Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-AOC NIVADA TIVAYA ROAD TIVYA MUST BUS STOP VILLAGE KHATAULI SAHARANPUR UP 247001 | SAHARANPUR | SAHARANPUR | UP | 247001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹12.0 L+₹2.2 L (22.4%)Rejected-Finance 13 218 MASJID EXTEN SADAR BAZAR | L2 | Rejected-Finance Being L2 |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
31 Mar 2020, 6:00 pmClosed
Garrison Engineer South Delhi Cantt 110010
Garrison Engineer South Delhi Cantt 110010
REPAIR REPLACEMENT OF CEILING FANS EXHAUST FANS GEYSERS AND CONNECTED ITEMS AT VRC 10 JAK LI DGIS CAMS 1 CBPO IHQ MOD ARMY CAMP AND MANEKSHAW CENTRE UNDER AGE E M SOUTH OF GE SOUTH DELHI CANTT10
2020_MES_330893_1
GE/DS-97/2019-20
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Garrison Engineer South Delhi Cantt 110010
As per Tender Document
9 documents required · 9 mandatory
₹500
Garrison Engineer South Delhi Cantt 110010
₹30,000
Yes
2 Jul 2020
3 Mar 2020
3 Apr 2020
3 Mar 2020
31 Mar 2020
17 Mar 2020
Amount
Taking down of ceiling fan/ exhaust fan and dismantling of blades, transportation to work shop and carrying out rewinding, transportation to site, reinstallation and testing complete all as specified and directed by Engr-in-Charge. Note:- Rewinding will be measured and paid separately.
M&L for Rewinding of ceiling fan 1200/1400 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing where ever required and applying two coat of synthetic enamal white paint first quality by using machnical spray including filling cavities with filler and marking of mes no as per existing complete all as specified and directed by Engr-in-Charge. Note:- Painting of ceiling fan will be measured and paid under this item schedule as the rate for the same is inclusive.
All same as per item No 2 above but exhaust fan 450 mm sweep complete all as specified and directed by Engr-in-Charge.
All same as per item No 2 above but exhaust fan 230/300 mm sweep complete all as specified and directed by Engr-in-Charge.
S&F in replacement of upper and lower Gun metal bush for ceiling fans of size 1200/1400 mm sweep complete all as specified and directed by Engr-in-Charge.
S&F in replacement ceiling fan Ball bearing of suitable size & model complete all as specified and directed by Engr-in-Charge. Make:- NBC/ SKF
S&F in replacement fan shaft with pin for ceiling fans of 1200/1400mm sweep complete all as specified and directed by Engr-in-Charge.
S&F in replacement clamp with rubber real for hanging ceiling fans of 1200/1400mm sweep complete all as specified and directed by Engr-in-Charge.
S&F in replacement of ceiling fan capacitor of 2.5 mfd complete all as specified and directed by Engr-in-Charge. Make : TIBCON/AE/EPCOS/Havells
S&F in replacement of fan regulator electronic, stepped type, Switch type, suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engr-in-Charge. (Make : Cona/Kinjal/SSK)
Earthing complete with galvanised earth plate electrode 60 cmx 60 cmx 6.3 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of the plate not less than 1.5M below normal ground level connected to GI wire 4mm as earthing lead by means of nut,bolts and check nut and washer,GI light grade protection pipe 15 mm dia. upto 7.5 m,GI watering pipe 20 mm dia,RCC cover with funnel,excavation in any type of soil,PCC pit charcoal ,salt all as shown in electrical plate No 3 of SSR Part I, including earth test point up to pannel board, including testing on completion, complete all as specified and directed by Engr-in-Charge.
M&L Earth continuity conductor or main earthing lead fixed on wall/ceiling in batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed on poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire complete all as specified and directed by Engr-in-Charge.
Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.
verma enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .