), type C-1 pit with 40mm thick precast RCC (1:2:4), type B -1 cover reinforced with 12mm dia MS bars @ 150mm c/c both ways with lifting hooks made out of 12mm dia MS bars, wire mesh funnel with watering pipe 20mm dia light grade, common salt, charcoal filling in layers as specified, necessary excavation and earth work in any type of soil etc., complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode of size 60cm x 60cm x 6.3mm thick buried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to ganvanised iron strip of size 25mm x 4mm as earth lead by means of bolts, nuts and washers of galvanised iron, protected by means of 40mm dia light grade GI pipe all as specified and shown in MES schedule electrical plate No. 3 of SSR Part-I including necessary excavation and earth work in soft/ loose soil, PCC (1:3:6) type C-1 in chamber, 50mm thick RCC (1:2:4) type B-1 cover slab with 8mm dia MS bars at 100mm centre to centre both ways and MS 6mm dia hook, charcoal dust, salt, funnel for watering complete and testing the earth resistance and writing on the chamber by paint including demolition of existing earthing complete all as specified and as directed.

Taking down old unserviceable/ damaged point wiring carefully of any size and description on teak wood batten/ through pipe (light, fan, socket etc) including removal of battens, pipes/ conduits, sockets, switches, shades, ceiling fittings, bulk head fittings ceiling rose etc complete and making good disturbed portion of wall to match with the existing surface all as specified and directed.

G.L.THIRUMALAI NAIDU AND COMPANY