SITC of DG

Amount

Supply, delivery at site on foundation, commissioning of 160 KVA, 415V, 50Hz, 3Ø silent new DG Set, comprising of Engine, alternator, separate AMF panel, Base frame, Fuel tank, Battery, CPCB IV+ approved Engin & Acoustic Enclosure including transportation, loading and unloading of the DG set, having following specifications :- [Make: Cummins JAKSON / KOEL GREEN / GREAVES POWER / Volvo/ Catterpillar].

ENGINE

Make : CUMMINS / KIRLOSKAR / GREAVES POWER / Volvo / Catterpillar.

Engine Type : 4 Stroke Diesel Engine

Rated Output : 196 BHP or Higher

Duty : PRIME

Cooling : Water cooled with radiator

Cylinder : 6/8

Aspiration : Turbo Charged

Type of Governer : Electronic

Fuel Tank Capacity : Minimum capacity 250 Ltrs. or above.

Fuel Consumption at 75% rated Load with Radiator or Fan : 28.41 Ltr./ Hr. or Less. Lube Oil change period - 550 hrs or above.

Fuel Consumption at 100% rated Load with Radiator or Fan : 36.9 Ltr./ Hr. or Less

Overload Capacity : 10% overload for one hour for every 12 hours continious running at full load or better.

Engine instrument Panel : Consisting of starting switch with Key, Lube Oil Indicator, water temperature Indicator, RPM indicator and hour meter.

Safety Controls : Emergency Stop, Low Lube Oil Pressure warning/ Shutdown, High Engine Water Temp. warning/ Shutdown, Sensor failure Indicator, Engine overspeed indicator, Battery charging and low battery indicator

Exhaust Silencer : Residential Type

Starting system : 12V./ 24 V. starting system complete with starter motor, charging alternator with rectifier and Cutout as per manufacturer standard.

Battery : Lead Acid, Low Maintenance or SMF and conforming to relevant IS Specification with Low/High Battery Voltage and Weak Battery warning. Displacement - 7000ce and above.

ALTERNATOR

Make : STAMFORD / KIRLOSKAR GREEN / GREAVES POWER / Volvo / Catterpillar / LEROY SOMER.

Rating : 415 V., 3Ph. 50 Hz., 160 KVA, 1500 rpm

Type : Brushless, self excited and self regulated

Insulation : Class H

Protection : Screen-protected drip proof with Min.IP-23 degree of protection

Voltage Regulation (max) : ±1%

Winding connection : Star with Neutral

Total Distortion factor : Less than 3%

Total Harmonic distortion in output waveform : < 5%

AMF PANEL

Cubical type floor mounted AMF panel made from 16 SWG Sheet Steel, duly pretreated, powder coated painted and aesthetically finished, suitable for controlling of 160 KVA DG set having following specification/features.

i) 250 A , 4 pole Power Contactor & MCCB with O/L, S/C, E/F protection and microprocessor based protection release , U/V release etc. - 2 Sets

ii) In Built By-Pass switch for rated capacity

iii) On -delay timer for load change over

iv) On-delay timer for engine shut off

v) Engine On-Off switch (Push button type)

vii) Minimum five number indicating lamps to indicate 'mains ON', 'load on mains', Set running', 'load on set' and 'battery charger on'.

viii) Audio visual alarm for 'Low lubricating oil pressure', 'High water temperature, Start failure', and DG over load'.

x) Microprocessor based relay with composite meter for digital display of following.

Generator voltage/AC Mains voltage.

Generator Current in all phases

Frequency

Power Factor

Energy

Indication for alternator supply

Running time indications number of hours of operation and service intervals, service due indications.

The AMF panel must be designed to ensure trouble free performance and ensure switching over Electrical Load to DG within 15 (fifteen) second from the instant of mains failure.

ACOUSTIC ENCLOSURE

The DG set should have integrated acoustic enclosure at the manufacturing state itself. High quality acoustict enclosure must be certified as per CPCB-IV+ norms.

BASE FRAME

Common iron channel fabricated base frame containing the engine and alternator, mounted on AVM pads and having provision for lifting Hook.

TERMS & CONDITIONS

(i) Rate should be quoted inclusive of all applicable taxes and Duty etc.

(ii) All materials, equipments & accessories must conform to relevant IS /IEC specifications. The DG Set to be supplied must be from the authorized OEM of the respective Engine Manufacturer.

(iii) Necessary manufacturer's test certificate for Diesel Engine, Alternator etc. Will have to submit in triplicate copy during delivery of the equipment.

(iv) Copy of "Type Approval Certificate" and Certificate of "COP" must be produced at the time of delivery issued from competent Authority (As per CPCB-IV+).

(v) Circuit Diagram for AMF Panel must be submitted from the Manufacturer/OEM.

(vi) The entire set must be warranted at least 15 months from the date of commissioning. However Engine & Alternator should be warranted of 2 years/5000 Hrs, whichever is earlier.

M/S. N.C. HORE (BID ID -6193387)

NARAYAN CHANDRA DAS (BID ID -6283017)