DAY TO DAY COMPREHENSIVE MAINT FOR MGSF UNDER GE (WEST) LUCKNOW

Amount

M & L for rendering 10mm thick in CM 1:6 on brick work or concrete surface and finishing the surface even and smooth without using extra cement incl taking down of existing plaster complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surface and finishing the surface even and fair incl taking down of existing plaster complete all as specified and directed.

Cutting chases for concealed water tubing and making good to disturbed surfaces in CM 1:3 cutting not exc 10cm in girth complete all as specified and directed.

S & F for GI tubing medium grade 15mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing & connection 15 mm bore complete all as specified and directed.

S & F for GI tubing medium grade 20mm dia galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing & connection 20 mm bore complete all as specified and directed.

M & L for Brick work with sub class ‘B’ burnt bricks straight or curved on plan exc 6m mean radius in CM 1:6 incl demolition of existing brick work complete all as specified and directed.

M & L Brick work, with sub class 'B' burnt bricks, straight or curved on plan to any radius as in half brick thick walls built in CM. 1:4 using old size brick incl demolition of existing brick work complete all as specified and directed.

M & L for Non skid (coloured) ceramic (premium) tiles 300x300x6-7mm thick in floor laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc set and jointed in neat cement slurry and pointed in white mixed with admixture cement to match tiles incl dismantling of floor ,hearth or wall tiling etc omplete all as specified and directed.

M & L for Non skid (coloured) ceramic (premium)tiles 400x400x6-7mm thick in floor including 15mm thick screed bed or bedding layer of mortar 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of floor ,hearth or wall tiling etc complete all as specified and directed.

M & L for Non skid (coloured) ceramic (premium) tiles 400x400x6-7mm thick on vertical surfaces such as skirting/dados etc laid over and including 10mm thick backing coat in CM 1:4 incl dismantling of floor ,hearth or wall tiling etc complete all as specified and directed.

M & L for vitrified (premium) tiles 10mm thick light shade square polished, area of each tiles n. exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 15mm thick screed bed in CM 1:6 incl dismantling of floor ,hearth or wall tiling etc complete all as specified and directed.

M & L for vitrified (premium) tiles 10mm thick light shade square polished, area of each tiles n. exc 0.36 sqm on vertical surfaces such as skirting/dados etc laid over and including 10mm thick backing coat in CM 1:4 incl dismantling of floor ,hearth or wall tiling etc complete all as specified and directed.

M & L for (coloured) glazed ceramic (premium) tiles 300x450 x 6-7 mm thick on vertical surfaces such as skirting/dado including 10mm thick backing coat in CM 1:4 incl dismantling of floor ,hearth or wall tiling etc complete all as specified and directed.

M & L for (coloured) glazed ceramic tiles 600x300x 7 mm thick but as on vertical surfaces such as skirting/dado including 10mm thick backing coat in CM 1:4 incl dismantling of floor ,hearth or wall tiling etc complete all as specified and directed.

M & L for machine cut Kota stone slab flooring 18-20mm thick laid over and including 20mm thick laid and incl screed bed in CM 1:6 and jointed with grey cement slurry and pointed with grey cement & pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

M & L for machine cut Kota stone slab 18-20mm thick as in risers to steps, skirting, dado pillar laid over and including 10mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry and pointed with mixture of grey cement and pigment to match the shade of the slab incl rubbing and polishing complete all as specified and directed.

M & L for 40mm thick PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in floors and finishing the surface even and smooth using extra cement incl demolition of existing PCC complete all as specified and directed.

Supply only Glass dividing strips 3mm thick and 38mm wide inserted in position complete all as specified and directed.

S&F in repair bib taps (ISI Marked) 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.

S & F in repair for CP Pillar taps (ISI Marked) fancy type15mm brass with capsten head chromium plated, screwed down high pressure with or without lettered "hot or cold" water long screwed both ends for iron pipe complete all as specified and directed.

S & F in repair CP brass stop/angle valves (ISI marked) 15mm bore fancy type chromium plated with quarter turn handle and wall flange complete all as specified and directed.

S & F in repair for 15mm bore CP central hole basin mixer (ISI Marked) for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F in repair Single lever Wall mixer (ISI Marked) 3 in 1 system with provision of both hand shower and over head shower complete with 115mm long bend pipe on upper side connecting legs and wall flanges (without hand and over head shower) including all fittings and fixed complete all as specified and directed.

S & F in repair Overhead shower 200 x 200mm square shape single flow (ABS body chromium) plated with grey face plate) with rubit cleaning system including shower arm 450mm long including all fittings and fixed complete all as specified and directed.

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified and directed.

S & F in repair Glass corner self, fancy type, 300x300 and 8mm thick fixed with brass bracket and screwed complete all as specified and directed.

S & F in repair Sheet glass shelf assembly consisting of 8mm thick sheet glass shelf 12cm wide with chromium plated bracket, guard and railing 60cm long complete all as specified and directed.

S & F in repair 15mm bore concealed stop valves (ISI Marked) brass, chromium plated long shank, with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair 20mm bore gate valves (ISI Marked)with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair 15mm bore gate valves (ISI Marked) with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repair Bib taps 15mm standard of PTMT any colour, high presure, screwed for iron pipe and fixed (Min wt-15mm-90gms) complete all as specified and directed.

S & F in repair Pillar taps 15 mm standard of PTMT any colour, high presure, screwed for iron pipe and fixed (Min wt-15mm-110gms) complete all as specified and directed.

S & F in repair stop valves 15mm standard of PTMT any colour, high presure, screwed for iron pipe and fixed (Min wt-15mm-90gms) complete all as specified and directed.

S & F in repair Brass chromium plated bottle traps (ISI marked) for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed of 32mm complete all as specified and directed.

S & F in repair Brass spindle for Bib cock/stop cock complete all as specified and directed.

S & F in repair Brass spindle for Bib cock/stop cock/WHB Mixture/Wall Mixture complete all as specified and directed.

S & F in repair Brass spindle for concealed stop cock complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10ltrs capacity, syphonic action type, white with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polythelene of low or high density complete all as specified and directed.

S & F in repair PVC Syphon Kit with complete fittings for low level flushing cistern complete all as specified and directed.

S & F in repairs PVC connection pipe 15mm bore with PTMT nuts of 600mm long complete all as specified and directed.

S & F in repairs swivel CP shower rose with long arm 125 mm dia complete all as specified and directed.

S & F in repairs WHB vitreous china, white, flat back, size 550x400mm incl brackets, waste coupling and waste pipe complete all as specified and directed.

S & F in repair vitreous china Water closet pedestal pattern with seat cover white and flushing pipe 32mm dia for low level flushing cistern (fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti -syphonage pipe, etc complete all as specified and directed.

S & F in repair vitreous china squatting pan Orissa pattern long pan of size 580 x 440mm with CI trap long neck 100mm with integral foot rest & fixing incl making good floor to match complete all as specified and directed.

S & F in repair jet spray with PVC pipe of superior quality complete all as specified and directed.

S & F in repair waste pipe 32mm for WHB & sink complete all as specified and directed.

S & F in repair grating doom 100mm dia of PTMT (min wt-25gms) complete all as specified and directed.

S & F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repair kitchen sink with drainage board made out of 1.0 mm thick stainless steel with plug washer waste coupling waste pipe incl connection to union and drain pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repair stainless steel kitchen plate rack made out of 1mm thick stainless steel sheet of size 900mm x 600mm x 250mm of approved pattern complete all as specified and directed.

S & F in repair PVC coloured bath cabinet overall size 560 x 410mm decorative design with looking mirror including all fittings complete all as specified and directed.

Dismantling water tanks of capacity exc 250 & n. exc 500 ltr and S & F 500 ltrs capacity rotational moulded polyethylene water storage tanks in triple layer (ISI Marked) (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed.

Dismantling water tanks of capacity exc 500 & n. exc 1000 ltr and S & F 1000 ltrs capacity rotational moulded polyethylene water storage tank (ISI Marked) (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed.

S & F in repair PVC tank cover with locking arrangement for 500 / 1000 ltrs water tank complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltrs etc complete all as specified and directed.

Cleaning and removing all scale and dirt,etc,from tanks and from mouths of circulating pipes exc 500 & n exc 1000 ltrs etc complete all as specified and directed.

S & F in repair 20mm dia ball valve high pressure, of PTMT with epoxy coated aluminium rod & high density plastic ball & fixed complete all as specified and directed.

Taking down eaves gutters and rain water pipes any size or pattern including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed.

S & F 110mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F 75mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F PVC(SWR) bends 110mm dia complete all as specified and directed.

S & F PVC(SWR) bends 75 mm dia complete all as specified and directed.

S & F in repair Rubber beading size 50x5mm for doors complete all as specified and directed.

S & F in repairs CP tubular towel rod, 20mm dia, "D" type(ISI Marked), 60cm long between flange complete all as specified and directed.

S & F in repair Flush Handle for any respective pattern for low level flushing cistern any description complete all as specified and directed.

S & F in repair 32 mm bore Brass chromium plated Waste coupling for wash basin with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repair 40 mm bore Brass chromium plated Waste coupling for kitchen sink with inlet and outlet screwed for pipe or connections includding necessary packing, union and cap and fixed complete all as specified and directed.

S & F in repair steel Soap dish CP any size complete all as specified and directed.

Opening of air lock/blockage in GI pipe line from outlet of water tank to all internal GI pipes fittings to smooth flow of water from BIB TAPS/shower/WHB pillar tap/Stop valves complete by Air pressure/water gravity pressure etc. complete all as specified & directed.

S & F 18/19 mm thick BWR plywood interior grade both side with commercial face fixed with screwed to timber frame work edge chamfered as directed by Engineer-in-Charge complete all as specified and directed.

S & F 0.9 mm thick Decorative laminate (Mica) type 1 (ISI Marked) of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas directed by Engineer-in-Charge complete all as specified and directed.

S & F 19mm thick factory made 100% solid PVC flush shutter (ISI Marked) made from co-extruded three layer rigid foam sheet (Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400 kg/cum and density of central core not less than 600 Kg/cum, manufacturer by an ISO 9001/2015 certified company all as specified and directed.

S & F Auto concealed Hinges SS size 103mm64mmx28mm suitable for cabinet and wardrobe complete all as specified and directed.

S & F 100mm size aluminium handle fabricated type anodised complete all as specified and directed.

S & F 100mm size aluminium anodised hasp and staple, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F magnet catcher 50 mm size for kitchen cup board shutter complete all as specified and as directed.

S&F Continuous (piano) hinges width of flange (whene open) 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and directed

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S & F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

M & L 18-20mm thick polished granite work bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including polishing and bull nosing exposed edges complete over and including 20mm thick screed bed or bedding layer of CM 1:4 including dismantling of stone slab and tiles of any description etc,complete all as specified and directed.

S & F in repair 25mm dia fancy type drapery curtain rod made of stainless steel including knobs (Latto) and side brackets complete all as specified and directed.

S & F in repair galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S & F in repair Hasp and staple of size 100mm made out of mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directed.

S & F in repair Aluminium floor door stopper two lagged and tongue with hard drawn steel spring fixed to floor 140mm complete all as specified and directed.

S & F in repair 300mm mild steel ordinary rat tail rod pattern springs including roller or roller plate complete all as specified and directed.

S & F in repair 3mm thick plain sheet glass ordinary quality incl glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F in repair 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified and directed.

S & F in repair 150mm size aluminium handle, fabricated type anodised, ISI marked complete all as specified and directed.

S & F in repair 200mm aluminium anodized barrel tower bolts of extruded section all as specified and directed.

S & F in repair butt hinges, 100mm mild steel hinges medium weight and fixed complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement complete and making expansion joints and filling with sealing compound grade 'A' incl demolition of existing PCC complete all as specified and directed.

Material and labour for complete removal of existing treatment on wall including preparation of old plastered surface of walls by washing rubbing and applying two coat of plastic emulsion paint over a coat of primer and incl one coats of 1mm thick birla wall care putty complete all as specified and directed.

M & L for preparation of old treated surface of wall and applying one coat of plastic emulsion complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L for preparation newly plastered surface of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M & L for prepration of old treated surface of wall and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed.

M & L for preparation old treated surface of wall and applying one coats of cement base paint complete all as specified and directed.

M & L for preparation of old treated surface of wall and applying one coat of oil bound distemper complete all as specified and directed.

M & L for preparation of old treated surface of wall and applying two coat of oil bound distemper complete all as specified and directed.

M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed.

M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamelled paint complete all as specified and directed.

Taking down carefully old unserviceble existing wiring for circuit of light, fan, and socket/ sub main of copper/ aluminium for taking credit of retrieved material and making good disturbed surfaces of walls, floors complete all as specified and directed.

M&L in repair for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.5 sqmm nominal cross sectional area single core drawn into existing conduit, including pressed steel concealed terminal switch boxes not less than 1.5 mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.5 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed by Engr-in-charge. (a) One light/Fan point controlled by one, one way 5 Amp, one switch.

All as per Item No 107 above but one bell/ buzzer point controlled by one bell push complete all as specified and as directed.

All as per Item No 107 above but one 5 pin 5 Amp socket outlet point on same board complete all as specified and as directed.

All as per Item No 107 above but one 5 pin 5 Amp socket outlet point on an independent board complete all as specified and as directed.

All as per Item No 107 above but for one 6 pin 15/16 Amp socket outlet point on an independent board with cables of size 2.5 sqmm and one green colour earth cable of size 2.5 sqmm complete all as specified and as directed.

S&F switch piano flush button single pole one way 6 Amp 240 volt complete all as specified and as directed.

S&F switch piano flush button single pole one way 16 Amps 240 volt complete all as specified and as directed.

S&F socket outlet flush type 16 Amp, 230 volts complete all as specified and as directed.

S&F socket outlet flush type 5 pin 6 Amps 240 volts complete all as specified and as directed.

S&F ceiling rose surface bakelite three terminal complete all as specified and as directed.

S&F bell push single pole one way 5 Amp, 240 volt fuesh type complete all as specified and as directed.

S&F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed.

S&F fan regulator electronic step type for ceiling fan fixed, in existing board and connecting as directed, after dismantling and removing unserviceable regulator complete all as specified and as directed.

S&F in replacement switch piano flush button single pole one way 6 Amp 240 volt complete all as specified and as directed.

S&F in replacement switch piano flush button single pole two way 6 Amp 240 volt complete all as specified and as directed.

S&F in replacement switch piano flush button single pole one way 16 Amps 240 volt complete all as specified and as directed.

S&F in replacement socket outlet flush type multipurpose 2 in 1, 3 pin 6 and 16 Amp, 230 volts complete all as specified and as directed.

S&F in replacement socket outlet flush type 5 pin 6 Amps 240 volts complete all as specified and as directed.

S&F in replacement ceiling rose surface bakelite three terminal complete all as specified and as directed.

S&F in replacement bell push single pole one way 5 Amp, 240 volt fuesh type complete all as specified and as directed.

S&F in replacement angle type holder insulated body with back plate suitable for batten fittings complete all as specified and as directed.

S&F in replacement fan regulator electronic step type for ceiling fan fixed, in existing board and connecting as directed, after dismantling and removing unserviceable regulator complete all as specified and as directed.

S&F in replacement call bell AC single pole 240 volt ding dong Type complete all as specified and as directed.

S&F in replacement Modular switches 1 way 6A,1 module complete all as specified and as directed.

S&F in replacement Modular switches 1 way 16A,1 module complete all as specified and as directed.

S&F in replacement Modular switches 2 way 6A,1 module complete all as specified and as directed.

S&F in replacement Modular bell push single pole one way 6Amp,240 volt,1 module,fuesh type complete all as specified and as directed.

S&F in replacement Modular 6 A sockets-5 pin 2 module complete all as specified and as directed.

S&F in replacement Modular 6A/16A sockets-3/5 pin combine 2 module complete all as specified and as directed.

S&F in replacement Modular fan regulator 120/100 W, 2 Module for ceiling fan fixed, in board and connecting as directed, after dismantling and removing unserviceable regulator.

S&F in replacement Modular white cover plate with frame 8 module complete all as specified and as directed.

S&F in replacement Modular white cover plate with frame 6 module complete all as specified and as directed.

S&F in replacement Modular white cover plate with frame 4 module complete all as specified and as directed.

S&F in replacement Modular white cover plate with frame 3 module complete all as specified and as directed.

S&F Modular white cover plate with frame 2 module complete all as specified and as directed.

S&F in replacement for 1.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed.

S&F in replacement for 2.5 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed.

S&F in replacement for 4.0 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed.

S&F in replacement for 6.0 sqmm single core copper,multistandard PVC insulated (FRLS) unsheathed, cable 1100 volts grade complete all as specified and directed.

S&F in replacement bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 and IK 08 protection cover suitable for bulk head fitting integrated type 10/7W LED, 6500K , 100 lumens/watt including inbuilt electronic driver complete all as specified and as directed.

S&F in replacement wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 8/10 W, 6500 K, 230V , minimum 120 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrngements complete all as specified and as directed.

S&F in replacement wall/surface mounting luminaires integrated LED Batten 16/20 W, 6500 K,120 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours, 2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and as directed.

S&F in replacement Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, ( B-22/E27 base), with 01 No. 7/9 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements complete all as specified and as directed.

S&F in replacement LED Building security light 20/25 Watt with high power LED source (>100 lumen/watt) PDC housing, IP66 and IK 07 with 4 KV inbuilt surge protection ,minimum 50000 burning hours hv cutoff@325/440 volt protection for 8 hours including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and as directed.

S&F in replacement LED Bulb lamp 7/ 9 Watt in repairs of existing lamp any type and size complete all as specified and as directed.

S&F in replacement in repair FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS downrod suspended type with fitting arrangement including neccessary elect connection from ceiling rose to luminaries with suitable size PVC cord complete all as specified and as directed.

S&F in replacement Material glass led tube ,voltage range 220-240v-50hz ,cct 6500k,lumen ,wattage 16/20 W surge 2.5kv ,CRI 80 POWER FACTOR >_0.9 ,BURING HOURS 25K HOURS 120 L/W ,6000 K with high efficency, with neccessary electrical connection incl disconnection old elecronic ballast if any complete all as specified and as directed.

S&F in replacement three core PVC insulated FRLSH sheathed cable with 1.5 sqmm stranded copper conductor complete all as specified and as directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, triple pole and neutral 4 way 415Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and as directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and as directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 8 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and as directed.

S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 4 way 240 Volts with 100/125 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and as directed.

S&F in replacement MCB, single pole 6 to 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and as directed.

S&F in replacement MCB, single pole & neutral 32/40 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and as directed.

S&F in replacement MCB, triple pole & neutral 40 to 100 Amp, 415 volts, 10 KA breaking capacity, 'C' curve complete all as specified and as directed.

S&F in replacement Modular type AC box with socket plug top and MCBs with two pin and one pin for earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed.

S&Fin replacement double door VTPN 4 way double door suitable for 4 pole MCCB 125A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and as directed.

S&F in replacement MCCB 125 Amps 415 volts, 4 pole 16 KA breaking capacity complete all as specified and as directed.

Supply and fixing in replacement PVC casing and caping, 20mm wide complete all as specified and as directed.

M&L in replacement for Submain wiring with two single core PVC insulated cable with 4.0 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4.0 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20 mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls/ceiling complete all as specified and as directed. Note - PVC Conduit and accessories shall be deemed to be included in the quoted rate

S&F in replacement 5A PVC gang box fitted with 5A switch socket combination, 230 Volts complete with pvc gitties and screws complete all as specified and as directed.

S&F in replacement 15A PVC gang box fitted with 15A switch socket combination, 230 Volts complete with pvc gitties and screws complete all as specified and as directed.

S&F in replacement rectangular laminated hylum sheet top cover for switch sockets of size' (125mmx125mmx3mm) complete all as specified and as directed.

Same as item 168 here in before but (200mmx125mmx3mm) complete all as specified and as directed.

Same as item 168 here in before but (225mmx275mmx3mm) complete all as specified and as directed.

Taking down and refixing and Comprehensive repair/maintenance of storage type electric water heater (geyser) of capacity 25/50 litres, vertical or horizontal type comprising of the following: (a) Opening or dismantling the storage tank, taking down, de-scaling, brushing and thoroughly cleaning. (b) checking of all stop cock, pressure release valves, fusible plugs for its serviceability etc. in situ to ensure proper functioning of parts including supply and replacing of washers/ gasket nut etc. (c) Checking and rectify earth continuity of the Electrical circuits of Geyser and power point. (d) Checking and re-fixing thermostat and re-adjust. (e) De-scaling the immersion type heating element and siphon assembly with diluted Hydrochloric acid or clear pedette solution. (f) Checking of indicator lamp for it proper serviceability. (g) Re-assembling the Geyser and re-install at same position and testing complete all as specified and directed. NOTE: Unserviceable Parts/ components of electric water heater shall be replaced by the contractor. (ii) Supply and fixing of new parts/components shall be measured and paid separately under respective item of schedule.

S&F in replacement thermostat of Type EST 11/20A, 240 Volt of ISI marked approved make complete all as specified and as directed.

S&F in replacement thermostat of Type EST 7/15A, 240 Volt of ISI marked approved make complete all as specified and directed.

S&F in replacement heating element of capacity 1.5/2 KW, AC 240 volts, suitable for storage type electric water heater as per requirement (press type/ screw type/ triangular/ circular base or ceramic cartrige type), ISI marked complete all as specified and directed.

S&F in replacement copper syphon (door) assembly suitable for geyser of capacity 25 litres of any type as required complete with inlet and outlet and provision for thermostat pipe with drain pipes with drain plug, screws, studs, clamps for fixing heating elements etc. including gasket complete all as specified and as directed.

S&F in replacement polycorbonate 3-pin, 16 amps Plug top, white complete all as specified and directed.

S&Fin replacement indicating LED lamp, Neon type, 240 volt AC suitable for 25/50 ltrs capacity geysers complete all as specified and directed.

S&F in replacement safety valve suitable for 25/50 litres capacity geyser complete all as specified and directed.

S&F in replacement sheet metal enclosures, single pole with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

M&L for tracing and arresting of leakage in storage tank of 25/50 ltrs capacity geyser by brazing and soldering at leakage point and testing on completion complete all as specified and as directed.

S&F in replacement 450 mm long steel hose connection with brass adopter nut suitable for 15mm bore pipe and suitable for hot water and Cold Water Supply and fixed complete all as specified and as directed.

S&F in replacement non return valve of cast copper alloy suitable for 15 mm bore pipe and fixed complete all as specified and as directed.

S&F in replacement stainless steel inner tank of capacity 25/50 litres geyser, vertical or horizontal type of any make complete all as specified and as directed.

Taking down carefully and comprehensive maintenance of ceiling fan/Exhaust fan of any size/sweep, after disconnecting all electrical connection, detaching the blades, removing fan with blades to workshop, opening and cleaning of fan, segregation of unserviceable parts, replacement of unserviceable spares parts with new parts including necessary machining work and lubricating with approved grade of grease and necessary minor soldering work (if required) and re-assembling the fan complete and testing and refixing the fan in same position including all electrical connection and provn of replacement of two nos split pins, one connection block and one rubber reel complete all as specified and as directed. NOTE: (i) Rewinding work of armature (if any) shall be measured and paid separately. (ii) Replacement of new spare parts with old unserviceable parts other than connector, split pins, connection block, canopy and rubber reel shall be measured and paid separately under respective item of schedule.

M&L for taking out and removing burnt copper winding, cleaning the armature, rewinding the fan armature for ceiling/exhaust/others type fan of any size/sweep with new super enamelled copper wire of existing gauge including provn of necessary insulating materials etc and varnishing with approved grade of insulation varnish and heating up and testing complete all as specified and as directed. Note: The ceiling fan winding work will be done in AGE E/M Yard.

S&F in replacement new metal bush made out of Gun metal/ Brass of same size suitable for ceiling fan, wall mounted fan and exhaust fan complete all as specified and as directed.

S&F in replacement roter shaft of ceiling fan, exhaust fan, wall fan of any capacity, make and type complete all as specified and as directed.

S&F in replacement ball bearings No. 6201 and 6202 suitable for fan complete all as specified and as directed.

S&Fin replacement ball bearings No. 6203 and 6204 suitable for fan complete all as specified and as directed.

S&F in replacement capacitor 1.5 Mfd, 230 Volts, 50Hz complete all as specified and as directed.

S&F in replacement capacitor 2.5 Mfd, 230 Volts, 50Hz complete all as specified and as directed.

Rectifying complaints of blockage of bathroom / kitchen / WHB / urinals / WCs etc of any pattern and make it fully functional. The blockage shall be cleared all as specified and directed. Note:- (a) The contractor shall provide adequate labours and tools to rectify the complaints. (b) The sludge obtained during rectifying the complaints shall be disposed off beyond the periphery of defence land. (c) Penalties for delay will be applicable as per Particular Specification.

Rectifying complaints blockage of manholes depth not exc 1.00 mtr incl removing all sludge as specified and directed. Note:- (a) The contractor shall provide adequate labours and tools to rectify the complaints. (b) The sludge obtained during rectifying the complaints shall be disposed off beyond the periphery of defence land. (c) Penalties for delay will be applicable as per Particular Specification.

Rectifying complaints blockage of manholes depth exc 1.00 mtr but not exc 1.50 mtr incl removing all sludge as specified and directed Note:- (a) The contractor shall provide adequate labours and tools to rectify the complaints. (b) The sludge obtained during rectifying the complaints shall be disposed off beyond the periphery of defence land. (c) Penalties for delay will be applicable as per Particular Specification.

Rectifying complaints of blockage of sewage lines 100 mm dia of any length & depth and make it fully functional all as specified and directed.

Rectifying complaints of blockage of sewage lines 150 mm dia of any length & depth and make it fully functional all as specified and directed.

Cleaning of soak well using mechanical pumps diesel driven with fuel, operator and necessary excavation on half buried night soil and disposed off soak well water etc in pits including necessary excavation and earth work for pits for burrying the night soil etc in soft/loose soil complete all as specified and directed.

Cleaning/disludging of existing septic tank of any capacity/sump well of any dia and depth incl taking out sludge in any form and other foreign matter etc viz sediment, sand, ash, grease, fibre, silt, roots or vegetation etc means of sewage sucking machine or by way of any other suitable means and removing the sludge outside MD land by any means complete all as specified and as directed. Note: The sludge/burried soil etc taken out shall be stacked alongwith the septic tank, sump well etc. After 48 hours of the sludge taken out, measurement shall be taken as of the solid contents for the purpose of payment. The tenderer are advised take up this aspect in mind while quotating the rates. After taking measurements, the solid contents shall be disposed off outside the MD land/area

M&L in repair for Providing factory made cover full floor medium duty weight Square/rectangular (size 500mm x 900mm) thickness not less than 75mm set in CM 1:6, as in cover slabs (for manhole, drains etc) with plain fair faces, with angle iron frame all round complete all as specified and as directed

M&L for providing precast RCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone agg as in cover slab for man holes, drains, soak well etc and similar articles etc, set in CM 1:4 with plain faces including chamfered weathering throating etc incl necessary form work and including demolition of old reinforced concrete of any description in any postion not otherwise specifically provided far complete all as specified and directed.

S&F for mild steel deformed bars or TMT bars 6 mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S & F of CI spun Hubless Pipes 100 mm bore single socketed in any length socketed in any length in trenches or in floors with shield coupling SS (304) with EPDM rubber gasket but fixed to walls including taking down old pipe complete all as specified and as directed

S & F of CI spun Hubless bends any radius 100 mm size complete all as specified and directed.

M & L of repair 100 mm dia CI any type of trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as speciifed and directed.

S & F in repair of 100mm bore pipe stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays or hold fast(brass/ stainless steel), including bolts and nuts and securing ends of stays to wall or roof any type complete all as specified and directed.

S & F of 75mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection surface finished fair and even without using etra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6mm wide and 10mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and as directed

S & F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenchers or in floors complete all as specified and directed.

S & F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenchers or in floors complete all as specified and directed.

S & F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and fixed to walls complete all as specified and directed.

S & F PVC (SWR) bends 110mm dia complete all as specified and directed.

S & F PVC (SWR) bends 75mm dia complete all as specified and directed.

S & F in repair 75mm diameter of outlet PVC (SWR) floor trap, plain with grating including joints with solvent complete all as specified and directed.

R K CONTRACTOR AND SUPPLIERS (BID ID -3270288)

M/s Bhadoria Associates (BID ID -3270283)

Manoj Electricals (BID ID -3270174)

BAJAJ CONSTRUCTION (BID ID -3270203)

HS ASSOCIATES (BID ID -3270326)

m/s pal associates (BID ID -3270977)

M/s Chandra Mohan and Sons (BID ID -3274632)