SPL REPAIRS TO BLDG No. T-160/162(A) (COOK HOUSE AND DINING HALL) AND PROVN OF PCC PLINTH (Size 34x14 Mtr Approx) ALONGWITH DRAIN FOR STACKING OF Hay AT 367 Coy ASC (Sup) AT PANITOLA UNDER GE DINJAN

Amount

Surface excavation averaging 15cm deep and not exceeding 30cm deep and getting out including removing the same to a distance not exceeding 50 metre, depositing as in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, etc area not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading in layers not exceeding 25cm, levelling, watering and well ramming as in soft/loose soil complete all as specified and as directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above starting point complete all as specified and as directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings complete all as specified and as directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of profile as approved, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and as directed. Note: Colour of ridge shall be same colour as that of sheet used for roof.

S&F for 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets as in roofs, etc. and fixed with 'L' type or 'J'-type or cranked hook bolts complete all as specified and as directed.

S&F for 6 mm thick, non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/aluminium framework with screws complete all as specified and as directed.

Dismantling timber scantlings 40 Sq.cm and over in section, in any position complete all as specified and as directed.

M&L for second class hardwood, scantlings, framed and fixed, wrought complete all as specified and as directed.

Dismantling of timber fillets, rails, posts, rafters, purlins etc under 40 sqcm in section complete all as specified and directed.

S&F for second class hard wood plain fillets, bull nosed, splayed, chamfered or rounded on one edge wrought, fixed with screws, cross sectional area exceeding 3 Sqcm and not exceeding 6 Sqcm complete all as specified and as directed.

S&F second class hard wood, plain fillets. square, rectangular or triangular in section, wrought, secured with nails or brads, cross sectional area exceeding 3 Sqcm and not exceeding 6 Sqcm complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not exceeding 10 cm width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete all as specified and as directed.

M&L GI wire netting 0.90 mm dia, size of mesh 12 mm, lathing to wood or metal studding, joists, etc in walls, etc including all laps, cutting and waste complete all as specified and as directed.

M&L for rendering 15 mm thick on one side of lathing in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick on other side of lathing in cement mortar (1:4) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover fillets complete all as specified and as directed.

S&F for aluminium anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestos E-boards, HSPC fixed to frame complete all as specified and as directed.

M&L for applying two coat of oil bound distemper over a coat of primer and 2mm thick wall care putty on new surfaces of seamless calcium silicate ceiling complete all as specified and as directed.

Demolition of brick work or stone/boulder masonary, built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed.

M&L for brickwork with subclass 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortor (1:6) complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortor (1:4) complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of stone or concrete surfaces etc, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick on internal surfaces of wall of brick or concrete surfaces in cement mortar (1:4) complete all as specified and as directed.

M&L for preparing new plastered surfaces of walls and applying two coats of distemper-oil-emulsion over a coat of primer and over 1mm wall care putty complete all as specified and directed.

M&L for preparation of plastered surface of external walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls, etc and applying two coats of colour wash over a coat of white wash complete all as specified and as directed.

M&L preparation of old decorated plastered surfaces of walls and applying two coat of oil emulsion distemper as specified and as directed.

M&L preparation of old decorated surfaces of external walls and applying two coat of cement base paint complete as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick, plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand (1:2) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid coloured tiles 7 to 8 mm thick (square/ rectangle) area of each tiles exceeding 0.11Sqm but not exceeding 0.18Sqm in floor etc. including 15 mm thick cement mortar (1:6) screed bed or bedding in layer set and joined in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed, coloured, ceramic, tiles of size (450x350x7mm) thick, on vertical surfaces, such as dado, etc including 10mm thick cement mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M&L for granite stone slab (of any type) 18 to 20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortor (1:6) and cutting, polishing complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20 to 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick, screed bed in cement mortar (1:6) complete all as specified and as directed.

Taking down chowkats with shutter exceeding 1.5Sqm but not exceeding 4.0Sqm each (without taking off shutters from frames) complete all as specified and as directed.

Taking down chowkats with shutter not exceeding 1.5Sqm each. (without taking of shutter from frame) complete all as specified and as directed.

S&F for second class hard wood plain solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

M&L for 35mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of 12mm thick veneered particle board medium density with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed, sizes/section of members of shutters shall be as specified in SSR Part I, Section -8, clause 8.24 (a).

S&F for 35 mm thick, glazed/skeleton shutters with second class hard wood,open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc complete as specified and directed. Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24 (a) complete all as specified and directed.

S&F for 30 mm thick, second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a).

M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and as directed.

S&F for 100 mm long butt hings medium weight cold rolled mild steel and fixed to chowkats complete all as specified and as directed.

S&F for 75 mm long butt hings medium weight cold rolled mild steel and fixed to chowkats complete all as specified and as directed.

S&F for 150 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F for 100 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F for 150 mm size, aluminium handles, cast type, anodised complete all as specified and as directed.

S&F for 100 mm size, aluminium handles, cast type, anodised complete all as specified and as directed.

S&F for aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 250 mm complete all as specified and as directed.

S&F for 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repairs vitreous china wash basin, size 550 x 400mm, white, flat back, with PVC waste pipe, CP waste coupling, chain, plug and porcelean stopper and backets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and as directed. Make : Cat No. C0450 of Parryware/ Cera/ Hindusthan/ S&F.

S&F for 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs stainless steel kitchen sinks with drainage board made of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm and bowl size 410mmx330mmx160mm complete all as specified and as directed.

S&F for stainless steel kitchne rack of size 1015x900x25 mm, wall mounted type, plate thickness shall be minimum 1mm, including necessary fixing arrangement complete all as specified and as directed.

S&F in repairs 15 mm bore, stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs 15 mm bore, bib taps, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and as directed.

S&F in repairs towel rail, 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (Minimum weight 190gms) complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removel to store complete all as specified and as directed.

Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for refixing or removel to store complete all as specified and as directed.

Supply, laying, connection and testing, 20mm bore, steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and as directed.

Dismantling of rotational moulded polyethylene water tank of capacity exceeding 500 Litres but not exceeding 1000 Ltrs complete all as specified and as directed.

S&F for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) as per IS 12701:1996, hoisted and fixed in position including provision of 20/15mm bore medium grade pipe for connecting inlet, outlet, overflow and washout pipe all as specified in SSR Part I and as directed.

M&L for 75mm thick, plain cement concrete type D-2, (1:4:8) (40mm graded aggregate) as in sub base complete all as specified and as directed.

M&L for best quality coloured chequred cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick cenent mortar (1:6) screed bed or bedding complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and as directed.

M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in surface channel, drains etc complete all as specified and as directed.

M&L for coninuous brick edging with sub class 'B' bricks, with width equal to width of brick, laid dry on end vertically complete all as specified and as directed.

Extra for forming fair finished to concrete surface of drain up to 30cm inner girth in cement including forms, mould, mitred/stopped etc complete all as specified and as directed. (Inner girth only be measured)

Extra for forming fair finished to concrete surface of drain over 30cm inner girth in cement including forms, mould, mitred/stopped etc complete all as specified and as directed. (Inner girth only be measured)

M&L for hardcore of broken bricks of gauge not exceeding 63 mm deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting with power roller exceeding 8 tonne & not exceeding 12 tonne complete all as specified and as directed.

M&L for 250mm thick cement concrete work as in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre including necessary form work complete all as specified and as directed.

M&L for forming 12mm thick, expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade ‘A’ for 250mm thick floor complete all as specified and as directed.

M&L for forming construction joint 30mmx10mm wide and full depth of concrete pavement, filled with sealing compound Grade 'A' complete all as specified and as directed.

Bringing approved earth (as approved by Garrison Engineer) from sources outside defence land including all cost such as royalty if any, transportation, taxes etc. for area filling/ forming embankments including raising (any height from EGL)/lowering by approved earth and including raising earth spreading in layers not exc 30cm thick each layer, watering, compaction with 8 tonne to 12 tonne power roller and finished to required size and shape etc, any high/depth from EGL. Notes : (i) Earth required for the item, shall be supplied by contractor, from out side MOD land of any lead, at his own arrangement. (ii) All cost of procurement of earth including cost of transportation, compaction, royalties, tax etc shall be deemed to be included in the unit rate quoted by the contractor. (iii) With reference to clause 3.6 of MES schedule Part-II on serial page No.21 it is clarified that measurement of the above item shall be of finished embankment/traverse of filled earth after consolidation/compaction and 10% deduction shall be made from measured and calculated volume to allow for increase in bulk. (iv) Total quantity / partial quantity of earth may not be available in Likabali area. The contractor shall bring the earth outside area and it is advised to quoted the rate considering availability of soil and its lead involved.

Taking down carefully unserviceable aluminium/copper point wiring (light, fan, socket or power) complete, including unserviceable fitting such as switches, ceiling roses, pendants, regulators, sockets, etc and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including PVC terminal box (sunk type) fixed with suitable sizes cadmium plated iron screws and washers etc.for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as specified and as directed.

All as per item No 88 above but one 5 Amps, 3/5 pin socket outlet on the same board with other switches complete all as specified and directed.

All as per item No 88 above but for one 3 pin switch socket combination, 5 Amps on independent board complete all as specified and as directed.

All as per item No 88 above but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 15 Amps switch socket combination on independent board complete all as specified and as directed.

S&F for switch piano, 5/6 Amp, single pole, flush type one way 230 volts complete all as specified and as directed.

S&F for socket outlet, 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and as directed.

S&F for switch socket combination, 2 in 1, 5 Amps, flush type, 240 volt complete all as specified and as directed.

S&F for switch socket combination, 5A/16A, 5 in 1, 240 volts, flush type complete all as specified and as directed.

S&F for stepped type ( five steps), 230 V electronic fan regulator flush type (socket type) complete all as specified and as directed.

S&F for ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed.

S&F for lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F for lamp LED 7 Watt, 220 volts complete all as specified and as directed. Make : Havells /Bajaj/Philips.

Taking down unserviceable sub-main wiring with rigid steel conduits/PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and as directed.

M&L for sub main wiring with two run of 6.0 Sqmm (Nominal area) single core cable PVC insulated, multistranded, unsheathed, copper conductor cables (HRFR), 1100 Volts grade drawn through PVC casing-caping of suitable size, fixed to wall/ceiling etc including one run of 6.0 Sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor (HRFR) as earth wire and duly connected to common earth point complete all as specified and as directed. Note : (a) one run PVC Casing-caping, two run wiring cables and one run of earth wire will be measured as one length. (b) All incoming and outgoing cable shall be connected by using proper lugs & sockets.

S&F in repairs factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incomming end, SPN, 8 way, 240 volts suitable for housing MCBs complete all as specified and directed. Make : Cat No. DHDPSHODRW08 of Havells/ L&T/ Legrand.

S&F in repair factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incomming end, SPN, 4 way, 240 Volts suitable for housing MCBs including complete all as specified and directed. Make : Cat No. DHDPSHODRW04 of Havells/ L&T/ Legrand.

S&F in repair MCB, 'C' Series, SP, 240 Volts, 5 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and as directed. Make : Cat No. 408587 to 408595 of Legrand / L&T/ Havells.

S&F in repair MCB, SPN, 240 Volts, 5 to 32 Amps, 'C' Series, 10KA capacity complete all as specified and as directed. Make : Cat No. 408609 to 408617 of Legrand / L&T/Havells.

S&F for MCB, four pole, 415 Volts, 63 Amps, "C" series, 10 KA breaking capacity complete all as specified and as directed. Make : Cat No TTPNC 50 - 63 of HPL/L&T/Havells.

S&F for 18 Watt surface and wall mounting type LED batten with polycarbonate housing & integrated including taking down old unserviceable light fitting. Make: Cat No. LIMILINEBS18WLED865SPCWH of Havells/ Philips /Bajaj/ /Crompton.

S&F for 10W LED energy saving new generation bulk head luminaire with opal diffuser including lamp and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make : Cat part no. RUGBYNEONFT10WLED860SSYMTOPC of Havells / Philips/ Bajaj/ Crompton.

M&L for single coat painting to ceiling fan of any sweep with 1st grade quality synthetic enamel paint by spraying, filling cavites with filler including necessary preparation of surface duly demarking fan Nos complete as specified and as directed. Note : Writing Fan No & letters shall be measured and paid separately under relevant item of this schedule.

S&F for 6/10W surface mounted square downlighter for soft diffuser lighting slim-fit low profile downlights height only complete as specified and as directed. Make : Cat part no. LHEBHEP7IZ1W006 of Havells / Philips/ Bajaj/ Crompton.

S&F in repairs 25 W LED building security new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminum housing with hight power LED as lighting source and lens imbedded PC Cover having TOP OPENING seperate driver cmpartment with IP 65 protection and impact resistance of IK07 complete all as specified and as directed.

M&L for earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, pre-cast RCC 1:2:4 type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT steel bars @15cm centre to centre in both direction and 10mm dia MS handle of suitable size, charcoal or coke and salt in alternative layers,necessary earth work in soft/loose soil all as shown in Electrical Plate No 3 of MES Schedule Part I and testing complete inclduing taking down old one/ dismantling complete all as specified and as directed.

M&L for sand cushioning and covering with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and as directed. Note: Thickness after punning down shall be measured for payment.

Supply and laying well burnt bricks, sub class 'B' bricks laid breath wise across the length of cable in trenches for protection of UG cables complete all as specified and as directed.

Supply, laying, jointing, commissioning and testing cross-linked polyethylene (XLPE) insulated, armoured cable for working voltage of 1100 Volts, PVC insulated, armoured, 3 core with reduced neutral conductor (3 1/2 Core), nominal cross sectional area of main conductor 35 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, under floors, through GI Pipe including taking out old cable complete all as specified and as directed. Note : Excvation and earth work shall be measured and paid seperately.

M&L for galvanised iron tube light grade 40 mm bore laid in trenches/road/drain/wall alongwith all fittings complete all as specified and directed with MS clamp and nut bolts and washers etc, including taking down old GI tubing alongwith all fixing accessories complete all as specified and as directed.

M&L for galvanised iron tube light grade 25 mm bore laid in trenches/road/drain/wall alongwith all fittings complete all as specified and directed with MS clamp and nut bolts and washers etc, including taking down old GI tubing alongwith all fixing accessories complete all as specified and as directed.

S&F for 25 mm dia gate valve cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union including taking down old unserviceable valve complete all as specified and as directed.

S&F for 40 mm dia gate valve cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union including taking down old unserviceable valve complete all as specified and as directed.

M/S AUTOMOTIVE WORLD

Shree Trilok Electric Corporation

M/S CHANDAN ENTERPRISE

M/S BORAH BROTHERS

M H KHAN

jitendra narayan goswami