REPAIR OF BED HARD CHARPOY TP FURNITURE AND MISC ITEMS OF OTM AND MD ACCN UNDER BSO OF GE BENGDUBI

Supply and fixing in replacement of following unserviceable items of Bed Hard Map complete all as shown and specified in drawing and as directed by Engr-in-Charge. (FD/E6/MAP/08 (R)

Head board of Bed hard MAP made of 18mm thick prelaminated MDF board both side laminated exterior gde, Type-I with 0.8mm thick PVC edge bending Tape of make:- REHAU/Fixin/Pegasus/ Kinex pasting with synthetic adhesive/ glue (probond) alround as per shown specified in drg and directed by Engr-in-charge. (Make of MDF Board/ ECO Board/ Action Tesa/ Century Ply/ Green Ply/ Archid Ply)

All as per Srl. Item No:-1.01 here-in-before but foot board of Bed hard MAP. (FD/E6/MAP/08(R)

12mm thick plywood BWR Gde as per IS:303:1989 of size 1980 x 900mm of Make - Century Ply/ Green Ply/ Archid Ply/ Duro with necessary steel screw to top of Bed Hard Map all as shown and specified in drg and directed by Engr-in-Charge. (FD/E6/MAP/08(R)

PVC shoes to legs of Bed Hard MAP all as per shown and specified in drg and directed by Engr-in-Charge. (FD/E6/MAP/08(R)

Supply and fixing in replacement of following unserviceable items of Charpoy I.P with hard top complete all as specified and shown in drawing and as directed by Engr-in-Charge. (FD/MAP-II/01)

12mm thick plywood BWR Gde as per IS:303:1989 of size 1980 x 900mm of Make - Century Ply/ Green Ply/ Archid Ply/ Duro with necessary steel screw to top of Charpoy I.P with Hard Top and all as specified and shown on drg and directed by Engr-in-Charge. (FD/MAP-II/01)

Long rail of MS hollow pipe size 1980 x 65x25mm of 16 guage of make:- Appolo/Nizon of Charpoy I.P with hard top complete all as specified and shown on drg and as directed by Engr-in-Charge. (FD/MAP-II/01)

32 mm x 32 mm horizontal frame of MS tube legs (16 Gauge) duly 2 coat painted by spray gun machine. (FD/MAP-II/01)

32 mm x 32 mm MS tube legs (16 Gauge) duly 2 coat painted by spray gun machine. (FD/MAP-II/01)

25 mm x 25mm (Square pipe 16 gauge) stiffeners duly 2 coat painted by spray gun machine. (FD/MAP-II/01)

25 mm x 60mm x 6 mm MS cleat welded with frame to support ply. (FD/MAP-II/01)

32 mm x 32 mm x 5 mm MS plate. (FD/MAP-II/01)

Hard Rubber shoes. (FD/MAP-II/01)

Dismantling & re-assembling/tightening of all members/parts of charpoy G.I. Pipe carefully including removing of any type newar / nylon newar/plywood from charpoy and segregate the serviceable and unserviceable parts and stacking of serviceable parts complete as per directed by Engr-in-Charge. (FD-220) (Note:-Spare parts required for repair will be measured and paid separately)

Supply and fixing new long rail of G.I tubing 32mm bore medium grade duly threaded both ends all as specified and shown on drg as directed by Engr-in-Charge.

Labour only short rails as made out from the unserviceable long rail parts under item No. 3.01 above including cutting and threading at the both ends and fixed in position complete all as per drg and as directed by Engr-in-Charge. (FD-220)

Labour only leg as made out from the unserviceable short rail under item No 3.02 above including cutting and threading at one end and fixed in position complete as per drg and directed by Engr-in-Charge.(FD-220)

Supply and fixing only G.I elbow three way of size 32mm bore ISI mark in replacement of unserviceable elbow of Charpoy G.I Pipe (FD-220).

Supply and fixing only G.I check nut of size 6mm thick 32mm bore ISI mark in replacement of unserviceable check nut of Charpoy G.I Pipe (FD-220).

Supply and fixing in replacement of old unserviceable wooden blocks/ MS Sheet/cleat with new one made of 2nd class hard wood to legs of charpoy G.I Pipe all as per directed by Engr-in-Charge. (FD-220)

Supply & fixing of stiffener of size 40mm X 06mm MS flat iron of 85cm (+/- 2cm) length with three holes of size 10mm (One in the centre and one each on both side of centre hole at a distance of 12’’) duly spray painted 2 coat over a coat of primer complete all as specified and as directed by Engr-in-Charge (FD-220).

Removing the unserviceable existing plywood from Charpoy G.I Pipe and supply and fixing new plywood only of size 1980x900mmx 12mm thick BWR Gde, AA Type of Make - Century Ply/ Green Ply/ Archid Ply/ Duro as per IS:303:1989 all as directed by Engr-in-Charge (FD-220).

Supply and fixing in replacement of following unserviceable items of Charpoy Folding I.P with hard top complete all as specified and shown in drawing and as directed by Engr-in-Charge. (FD-388 (R)

12mm thick plywood BWR Gde as per IS:303:1989 of size 1980 x 900mm of Make - Century Ply/ Green Ply/ Archid Ply/ Duro with necessary steel screw to top of Charpoy folding I.P with Hard Top and all as specified and shown on drg and directed by Engr-in-Charge. (FD388 (R)

Supply and fixing in replacement of following unserviceable items of Table Bed Side Steel(MAP) complete all as specified and shown in drawing and directed by Engr-in-Charge. (FD/E6/MAP/15(R)

18mm thick plywood MR Gde with 0.8mm thick laminated sheet on both side in lieu of 18mm thick prelaiminated MDF/Particle board top with 0.8mm thick PVC edge bending tape of make:- Rehau/Fixin/Pegasus/Kinex fixing with necessary synthetic adhesive/glue (probond) all around the top and fixed to frame of Table bed Side Steel (MAP). (FD/E6/MAP/15 (R)

All as per Srl. Item No. 5.01 but sides of Table bed side Steel MAP screwed to frame of table bed side all as per shown and specified in drg and directed by Engr-in-Charge. (FD/E6/MAP/15 (R)

All as per Srl. Item No. 5.01 but bottom of Table bed side Steel MAP screwed to frame.(FD/E6/MAP/15 (R)

All as per Srl. Item No. 5.01 but upper drawer of Table bed side Steel MAP on teak wood runner.(FD/E6/MAP/15 (R)

All as per Srl. Item No. 5.01 but lower drawer of Table bed side Steel MAP on teak wood runner.(FD/E6/MAP/15 (R)

All as per Srl. Item No. 5.01 but back Ply shall be 12mm thick MR Gde plywood screwed to frame.(FD/E6/MAP/15 (R)

Front side 18mm MS square frame work pipe duly 2 coat painted by spray gun machine. (FD/E6/MAP/15 (R)

Back side 18mm MS square frame work pipe duly 2 coat painted by spray gun machine. (FD/E6/MAP/15 (R)

Drawer handle 100mm long of C.P. (FD/E6/MAP/15 (R)

Hard rubber shoes. (FD/E6/MAP/15 (R)

Teak wood runner fixed with steel screw. (FD/E6/MAP/15 (R)

Supply & fixing in replacement of following unserviceable items as per existing make and model of Chair Revolving long back complete all as shown in drawing and as directed by Engr-in-Charge.

Supply and fixing in replacement of seat of chair revolving made of 75mm thick cushioned 32 density covered with new tapestory cloth as per sample of existing chair complete all as directed by Engr-in-Charge. (FD-TP)

All as per Srl item No. 6.01 here-in-before but back of chair revolving. (FD-TP)

Supply and fixing in replacement of hydraulic system of chair revolving complete all as directed by Engr-in-Charge. (FD-TP)

Supply and fixing in replacement of arms of chair revolving all as directed by Engr-in-Charge. (FD-TP)

Supply and fixing in replacement of pedestal (bottom) consisting of five legs with twin wheel coaster of chair revolving complete all as directed by Engineer-in-Charge. (FD-TP)

Supply and fixing in replacement of M.S frame with all mechanism under seat of chair revolving complete all as directed by Engineer-in-Charge. (FD-TP)

Supply & replacement of following unserviceable items of Table Computer complete all as specified and shown in drawing and as directed by Engr-in-Charge. (FD/E6/MAP/03)

Top shall be made out of 18mm thick MR Gde Plywood of Make - Century Ply/ Green Ply/ Archid Ply/ Duro duly post formed covered/pasted with 0.8mm thick laminated sheet of Make - Centurylam/ Greenlam/ Archidlam/ Merino with 0.8mm thick PVC edge bending tape of make:- Rehau/Fixin/Pegasus/Kinex pasted with necessary synthetic/glue (probond) in liue of prelaminated MDF/particle board all as shown and specified in drg and directed by Engr-in-Charge. (FD/E6/MAP/03)

Drawer of Table Computer. (FD/E6/MAP/03)

Telescopic channel of drawers fixed with screw of make:- Godrej/Hettich/ Ebco. (FD/E6/MAP/03)

Pul out tray/shelf of key board with telescopy channel. (FD/E6/MAP/03)

Sides of Table Computer (FD/E6/MAP/03)

Removing of unserviceable/broken parts of Table dining 6/4 persons MAP without damaging or other parts and Supply & fixing in replacement of following unserviceable items of Table dining 6/4 persons Map complete all as shown and specified in drawing and as directed by Engr-in-Charge. (FD/MAP-II/03)

Supply and fixing in replacement of top of table dining 6 persons of size 1500x900mm made of 18mm thick MR Gde plywood duly post formed covered/pasted with 0.8mm thick laminated sheet on both side with 0.8mm thick PVC edge bending tape of make:- Rehau/Fixin/Pegasus/Kinex with necessary glue/adhesive (probond)all around top in lieu of prelaminated MDF/Particle Board to table dining 6 persons of size and shape all as specified and shown in drg and directed by Engr-in-Charge. (FD/MAP-II/03)

All as per item No. 8.01 but Table dining 4 Persons of size 1200x900mm all as shown on drg. (FD/MAP-II/03)

Replacement of legs of table dinning 06/04 persons with new legs of size 90x45x740mm made of 1st class hard wood teak size and shape all as shown on drg. (FD/MAP-II/03). (FD/MAP-II/03)

All as per Srl. Item No. 8.03 but long rails of size 1500x90x45mm thick for Table dining 6 persons size and shape all as shown on drg. (FD/MAP-II/03)

All as per Srl. Item No. 8.03 but long rails of size 1200x90x45mm thick for Table dining 4 persons size and shape all as shown on drg. (FD/MAP-II/03)

All as per Srl. Item No. 8.03 but short rails of size 900x90x45mm thick for Table dining 6/4 persons. (FD/MAP-II/03)

All as per Srl. Item No. 8.03 but wooden bracket of size 100x100x30mm for table dining 6/4 persons. (FD/MAP-II/03)

All as per Srl. Item No. 8.03 but middle rails of size 900x90x25mm thick for Table dining 6/4 persons. (FD/MAP-II/03)

Supply & fixing in replacement of following unserviceable items of Mirror dressing gents complete all as shownand specified in drawing and as directed by Engr-in-Charge (FD/E6/MAP/16).

Supply and fixing in replacement of unserviceable whole cabinet box of table dressing gents with mirror (MAP) made of 18mm thick MR Gde plywood as per IS:303:1989 of Make - Century Ply/ Green Ply/ Archid Ply/ Duro duly post formed covered/pasted with 0.8mm thick laminated sheet both side of Make - Centurylam/ Greenlam/ Archidlam/ Merino including 0.8mm thick PVC edge bending Tape of make:- REHAU/ Fixin/Pegasus/Kinex pasted with necessary glue/adhesive (probond) alround to table dressing gents all as specified and shown on drg. (FD/E6/MAP/16).

All as per Srl. Item No. 9.01 here-in-before but back ply of Mirror frame of 6mm thick MR Grade of Table dressing gents with mirror (MAP) all as specified and shown on drg and directed by Engr-in-Charge. (FD/E6/MAP/16)

Supply and fixing in replacement of complete frame of mirror made of 1st class hard wood teak all as specified and shown on drg of table dressing gents with mirror (MAP). (FD/E6/MAP/16)

Supply and fixing in replacement of 75mm long stainless steel hinges to table dressing gents with mirror all as per shown on drg complete and as directed by Engr-in-charge. (FD/E6/MAP/16)

Supply and fixing in replacement of glass shelf of table dressing gents with mirror of size 600x100mmx 5.0mm thick all as specified and shown on drg and directed by Engr-in-Charge. (FD/E6/MAP/16)

Supply and fixing in replacement of looking mirror to table dressing gents with mirror MAP with new looking mirror 5 mm thick of Make - Saint Gobain/ Modiguard/ Atul Swastik of size 750x600mm and shape as shown on drg and as directed by Engineer -in- Charge. (FD/E6/MAP/16)

Supply and fixing in replacement of following unserviceable items of Bin Linen Multipurpose without damaging the other parts complete all as shown and specified in drawing and as directed by Engr-in-Charge. (FD/E6/MAP/09)

Removing of old unserviceable top from bin linen multipurpose and supply and fixing new top made out of 18 mm thick MR Gde plywood of Make - Century Ply/ Green Ply/ Archid Ply/ Duro duly post formed covered with 0.8mm thick both side laminated sheet with 0.8mm thick PVC edge bending tape of make:- Rehau/Fixin/Pegasus/Kinex all as shown and specified in drg and as directed by Engr-in-Charge (FD/E6/MAP/09).

All as per Srl. Item No. 10.01 here-in-before but door shutters.(FD/E6/MAP/09).

Removing of old unserviceable hingses and S&F of new hinges to bin linen multipurpose as per size and design shown on drg complete all as specified and directed (FD/E6/MAP/09).

Removing of old broken handles and S&F of new chromium plated steel handles to bin linen multipurpose as per sample kept at BSO (Office) & as shown on drg and as directed by Engr-in-Charge (FD/E6/MAP/09).

Removing of old magnetic catcher and S&F of new magnetic catcher (EBCO/Godrej/Hettich) to bin linen multipurpose as per size and design shown on drg complete all as specified and directed by Engr-in-charge/GE (FD/E6/MAP/09).

Supply and fixing in replacement of following unserviceable items of Hat Stand with Mirror without damaging the other parts complete all as shown and specified in drawing and as directed by Engr-in-Charge. (FD-233)

Removing old broken/unserviceable teak plywood from front frame of hat stand and S&F new 03mm thick one side teak face vineer plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed (FD-233).

Removing old broken/ unserviceable plywood from back side of hat stand and S&F new 04mm thick MR Gde plywood as per shape and size shown in drawing including french polishing to match the other parts complete all as specified and directed (FD-233).

Removing of old/ broken looking mirror from hat stand with mirror and supply and fixing new looking mirror of size 300 x 440 x 5mm fixed in position complete all as shown on drawing (FD-233).

Removing old broken/unserviceable beading from hat stand and S&F new 06x35 mm thick teak wood beading all as per drawing including french polishing to match the other parts complete all as specified and directed (FD-233).

Removing old broken/unserviceable wooden battens from hat stand and S&F new teak wood wooden battens as per shape and size shown in drawing and as directed (FD-233).

Removing of old unserviceable aluminium/ brass pegs from hat stand and S&F new brass pegs of size 120x75mm (overall) of latest pattern to hat stand all as directed by Engr-in-Charge/GE (FD-233).

Supply and fixing in replacement of following unserviceable items of Table bed side without damaging the other parts complete all as shown and specified in drawing and as directed by Engr-in-Charge. (FD-276)

Removing of old unserviceable top from table bed side and supply and fixing new top made out of 18 mm thick MR Gde plywood duly post formed covered with 0.8mm thick laminates on both side duly of colour / shade as approved by Engr-in-Charge / GE (FD-276).

All as per srl item No 12.01 here-in-before but side of table bed side (FD-276).

All as per Srl. Item No. 12.01 here-in-before but middle shelf of table bed side (FD-276).

Removing of old unserviceable back ply from table bed side and S&F the new back ply of same size of 06mm thick plywood duly laminated both sides as per colour/shade approved by Engineer-in-charge/GE (FD-276).

Supply and fixing in replacement of following unserviceable items of Teapoy Verandah MAP without damaging the other parts complete all as shown and specified in drawing and as directed by Engr-in-Charge. (FD/E6/MAP/17)

Supply and fixing in replacement of top of teapoy Verandah MAP with new top made out of 18/19mm thick MR Gde plywood duly post formed covered with 0.8mm thick laminated sheet on both side including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin/ Pegasus /Kinex pasted with necessary adhesive/glue (probond) alround the top all as per shown on drg and directed by Engr-in-Charge. (FD/E6/MAP/17).

Supply and fixing in replacement of following unserviceable items of Book Case without damaging the other parts complete all as shown and specified in drawing and as directed by Engr-in-Charge. (FD-237)

Supply and fixing in replacement of Top of book case made of 18/19mm thick MR Gde plywood duly post formed covered with 0.8mm thick laminated sheet including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin/Pegasus/Kinex pasted with necessary adhesive/glue (probond) alround size and shape as shown on drg.

All as per Srl. Item no. 14.01 but sides of book case (FD-237).

All as per Srl. Item No. 14.01 but shutters of book case including piano type Stainless Steel hinges and including wall catcher of make:- Ebco/Hettich/Godrej and aluminium anodized knob (FD-237).

All as per Srl. Item No. 14.01 but bottom of book case all as shown on drg (FD-237).

All as per Srl. Item No. 14.01 but shelf of book case (FD-237).

All as per Srl. Item No. 14.01 but back of book case made of 6mm thick MR Gde plywood all as shown on drg (FD-237).

Supply and fixing in replacement of leg and batten frame of book case made of 1st class hard wood teak of size and shape as shown on drg (FD-237).

Supply and fixing in replacement of following unserviceable items of Table dressing ladies with mirror including stool MAP without damaging the other parts complete all as shown and specified in drawing and as directed by Engr-in-Charge. (FD/MAP-II/07)

Supply and fixing in replacement of looking mirror of table dressing ladies MAP with new looking mirror of 5 mm thick of size 1300x450mm and shape as shown on drg and as directed by Engineer -in- Charge. (FD/MAP-II/07)

Supply & fixing in replacement of entire frame of mirror of table dressing ladies made of teak wood of size and shape as shown on drg and directed by Engineer-in-Charge. (FD/MAP-II/07)

Supply & fixing in replacement of 6mm thick MR Gde plywood of back of Mirror of table dressing ladies. (FD/MAP-II/07)

S & F of entire cabinet/box of table dressing ladies with mirror including drawers made of 18/19mm thick MR Gde plywood in lieu of prelaminated MDF/Particle board duly post formed covered with 0.8mm thick laminated sheet including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin/Pegasus/Fixin pasted with necessary adhesive/glue (probond) alround all as shown on drg of Table dressing ladies and directed by Engr-in-charge. (FD/MAP-II/07)

Supply and fixing in replacement of unserviceable drawers of table dressing ladies made out of well seasoned hard wood teak with bottom plywood 6mm thick including aluminium anodized knob all as shown and specified on drg and directed by Engr-in-Charge. (FD/MAP-II/07)

All as per Srl. Item No. 15.05 but stool of Table dressing ladies MAP. (FD/MAP-II/07)

Material and labour for painting to frame of Bed Hard Map with synthetic enamel black paint after removing of rusted/damage paint with paint remover/ grinding machine including preparation of surface with rubbing with emery paper to MS pipe as specified and directed by Engineer-in-Charge. (FD/E6/MAP/08(R)

Material and labour for painting to frame of Chaproy I.P with hard top with synthetic enamel black paint including preparation of surface with rubbing with emery paper to MS pipe as specified and directed by Engineer-in-Charge. (FD/MAP-II/01)

All as per Srl. Item No. 17 here - in- before but Charpoy folding I.P with hard top. (FD-388(R)

All as per Srl. Item No. 17 here - in- before but Table bed side Steel (MAP). (FD/E6/MAP/15 (R)

All as per Srl. Item No. 17 here - in- before but Table Computer. (FD/E6/MAP/03)

All as per Srl. Item No. 17 here - in- before but Teapoy Verandah including 04 Nos hard rubber shoes to legs of Teapoy Verandah. (FD/E6/MAP/17)

Material and labour for french polishing two coats with best quality french polish on exposed surfaces to Table dining 6 Persons (except top) upto good looking after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface and providing 04 Nos hard rubber shoes to legs of Table as shown and specified in drg and directed by Engineer-in-Charge. (FD/MAP-II/03)

All as per Srl item No. 22 here-in-before but Table dining 4 Persons. (FD/MAP-II/03)

All as per Srl item No. 22 here-in-before but Table dressing gents MAP. (FD/E6/MAP/16)

All as per Srl item No. 22 here-in-before but Bin Linen Multipurpose. (FD/E6/MAP/09)

All as per Srl item No. 22 here-in-before but Hat Stand with Mirror. (FD-233)

All as per Srl item No. 22 here-in-before but Table bed side. (FD-276)

All as per Srl item No. 22 here-in-before but Book Case wooden. (FD-237)

All as per Srl item No. 22 here-in-before but Table dressing ladies with mirror MAP. (FD/MAP-II/07)

M & L for spray painting two coats to Almirah Large Steel 1/2 H X 1/2 Shelf with synthetic enamel mettalic spray paint internaly and externaly portion, after removing of rusted/damage paint with paint remover/ grinding machine and providing putty to surface of Almirah Large Steel after removing denting and making good of bends surfaces if any and refixing of loose shelves with MS stay hook/revetting/arc welding as required, complete all as specified and shown in drg and directed by Engineer-in-Charge. (FD/E6/MAP/18)

All as per Srl. Item No. 30 here-in-before but Rack Six tier Steel (FD-1038)

All as per Srl. Item No. 30 here-in-before but Rack shoe Steel (FD/E6/MAP/02(R)

All as per Srl. Item No. 30 here-in-before but Trestle Store Room Steel (FD-1043)

All as per Srl. Item No. 30 here-in-before but Book Case Steel 04 doors (FD-1043)

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 68,815.00 (refer Sch of credit). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

Please Enable Macros to View BoQ information