SPECIAL REPAIR TO ROADS NEAR BLDG NO P-06-106 AT SATWARI UNDER GE SATWARI

Amount

Repair to pot holes, exceeding 30mm depth, not exceeding 01 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, and applying evenly a priming tack coat with bituminous primer (Viscosity Grade Paving Bitumen of Grade VG-30) at the rate of 5 Kg per 10 Sqm of surface, putting in & including bituminous premix bituminous macadam and sealed with binder 9.80 Kg per 10 Sqm, laying bituminous premix asphaltic semi dense mix concrete 40 mm thick consolidated thickness with 5.5 % binder content by weight of total and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tonne power roller, complete all as specified and as directed. Note:-The minimum consolidated thickness will be 40mm. However it may be increased at places to maintain the camber as per the site requirement & contractor will visit the site before quoting their rates.

Preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Viscosity Grade Paving Bitumen of Grade VG-30) at the rate of 5 Kg per 10 Sqm of surface laying bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 5.5 % binder content by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 10 tonne power roller, complete all as specified and as directed. Note:-The minimum consolidated thickness will be 40mm. However it may be increased at places to maintain the camber as per the site requirement & contractor will visit the site before quoting their rates.

Marking lines, dashes arrows etc of any description exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint mixed with radium glass beads @ 250 gms/Sqm with automatic machine to provide reflectivity and night vision (approximate temperature being 200° Celsius at the time of laying) including cleaning the surface by removing all dirt, dust & all other foreign matters, demarcation at site and traffic control, complete all as specified & directed.

Surface dressing not exc 15 cm deep (averaging) and getting out in soft / loose soil as in side berm of roads complete all as specified & directed.

Removing excavated material (soil) to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified.

RAMESHWAR ENGINEERS AND BUILDERS

M/S CHOUDHARY BUILDERS

M/s K.S. Constructions

M/S VIJAY KUMAR SHARMA

M/S ESS ESS ENTERPRISES

Sarbat Construction Co