GE (W)/HSR-53/2024-25 SPL REPAIR TO MES INSTALLATION IN BHOJRAJ AND EBS

Amount

Demolition of Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Demolition Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L Providing, cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs/Padding in slope 1:40, rounded or chamfered on edges complete all as specified and directed.

M&L for applying roof treatment on top of roof with APP based polymeric membrane (not less than 3mm thick , weight not less than 3.5Kg per Sqm, reinforced with polyster non-woven fabric ( weigthing not less than 150 gm/ Sqm ) laid by torch application method with side overlap 75mm and on end 100mm as per manufacture's instructions over a coat of hot paving bitumen of grade 30/40 conforming to IS 73 @ 1.2 Kg/ Sqm over a coat of bituminous primer conforming to IS -1984 @ 0.40 Kg /Sqm and applying two coats of aluminium paint over APP membrane over and including 15mm thick plaster in cm 1:4 using liquid WPC as per manufacture instruction over RCC roof complete all as specified and directed

Removing all disintregated and loose concrete of any thickness incl plaster if any in RCC Colmn, Chajjas, Slabs, Beams, Lintels etc, removing all loose rust/scale from exposed reinforcement bars by using wire brushes and sand paper including cleaning of exposed surfaces of reinforcemnet with protective anti corrosive epoxy bonding chemical (Mate Pidilite) and tide reinforcement bars/IRC fabric 50mm x 50mm x 12 gauge if reqd to reinforcement concrete boind primer to exposed surfaces and applying cement moter 1:3:4 with MPC (one part cement 3 part send : 1 part 6mm course aggregate) 2 and average thikness note less than 20mm including IRC 50mm x50mm)x 12mm gauge or reinforcement bars in the revoving debris complete all as specified and directed. Note : Upto the hight of 3(Three) storey building including necessary scafolding to execute the work and IRC 50mmx50mmx12 guage or reinforcement bars shall be paid separatly)

Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas upto three storey , Balcony RCC Wall, RCC water Tanks, parapet RCC Wall, and similar suspended work and making good the disturbed area in CM 1:3 complete all as specified and directed.

M&L for cutting holes in brick walls built in cement mortar /concrete for inserting support for chajjahs/ cooler plateforms / cooler standetc and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 as required super ficial area of cutting nexc 100sqcm complete all as specified and directed. Note:- cutting of holes shall be carried out by core cutting machine

S&F prepainted galvalume alumimium zinc coating GI based plain steel sheet 0.50 mm thick of any color having tensile strength of 550 MPA as a roof covering /Cladding to wall and in Chajjah , Fixed with self tapping screw complete all as specified and directed.

S&F MS framed work as in doors, gates or similar work for chajjas or gates of angles or other section with gussets plates, rails braces etc complete drilled for fixing of steel sheeting or other covering. Door etc to be prepared for handing or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing confirming to Fe 410-W (Grade E-250) quality A complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of grade Fe-410 or E-250 complete all as specified and directed.

M&L RCC in nominal mix Type B1 1:2:4 (20mm graded) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, include necessory form work complete all as specified and directed.

M&L mild steel TMT bar 10mm dia, cut to length bend to shape, hooping for ends, binding with and including MS wire not less than 0.9mm dia complete all as specified and as directed.

Dismantling asbestos cement corrugated or semi corrugated sheets as in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Brickwork with subclass ‘B’ old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L Rough cast plaster as specified (rendering coat not less than 10 mm thick in C:M 1:3 ,while it is still in pastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6to 12 mm mixed with coarse sand and cement in the ratio of 1:1 shall be applied and finished even complete all as specified and directed.

M&L Rendering 15mm thick on other then fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth with water proofing compound (without using extra lime or cement) complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for 10mm thick rendering in cement 1:3 on fair faces of concrete surface with finished surface even and smooth in ceiling/ RCC water tank & sunshade, chajjas etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, of any description etc complete all as specified and directed.

M&L Preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed.

M&L Preparing new plastered surfaces of wall and applying two coats of distemper oil emulsion over chalk whiting, white or tinted complete all as specified and directed.

Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Preparing old plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparing the old plastered /un plastered surfaces of walls including cornices by brooming down or steel wire brushing scrapping down or steel wire brushing scrapping down smoke soot etc. and applying one coat of cement base paint on wall surface to give uniform and smooth surface complete all as specified and directed.

M&L for preparing the old plastered /un plastered surfaces of walls including cornices by brooming down or steel wire brushing scrapping down or steel wire brushing scrapping down smoke soot etc. and applying one coat of oil bound distemper on wall surface to give uniform and smooth surface complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness infloors, aprons etc complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10mm thick rendering in cement mortar 1:4 backing coat for fixing complete all as specified and directed.

M&L, 20mm thick granite stone slabs table rubbed and polished as in cooking plate forms/ cill over and including 15 mm thick screed layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone complete all as specified and directed.

M&L Virified coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 Sqm not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes including dismantling of existing old tiles complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes including dismantling of existing old tiles complete all as specified and directed.

M&L Glazed ceramic coloured tiles (Designer) in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 backing coat for fixing wall tiles including dismantling of existing old tiles complete all as specified and directed.

Taking down window chowkats or frame without taking off shutters(with or without glazing and ventilator) not exc 1.5 Sqm each complete all as specified and directed.

Factory made Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Detail of box window shall be given on drawing no TD/2013/01 Sheet 1/3,2/3,3/3 (iii) Glass pane/ wire gauze shall be measured and paid separately.

Factory made Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified and directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Detail of box window shall be given on drawing no TD/2013/01 Sheet 1/3,2/3,3/3 (iii) Glass pane/ wire gauze shall be measured and paid separately.

M&L Mild steel bars as in window guard bars incl necessary welding and a shop coat of zinc primer, confirming to Fe-310-O or Fe-410-O complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc (thickness of sheet shall be 1.25mm) including PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats complete all as specified and directed.

S & F for pressed steel frames of size 90 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) including PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats complete all as specified and directed.

S & F 2nd class Hard Wood 35mm thick panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class Hard Wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR PartI, Section 8, clause 8.24 (a) complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters) complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as perspecification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick ,with particle board core(stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F Powder coated aluminium frame for doors, windows ventilators and partition with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long to each shutter, hinges type B-21 100mm long (2 nos per shutter), suitable handle (1 no per shutter) complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.

S&F powder coated aluminium door shutters/partition ,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws including mortice lock 6 lever best quality etc complete all as specified and directed. Note : (i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.

S&F powder coated aluminium of any colour deco grill of 6 mm dia (powder coating not less than 50 micron) complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body 150 mm long with rubber shoes fixed complete all as specified and directed.

S&F prelaminated particle board 18/19mm, interior grade, prelaminated one side decorative choice lamination and other side balancing white lamination fixed with screws or beading complete all as specified and directed.

S & F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed.

S&F 3 mm thick figured glass pin head type in square n.exc 0.5 sqm each pane complete all as specified and directed.

S&F sheet glass 4.8 mm thick ordinary quality in squares n exc 0.5 sq m each pane complete all as specified and directed.

Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated types, anodised, size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S & F SS butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed.

S&F 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L, for two coats of synthetic enamel pait over a coat of pink primer including preparation of new wooden Surfaces, over 10cm in width or girth, not other wise described, including preparation of new surface complete all as specified and directed.

M&L, for two coats of synthetic enamel pait over a coat of red oxide including preparation of new steel Surfaces, over 10cm in width or girth, not other wise described, including preparation of new surface complete all as specified and directed.

S & F mild steel 25 mm dia drapery rod, decorative type, with PVC coating and fixed in repairs complete all as specified and directed.

S & F MS bracket, decorative, superior quality, suitable for 25 mm dia drapery rods, complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid of size 605mmX605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

S&F Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre or E-ceiling or similar material Board for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick single side prelaminated or fancy pattern color PVC sheet inclusive PVC 'L', corner and end beading and fixing with screw or with solvent cement required at site on wall complete all as specified and as directed.

Dismantling old unserviceable PVC water tanks exc 250 & n exc 500 ltrs capacity complete all as specified and directed.

Dismantling old unserviceable PVC water tanks exc 500 & n exc 1000 ltrs capacity complete all as specified and directed.

Supply and fixing rotional molded polythylene water storage tank three layer white 500 ltr capacity, triple layer (Cylinderical vertical with closed top) hoisted kand fixed in position complete all as specified and directed.

Supply & fixing 1000 liter capacity ISI marked double layered rotational molded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position including making inlet/outlet connection complete all as specified and directed.

S&F ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed.

M&L Taking up or down15mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

M&L Taking up or down20mm dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

M&L 15mm GI steel Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L 20mm GI steel Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing 15mm dia old steel tubing and connections in new or oldposition (Walls, ceiling, floors, etc.) complete all as specified and directed.

Refixing 20mm dia old steel tubing and connections in new or oldposition (Walls, ceiling, floors, etc.) complete all as specified and directed.

S&F in repair stainless steel sink without drainage board made of stainless steel of 1 mm thick for kitchen with plugs, washer and wates including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x420mm and bowl size 410mm x 330mm x 160 mm, complete all as specified and directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat, cover, 'P'/'S' trap, WC connector with leaping ring connection to trap including cement concrete and making good to floor complete all as specified and directed.

S&F in repair, PVC Low Level cistern 10 litre capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete all as specified and directed.

S&F in repair Vitreous china wash basin white flat back size 550 x 400mm size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe and 15mm pillar tap cast copper alloy with capstan head chromium plated complete fixed in repair complete all as specified and directed.

S&F in Repair Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automaticflushing cistern with brackets,flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

Supply& fixing of 32mm bore Waste coupling of PTMT(half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms suitable for urinal complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore fixed in repairs complete all as specified and directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm chromium plated cast copper alloy bib taps fixed in repair complete all as specified and directed.

S&F in repair fancy type chromium plated Angle valves, cast copper alloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified and directed.

S&F in repair fancy type chromium plated with long shank and cup (concealed type) stop valves, cast copper aloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.

S&F in Repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in Repair Towel Rail 600mm long of PTMT fixed and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S&F soap dish vitreous china white approximate size 160x160x90mm fixed to plugs with chromium plated brass screw fixed in repair complete all as specified and directed.

S&F PVC floor trap 110mm fixed in repair complete all as specified and directed.

S&F single/multi PVC (SWR) floor trap 75mm dia, palin with grating including joining to waster pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate fixed in repair complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre lineover fittings and accessories) complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed. Make : PRINCE / SINTEX / FINOLEX

S&F PVC (SWR) bend 110mm dia complete all as specified and directed.

S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. Make : PRINCE / SINTEX / FINOLEX

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed. Make : PRINCE / SINTEX / FINOLEX

S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed. Make : PRINCE / SINTEX / FINOLEX

S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed. Make : PRINCE / SINTEX / FINOLEX

S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed. Make : PRINCE / SINTEX / FINOLEX

M&L for concrete bed to drain pipe of 150mm bore including packing under haunching against the sides of pipe after they are laid and tested in cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate for NP2/PVC pipe including demolition and breaking up sewage/drain pipe (SGSW/AC or RCC/PVC) of 150mm bore pipe set in cement mortar complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

S&F Steel rolling shutters, 1.25mm thick sheet with out ball bearing, as specified, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated,complete: gear operated type with bevel gear box and crank handle include make good to the wall complete fixed in repair complete all as specified and directed.

S&F Ball bearing suitable for rolling for shutter complete all as specified and directed.

S&F Safty lever locks 4 lever mild steel for rolling shutters complete all as specified and directed.

Surface excavation including site clearance(including removal of bushes, trees less than 30 cm girth) not exceeding 30cm deep and averaging 15cm deep and getting out removing the debris from the site upto 50 mtr complete all as specified and directed.

Excavation in post holes each n. exc .50 cum, getting out in soft/loose soil and removing surplus material n. exc 50 mtr and making good disturb surfaces complete all as specified and directed.

M&L for plain cement concrete type C-2 1:3:6 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M & L 10 mm dia MS round bar for fixing of chain link fencing with post complete all as specified and directed.

S & F MS work in posts and struts in fencing including cutting tops to shape as directed , drilling holes notching for wire etc, flat iron fillets for securing wire mesh including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S & F 12mm dia 40mm long MS screw bolt machine made with hexagonal or Square head at one end and screwed the other,screwed end fixed with washer complete all as specified and directed.

Supply only GI Chain link fencing, any dia,any size or type complete all as specified and directed.

Fixing only GI chain link fencing of any dia, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire complete all as specified and directed.

M & L one coat of red oxide primer on new steel surfaces of any description not exc 10 Cm in width or girth including preparation of surfaces complete all as specified and directed.

M & L two coat of black bituminous paint over a coat of red oxide primer on new steel surfaces of any description exc 10 Cm in width or girth including preparation of surfaces complete all as specified and directed.

M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed fixed in repair with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed fixed in repair (each line wire to be measured) complete all as specified and directed.

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L PCC (1:2:4) type B-1 using 20mm graded stone agg as in coping finished even and fair without using extra cement complete all as specified and directed.

M&L 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection complete all as specified and directed.

M&L for 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone agg in floor finishes fair & smooth without using extra cement complete all as specified and directed.

M&L 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as sub base under floor complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and no pigments, set, jointed and pointed in neat cement slurry including 20 mm thick screed bed in cement mortar 1:6 for laying in floors incl demolition of tiles complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness infloors, aprons etc. complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment over 25 mm thick sand cushoning including dismantling/demolition complete all as specified and directed.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with switches/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per existing treatment complete all as specified and directed.

Description all as per item No 136.00 above but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board complete all as specified and directed.

Description all as per item No 136.00 above but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

Description all as per item No 136.00 above but point wiring with 2.5 sq mm single core FR cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts all as specified and directed

S&F Modular switch 1 way 16A 1 module all as specified and directed

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F modular fan step regulator 120W-2 module suitable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F Sheet metal enclosure distribution board SPN,8 way, double door powder coated, protection class IP-42 suitable for mounting MCB DBs confirming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing in repair MCBs SP 6 to 32Amps, B-curve, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply and fixing MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

S & F in repair for Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equivalent in Philips, Wipro.

Taking down old unserviceable submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable for phase, one run of 6 sqmm cable for earthing and one run of PVC conduit will be measured as one unit.

S&F 20 Watt post top luminarie made of pressure die cast aluminium housing 240 volt AC 50 Hz prewired complete with necessary fitting all as specified and directed.

M/S RAJESH KUMAR & SONS (BID ID -3154844)