Interior Works of Sewa Bhawan Building at Diu (2nd Call).

Amount

Works

Furniture Work : Suspended Gypsum Board Ceiling : Providing & fixing of suspended ceiling, which includes Gypsteel ultra CRPsurface ribbed perimeter channels of size 0.55 mm thk. (having one flange of 20mm & another flange of 30mm and a web of 27mm ) along with perimeter of ceiling, screw fixed to brick wall /partition with the help of nylon sleeves and screws, at 610mm centres then suspending Gypsteel Ultra CRP surface ribbed intermidiate channels of size 45 mm (0.9 mm th with two flange of 15mm each) from the soffit at 1220mm centres with gypsteel ultra CRPsurface ribbed ceiling angle of width 25mm x10mm x 0.55mm thick fixed to soffit with GI cleat and steel expansion fasteners (mfg by Saint Gobain India Gypsum) then Gypsteel ultra ceiling section of 0.55 mm th. having knurled web of 51.5 mm and two flange of 26 mm each with lips of 10.5 mm are then fixed to the Gypsteel ultra intermediate channel with the help of connecting clip and in direction prependicular to the Gypsteel ultra intermediate channel at 457.5 mm centres single layer of 12.5mm tapered edge Gypboard (conforming to is 2095 part 11996) is then screw fixed to ceiling section with 25mm drywall screws at either with screw driver or drilling machine with suitable attachment.(Cost including For suspended from RCC Ceiling /Roof , light cutting gala & also including Scaffolding & Working Plateform for any height))

Armstrong grid ceiling : Providing and fixing Classic Lite RH 99 (Silhautte grid) 16mm false ceiling system manufactured by Armstrong using hot dipped galvanized steel section, rotary stitched main tee of size 15mm x 45 mm web height, having 0.36 mm gauge at every 600 mm centre to centre maximum and rotary stitched cross tee of size 15 mm x 45 mm, having 0.33 mm gauge at every 600 mm. c/c. and wall angle of size 19 x 19 mm., having 0.35 mm gauge fixed to the periphery of the wall. The above grid is suspended at every 600mm c/c. in both directions using 2.0 mm. thick pre-straightened GI wire laying CLASSIC LITE RH 99 ceiling tiles with Silhautte grid manufactured by Armstrong , having Humidity Resistance of 99%, RH and size 600mmx600mmx16mm over the formed grid complete. including light fixtures cutting gala in ceiling.(Cost including For suspended from RCC Ceiling /Roof light cutting gala & also including Scaffolding & Working Plateform for any height)

Armstrong techzone ceiling : Providing and fixing Armstrong Techzone Ceiling (Silhautte grid) 16mm false ceiling system manufactured by Armstrong using hot dipped galvanized steel section, rotary stitched main tee of size 15mm x 45 mm web height, having 0.36 mm gauge at every 600 mm centre to centre maximum and rotary stitched cross tee of size 15 mm x 45 mm, having 0.33 mm gauge at every 600 mm. c/c. and wall angle of size 19 x 19 mm., having 0.35 mm gauge fixed to the periphery of the wall. The above grid is suspended at every 600mm c/c. in both directions using 2.0 mm. thick pre-straightened GI wire laying ("Techzone Ultima " 6'' X 48'') 600mm x 1200mm ceiling tiles with Silhautte grid manufactured by Armstrong , having Humidity Resistance of 99%, RH and size 600mmx1200mmx16mm over the formed grid complete.(Cost including For suspend1mtr.from RCC Ceiling /Roof with required MS Support, light cutting gala & also including Scaffolding & Working Plateform for any height)

Baffle Ceiling : Providing and fixing vertical linear baffle ceiling made from Aluminium Extrusion in Aluminium alloy grade 6063. The baffle blade shall be in an extruded aluminium box section with 125mm c/c spacing and making clear space of 100mm between two aluminium box sections

Wooden Ceiling (laminate finish) : providing & fixing wooden ceiling with aluminium frame of 50mm X 38mm with 12mm thick, ply clading with 4mm, MDF with 10mm, laminate finish with polish

Wooden Ceiling (veneer finish) : Providing & fixing wooden ceiling with aluminium frame of 50mm X 38mm with 12mm thick, ply clading with 4mm, MDF with 10mm, veneer finish with polish

Full Ht Wooden Partition : Providing & fixing of full height (3600mm ht) wooden Partition using Aluminum tube frame work shall comprise of 50 mm x 25 mm Aluminum tube (Medium Gauge, Jindal Make) members at regular distance of 600 mm c/c both ways and both side covered with 8 mm th specified Ply & also one more layer of 4 mm specified MDF on both side of partition for groove pattern with raw plywood finished as shown in the drg with necessary hardware.etc .

Full Height Glass Partition (10mm Toughen Glass) : Providing & fixing 10mm thk.Toughned Glass Partitionup to 3000mm ht Made from 10mm Toughned Glass fixed with readymade modular Slim section of Size 25mm x 45mm x 2.5mm thk poweder coated as shown in the drg.& design or as directed by Engg. In charge. including necessary hardware. filling of sealant etc.(Quantity measured only elevated part at bottom of lintel level & Door Opening deduct but Aluminium door frame will be included in partition Qty, Door will be measured and paid separately)

Gypsum Solid Partition : Providing & fixing of 75mm th.Gypsum Solid Partition (As per required & suggested Area) above False ceiling to Slab Bottom Bottom level using Partition member at 600mm x 600mm partition which includes one layer of tapered edge 13mm thick (both side of partition) Gypsum board screw fixed with drywall screws of 25mm at 300mm c/c to as per above Specs, complete as shown in the drawing & design or as directed by Engg-in-charge.

Laminated Plywood Paneling (12mm ply+4mm mdf thick) : Providing & fixing Wall paneling to consist of 12 mm th plywood finished with 4mm thk.mdf & 1mm Laminate with required frame work with teakwood beading patty or 12 mm plywood backing grove pattern at wall surfaces, Partition edge as per required & suggested Area. including groove polish with

Laminated Plywood Paneling ( 19mm ply + 4mm mdf thick) : Providing & fixing Wall paneling to consist of 19 mm th plywood finished with 1mm Laminate with required frame work with teak wood beading patty or 19 mm plywood backing grove pattern at wall surfaces, Partition edge as per required & suggested Area.including groove polish with

Plywood Paneling ( 12mm ply ) : Providing & fixing un finished plywood paneling to consist of 12mm th plywood with required ply wood frame work with paint finish & border seal to teak wood beading patty on edge at wall surfaces,as per required & suggested Area.with All Necessary hard ware, etc.

Plywood Panelling ( 19mm ply ) : Providing & fixing un finished plywood paneling to consist of 19mm th plywood with required ply wood frame work with paint finish & border seal to teak wood beading patty on edge at wall surfaces,as per required & suggested Area.with All Necessary hard ware, etc.

Laminated Cladding with 4mm mdf on Partition Surfaces : Providing & fixing Wall paneling to consist of 4mm mdf +1mm Laminate on ready surface of partition with required Beading Patti, grove pattern at partition surfaces,as per required & suggested Area.

Acoustic Paneling : Providing & fixing of acoustic board of 8mm thick , Complete as per detail drawing & directed by the Architect or Engineer incharge.

Back Painted Glass Paneling (8mm thk Back Painted Glass) : Providing & fixing of non reflective 8mm th. Toughened Glass board (white back Painted) with Required frame work / 12mm plywood Backing/ Beading as per detail & fixing with adhesive with duster set.

Graphic on wall : Providing and fixing Printed Vinyl with Lamination graphic design, 3M Make complete as per suggestion of Architect/Client. If in case any application finishing will not as per satisfaction contractor shall remove all film at their cost. Contractor shall do a sample mock of 5 Sqm minimum of glass film) , Design shall be approved from Architect/Client.

Leather panelling : Providing & fixing artificial leather cladding over wooden partition/panelling with Gripper & U-form

Fabric Paneling : Providing & fixing of fabric paneling on backing of u form sheet with 12 mm MDF paneling with required frame work as per drawing , Complete as per detail drawing & directed by the Architect or Engineer incharge.

Low HT. storage Laminated finish : Providing & fixing Required in ht. & 450mm deep storage cabinet made from 18mm th. Specified ply wood finished with 1 mm th laminate from all outside surfaces & in side storage made frome 19mm Pre lame ply & Shutter operated on auto closing hinges, 19mm th prelam ply to be providing for self as per detail & having vertical 100mm wide18mm th band for supporting files. Storage will have individual locking arrangement & necessary hardware like SSmat finish handles/ ball catch. Complete as shown in the drg. & Design or as directed by Engg-in-charg.

Full Ht. Storage Cabinet Laminated Finish : Providing & fixing Full Height 450mm deep storage cabinet made from 18mm th. Specified ply wood finished with 1 mm th laminate from all outside surfaces & in side storage made frome 19mm Pre lame ply & Shutter operated on auto closing hinges, 19mm th prelam ply to be providing for self as per detail & having vertical member for supporting & Storage will have individual locking arrangement & necessary hardware like SSmat finish handles/ ball catch. Complete as shown in the drg. & Design or as directed by Engg-in-charg.

12mm Toughned Glass Door ( Single Shutter ) : Providing & fixing 12 mm thk.Toughned Glass door with edge polished fixing with first quality patch fitting double action floor springs on shutter at bottom efficient Dorma Make fixed into floor (including cutting for floor and repairing afterwards), with two pairs of 600 mm long 25 mm dia matt finished SS handles, two pair of concealed shoot bolts 250 mm long and pin type narrow style lock,on shutter with all necessary hardware. complete as per the drawing & design or as directed Engg-in charge. including Dorma Make Floor Spring

Laminated Flush Door ( Single Shutter With Door Closer) : Providing & Fixing of Single shutter Laminated Flush door Made from 35mm th Flush door as per drawing with 1mm thk laminate on both sidewith required beading for edge seal with polish, & laminated door Jambs line & Shutter to be fixed in door frame (76mmx 63mm TW) with 4 nos heavy duty hinges of approved brand with Approved SS matt finished 600mm long 25 mm dia handle on both side of door ,mortice type locking system with necessary hardware like door stoper, Dorma make Door closer, etc. Complete as per design.

Wooden Pelmet (Paint Finish) : Providing & fixing of wooden Pelmet made from 19 mm th. commercial Plywood with 6mm thk MDF finished in plastic paint with required Frame work for Support for fixing work & finished with Paint as per detail, minimum size of 200mm deep x 400mm Ht. & length as per site condition Complete as shown in the drawing & design with all necessary hardware & as directed by Engg-in-charge.

Vertical blinds (50% of Total Area) : Providing and Fixing of 100 mm thick Vertical blinds with Dust guard coated fabric complete in all respects to the entire satisfaction of the Engineer-in Charge.

Zebra blinds ( 25 % of Total Area) : Providing and fixing Sheer Dimout Blinds Blackout (Zebra blinds) construction100% Polyester fabric weight 197 GSM with repeated fabric size:Solid11.5cm/Mesh 7.5cm fabric is fixed on Anodized extruded grooved tube size 40mm O.D, the control unit is made of high strength reinforced plastic with a clutch of wrap spring design and high carbonsteel spring design . The control unit and idler should be mounted in in cassette type powder coated Headrail (As per approved sample to the entire satisfaction of Engineer-in-Charge)

Blackout Blind ( 25 % of Total Area) : Providing and fixing Roller blinds 100% Blackout , construction 3 ply PVC and1 ply Glass fibre fabric thickness 0.36 mm and weight +-520 GSM, Fire resistance NFPA 701, AATCC 16-2003 4.5 and Green guard certified with Anti fungal and Anti bacterial fabric The control unit is made of high strength reinforced plastic with a clutch of wrap spring design and high carbon steel spring design provided to transmit motion from driving to driven members of clutch The control unit and idler should be mounted on powder coated aluminium Headrail with M.S bracket to keep the fabric in Tension and straight (As per approved sample to the entire satisfaction of Engineer-in-Charge)

Plastic Paint : Providing & applying 3 coats of 1st quality Plastic paint of approved shade with two coats of putty, two coats of approved primer, and three coats of approved plastic paint, including preparation of surface, scrapping, sand papering, scaffolding, all materials and labour, taxes etc complete. as approved by Engg.-in-Charge/ Designer Putty should be of asian, Paint should be Low Volatile Organic Compound level as per standered Applicable (24.14 to 55.62 Gr/Ltr) done as per directed by engineer in charge.(rate also including Scaffolding & Working Plateform for any height)

False flooring HUB room : Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panelssupported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of: (a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge. (c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 11.54.2 - 450 mm Finished Floor Height (FFH).

Signage and Pictogrames : Providing & Installing Pictogrames & Signages for Locating the area as per design & drawings to the entire satisfaction of Engineer-in-Charge.

Granite Top Pantry Platform (including Platform Shutters) : Providing and Fixing 600 mm wide Pre polished 16mm to 18mm mm thick. 1st quality Black Granite slab. Counter to be made out of sandwich type construction with base in kadappah / Kotah stone overlaid in Black Granite 75mm wide facia on three exposed sides. Counter to be held on to concealed MS brackets (Cost included Nirali Make SS Sink Popular Range Glister 510mm x 432mm x175mm satin (Bowl 460mm x 385mm x 200mm) & necessary cut outs to take basin /S S sink and to take necessary Pipes as per detail drawing.& Including 19 mm th. BWP specified ply with both side laminated plate form shutters & Drawers With necessary hardware as per drawing

Water Cooler : Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚ C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. ◦

Toilet Basin Mirror Frame : Providing & fixing of 6mm th. Mirror on backing of 12 mm plywood with required teak wood frame work & fixing with SS Stud

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Size : Main Table 2300 L X 1000 W x 750 H mm Size : Side Table 1400 L X 550 W x 750 H mm Table Top: 25mm thick MFC panel with 2mm PVC edge lipping & 8mm color glass on top with sides covered with aluminium strip Support: End Legs: 25mm thick MFC panel & 3 equal drawer pedetal with aluminium die cast arms. Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht. Wire Management: 65mm dia wire manager grommet on table, flip up and provision to place CPU in side extension drawer. Side table : side table Top 25mm thick MFC panel with 2mm PVC edge lipping & No glass on PLB top. support storage finished with 18mm thick pre laminated boards.

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Size : Main Table 2100 L X 900 W x 750 H mm Size : Side Table 1200 L X 450 W x 750 H mm Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges. Support: End Legs: Enrich legs and Supporting beams. Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht. Wire Management: Slide connect with wireless charger and Vertebra. approved by an Engineer in charge.

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : Connect Cabin Table Size : Main Table 1800 L X 900 W x 750 H mm Size : Side Table 1200 L X 450 W x 750 H mm SYSTEM : SWITCH 40 ( Angular Legs ), Specification : Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support. End Legs: MS powder coated SWITCH 40 ( Agular ) l Modesty Panel: 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht Wire Management: : 300mm flipup with vertical wire entry cover

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : CABIN TABLE Size : Main Table 2100 L X 600 W x 750 H mm SYSTEM : SWITCH 40 ( Angular Legs ) , Specification : Table top : 25mm thick Pre-laminate particle board with 2mm pvc edge banding on all expossed edges. End Legs: MS powder coated SWITCH 40 ( Agular ) Modesty Panel :18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht . Wire management : 300mm flipup with vertical wire entry cover.

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : CABIN TABLE Size : Main Table 3600 L X 1200 W x 750 H mm Specification : Table top : 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edgesSupport. End Legs: MS powder coated legs (50X50). Modesty Panel : 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht. Wire management : 65 dia grommet hole PLB Mobile Pedestal 2D+1F

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : CABIN TABLE Size : Main Table 1500 L X 600 W x 750 H mm Specification : Table top : 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edgesSupport. End Legs: MS powder coated legs (50X50). Modesty Panel : 18mm thk pre lam board with 2mm PVC edge lipping of 450mm Ht. Wire management : 65 dia grommet hole PLB Mobile Pedestal 2D+1F

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : Glass Side Table 610-FS Size : Main Table 600 L X 600 W x 505 H mm

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : Glass Center Table 610-FS Size : Main Table 1200 L X 600 W x 425 H mm

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : TABLE WOOD LEGS Size : Main Table 600 L X 600 W x 450 H mm Under-structure is made from solid wood ie., in Beach wood, finished with clear PU coating. Legs are fixed with height adjustable levellers for leveling, based on floor undulation upto 10mm.

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : TABLE WOOD LEGS Size : Main Table 1050 L X 525W x 450 H mm Under-structure is made from solid wood ie., in Beach wood, finished with clear PU coating. Legs are fixed with height adjustable levellers for leveling, based on floor undulation upto 10mm.

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : LACTURE TABLE Size : Main Table 800 L X 500 W x 750 H mm Specification : Table top : 25mm thick Pre-laminate particle board E1 norms finished with 2mm pvc edge banding. Under-structure : Supported on MS powdercoated Perform stright 50X50 with supporting fixed beams. Modesty panel : 18mm thick Pre laminated modesty panel of 225mm gap from Floor level Wire management: 65 Dia Grommet hole and 125mm Box type Raceway with vertical wire entry cover considered for cable access from floor to Raceway

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : Partition Table with Composite storage Size : Main Table 1650 L X 750 W x 750 H mm Size : Composite storage 1050 L X 450 W x 750 H mm NEO50 Systems - Cubical partation 1200Ht(Partition: Height -1200mm frame with top and sides in Aluminium trims and junctions with diecast caps.) NEO-5 Systems Tile Finishes :Above table top Level: Fabric one magnetic tile per workstation.Below table Top level: PreLaminated tiles and metal skirting tile on Main spine towards user. Size : Size of L Shap Partition With Cabin Table

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Size - 3000 L x 600 D x 750 H mm PRODUCT - STORAGE Table Top: 25mm thick MFC panel with 2mm PVC edge lipping & 8mm color glass on top with sides covered with aluminium strip mounted on aluminium die cast arms. Back: 25mm thick MFC panel with aluminium die castarms. Shutters : 25mm thick MFC panel with brush steel handles and softclose drawer slides and hinges. Sides: 25mm thick MFC panel with 2mm PVC edge lipping.

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Size - 2400 L x 450 D x 1200 H mm PRODUCT - STORAGE Side Storage Made up of 18mm thick Prelam particle board with Number lock

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. SIZE - 3000 L X 450 D X 1200HT mm PRODUCT - STORAGE Side Storage Made up of 18mm thick Prelam particle board with Number lock

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. SIZE - 2700 L X 450 D X 1200HT mm PRODUCT - STORAGE Side Storage Made up of 18mm thick Prelam particle board with Number lock

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. SIZE - 2900 L X 450 D X 1200HT mm PRODUCT - STORAGE Side Storage Made up of 18mm thick Prelam particle board with Number lock

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. SIZE - 2850 L X 450 D X 1200HT mm PRODUCT - STORAGE Side Storage Made up of 18mm thick Prelam particle board with Number lock

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. SIZE - 4200 L X 450 D X 1200HT mm PRODUCT - STORAGE Side Storage Made up of 18mm thick Prelam particle board with Number lock

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : L SHAPE WORKSTATION Size: 1500-1500 L X 600 D X 1100 HT mm SYSTEM : SWITCH 40 Specification : Table top : 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges. Support: End Legs: MS powder coated SWITCH 40 ( Agular ) legs Intermediate Legs: MS podwer coated 60X40mm legs and supporting MS cross beams Wire Management : 65 mm Grommet With 250m PLT Raceway With vertica wire entry cover Main Screen : 8mm COLOR GLASS SCREEN ON STUDS (1350 L X 350ht) Return Screen : 8mm COLOR GLASS SCREEN ON STUDS (1350 L X 350ht) Pessage Side Modesty : Plt Modesty 400 Ht

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : Padestel Workstations Padestal 2D+1F Size: 400 X 450 X 600 Specifications: Top & Sides: 18mm Thk pre laminated particle board. Back: 9mm Thk pre laminated particle board. Edge: All exposed area with 2mm thick PVC edge lipping. Handle: Finger groove handleLock: Regular lock

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : CONFERENCE TABLE SYSTEM : PERFORM - Size 6800 X 1200 X 1500 X 750 Specification : Table Top : Made of 25mm thick E1 grade pre-laminated particle board. Body:- Made of 18mm thick pre-laminated particle board with 400W 2pencil drawers+1filing drawer pedestal, remaining openable shutters and FINGER GROOVE handles + lock and keys.

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : CONFERENCE TABLE SYSTEM : PERFORM - Size 4500 X 1500 X 750 Specification : Table Top : Made of 25mm thick E1 grade pre-laminated particle board. Body:- Made of 18mm thick pre-laminated particle board with 400W 2pencil drawers+1filing drawer pedestal, remaining openable shutters and FINGER GROOVE handles + lock and keys.

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. PRODUCT : CONFERENCE TABLE SYSTEM : PERFORM - Size 3500 X 1500 X 750 Specification : Table Top : Made of 25mm thick E1 grade pre-laminated particle board. Body:- Made of 18mm thick pre-laminated particle board with 400W 2pencil drawers+1filing drawer pedestal, remaining openable shutters and FINGER GROOVE handles + lock and keys.

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Side Storage - 1200 L x 450 D x 750 H mm Storage : Side Storage Made up of 18mm thick Prelam particle board with Number lock

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. For Medium Storages Size - 1500 L x 450 D x 1200 H mm PRODUCT - STORAGE Table Top: 18mm Thk pre laminated particle board Back: 9mm Thk pre laminated particle board with 2mm PVC edge lipping Shutters: 18mm Thk pre laminated particle board Edge: All exposed area with 2mm thick PVC edge lipping Handle: New finger groove - handleless Lock: Regular lock

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Supply Leatherette Seat & Back (Main Chair) * Half Leather Seat and Back * Aluminium Frame * Multi-Lock Mechanism * Fixed Aluminium Arms * Aluminium Base

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Supply VISITOR CHAIR * Half Leather Seat and Back * Aluminium Frame * Multi-Lock Mechanism * Fixed Aluminium Arms * Aluminium Base

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Supply of 3 SEATER SOFA made off solid wood frame, supported with high class webbing belt, 40/32/40 density foam used, topped with 2" softy foam for great sitting experiace, upholstered with Tan Color Leatherrete size : 3 s : 1900 x 750 x 800 SHADE : TAN Leatherette

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Supply of 2 SEATER SOFA made off solid wood frame, supported with high class webbing belt, 40/32/40 density foam used, topped with 2" softy foam for great sitting experiace, upholstered with Tan Color Leatherrete size : 2 s : 1375 x 750 x 800 SHADE : TAN Leatherette

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Supply of 1 SEATER SOFA made off solid wood frame, supported with high class webbing belt, 40/32/40 density foam used, topped with 2" softy foam for great sitting experiace, upholstered with Tan Color Leatherrete size : 1s : 875 x 750 x 800 SHADE : TAN Leatherette

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Model - ANATOM HBGS ADJ ARMS WITH HEADREST * High Back Mesh Chair * With Headrest * KM Series Mesh * Fabric Upholstered Cushion Seat * Self Calibrating Multilock Mechanism * Adjustable Lumbar Support * One Way Adjustable Arms (Height) * Nylon Base

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Model : ANATOM MBGS ADJ ARMS ( With Castors) * Medium Back Mesh Chair * Without Headrest * KM Series Mesh * Fabric Upholstered Cushion Seat * Self Calibrating Multilock Mechanism * Adjustable Lumbar Support * One Way Adjustable Arms (Height) * Nylon Base

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Model : ANATOM MBGS ADJ ARMS ( Without Castors) * Medium PP (Black)Back Mesh Chair * AN 70 Mesh * Fixed Arms * Powdercoated 4 Legs * Fabric Upholstered Cushion Seat

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Providing and fixing of 3 SEATER chair WITH CUSHION - FOR WAITING AREA *Forum 3 Seater * With Cushion *With Arms

Providing and fixing Moduler furniture (Factory made) as per below specification including erection at site. Providing and fixing of 2 SEATER chair WITH CUSHION - FOR WAITING AREA *Forum 2 Seater * With Cushion *With Arms

SRISHTI ENTERPRISES (BID ID -8756)

SHAN ENTERPRISES (BID ID -8831)