Supply, installation, testing and commissioning of Fire Fighting System at Govt. Dental College/Hospital, Srinagar.

Amount

Supply, Installation, Testing and Commissioning of Main electric fire Pump of capacity 2280 LPM The pump shall be single/ multi stage horizontal centrifugal type with volute bronze impeller connected to a TEFC induction motor suitable for 410/440 volts, 3 phase , 50 cycles AC supply as per techinical specifications of annexure B.

Supply, Installation, Testing and Commissioning of Jockey Pump of capacity 180 LPM . The pump shall be single/ multi stage horizontal centrifugal type with volute bronze impeller connected to a TEFC induction motor suitable for 410/440 volts, 3 phase , 50 cycles AC supply as per techinical specifications of annexure B.

Supply, Installation, Testing and Commissioning of Diesel Engine Driven Pump of capacity 2280 LPM . The pump shall be Multi cylinder , heat exchanger cooled Diesel Engine Driven Fire Pump. The pump shall be single/ multi stage horizontal centrifugal type with pressure reducing valve complete. as per techinical specifications of annexure B.

Supply, Installation, Testing and Commissioning of Air Vessel as per techinical specifications of annexure B

Supply, Installation, Testing and Commissioning of Vibration elimination pads for below mentioned pumps as per techinical specifications of annexure B.

Type A (for Jockey pumps)

Type B ( Main fire pumps)

Type C (for diesel pump)

Providing and fitting of 25 mm dia gun metal fitting for water level indicator gauge with isolation valve at top and bottom, heavy guage transparent polythylene tube of approx. 5 m length with colour indicator float clamped to teak board 100 mm wide x20 mm with graduation in KL as per techinical specifications of annexure B.

Providing and fixing liquid level controller for fire pumps to cut off in case low level of water in tank including cables,pannel ,etc. and making necessary connection to panel and commissioning there of as per techinical specifications of annexure B..

Supply ,Installation, Testing and Commissioning of Diesel engine driven pump exhaust made of M.S pipe class 'A' 80 mm dia including fitting like flanges,bends,reducers ,etc. The Job includes providing and fitting of 50 mm thick glass wool insulation, aluminium cladding 22 gauge thick, fixing of silencer connection at engine exhaust necessary supports ,backfilling ,cutting and making good bird proof and weather proof flap complete in all respects as directed by site Incharge as per techinical specifications of annexure B.

Supply ,Installation, Testing and Commissioning of Dial type pressure gauge with isolation cock and connecting piping, bleed & block valve of below mentioned dial diameteras per techinical specifications of annexure B.

Dial diameter 150 mm caliberation 0- 20 kgf/ sq.cm.

Supply ,Installation, Testing and Commissioning of Pressure switches suitable for operating with fire hydrant systems for working pressure of 0-20 Kg/cm² including electrical control wiring with suitable copper conductor PVC insulated and sheathed control cable upto control panel, connections etc. complete as required as per techinical specifications of annexure B.

Valves & Allied Items

Supply ,Installation, Testing and Commissioning of Cast iron dual plate wafer type non return valves PN 1.6 including nuts, bolts, 1.5 mm thick gasket companion flanges of below mentioned diameters and as per the techinical specifications of annexure B.

65 mm dia

80 mm dia

150 mm dia

Supply ,Installation, Testing and Commissioning of Cast iron butterfly valves conforming to PN1.6 I.S.13095 with "Lever" or gear operated, bolts, nuts, 3 mm thick insertion rubber gasket complete including companion flange all complete of below mentioned diameters and as per the techinical specifications of annexure B.

65 mm dia lever operated

80 mm dia lever operated

150 mm dia lever operated

200 mm dia lever operated

Supply ,Installation, Testing and Commissioning of Reselient rubber neoprene lined single vibration elimination connection with unit control suitable for raw water upto 45 ° C temperature working pressure 20 kg/sqcm as per techinical specifications of annexure B.

65 mm dia

80 mm dia

150 mm dia

200 mm dia

Supply ,Installation, Testing and Commissioning of C.I. “Y” suction strainer 200 mm nominal size with stainless steel perforated sheet screen,flanged ends installed outside water tanks as per the techinical specifications given in annexure B

200 mm dia

Supply ,Installation, Testing and Commissioning of Cast iron sluice valves o of PN 1.6 rating flanged at both ends of following sizes complete with rubber insertion, nuts, bolts and washers etc. as per the techinical specifications of annexure B

150 mm dia

Constructing masonry chamber 120x120x150 cms inside with 75 class designation brick work in cement mortar 1 : 5 (1 cement : 5 coarse sand) for sluice valve with MS 60 x 60 cm manhole and RCC top slab 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including steel reinforcement including excavation and PCC concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand and 4 graded stone aggregate 40 mm nominal size) pedetials for supporting the pipe and sluice valve concrete and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per drawings.

Air cushion tank made of minimum 6 mm thick M.S. pipe/plate complete with 25 mm dia. Brass Air Valve (Ball valve, pressure guage type), 25 mm dia. Stop with brass stop cock,nipple, tees, elbow and all accessories as required incl. fixing brackets as per techinical specifications of annexure B.

M.S "C" Class Pipes

Supply ,Installation, Testing and Commissioning of Black steel pipes as per IS : 1239 (Heavy class) of below mentioned sizes . The job further includes all fittings like anchors, fasteners, couplings, bends, elbows, flange, tees, etc. Welded or flanged joints as required, painting with two coats of enamel paint as per colour code over a ready mixed priming coat. The job further includes surface preparation cutting holes and chases complete as per techinical specifications of annexure B.

65 mm dia

80 mm dia

100 mm dia

150 mm dia

Supply ,Installation, Testing and Commissioning of Black steel pipes as per IS : IS 3589 of thickness 7mm of below mentioned sizes . The job further includes all fittings like anchors, fasteners, couplings, bends, elbows, flange, tees, etc. Welded or flanged joints as required, painting with two coats of enamel paint as per colour code over a ready mixed priming coat. The job further includes surface preparation as per techinical specifications of annexure B.

200 mm dia

250 mm dia

Supply ,Installation, Testing and Commissioning of MS C Black steel pipesIS : 1239 (Heavy class)of below mentioned sizes. The Job further includes all fittings like anchor fastners, couplings, bends, elbows, flange, tees, etc. Welded or flanged joints as required, including applying with one coat of readymix primer, wraping the pipe with 4mm thick wraping tape . The Job further includes laying the pipe so that the top of the pipe is at a depth of one meter below ground level including excavating trenches (Hard/Rocky Soil) and then refilling the soil in layers not exceeding 20 cms. in depth, consolidating each depodited layer by ramming, watering etc. complete as required as per techinical specifications of annexure B.

150 mm dia

100 mm dia

Providing and fitting of Blank flanges including nuts, bolts, 3mm thick rubber gasket complete in all respects of below mentioned sizes

Providing and fixing M.S puddle flanges with three coats of epoxy after surface preparation, of required size to water tanks , fabricated from heavy duty pipe and 6 mm thick M.S.plate .

200 mm nominal bore

150 mm nominal bore

100 mm nominal bore

80 mm nominal bore

50 mm nominal bore

25 mm nominal bore

Electrical

Supply ,Installation, Testing and Commissioning of control panel as per the specifications of annexure B. The energy meter to be provided on on the electrical panel

Providing and fitting of 300mm width x 50mm depth x 2mm thick perforted M.S. cable trays including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S suspenders and including painting etc. as reqd.as per techinical specifications of annexure B.

Providing and fitting of Earthing with G.I earth plate 600mmx600mmx6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc including charcoal or coke and salt etc complete as required as per techinical specifications of annexure B.

G. I. strip / wire of following sizes as required at site as per techinical specifications of annexure B.

25 x 6 mm G.I. Strip

G. I. Wire 6 SWG

Fire Hydrant System

Single headed, Gun metal ISI marked oblique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS:5290-1983 (Type 'A')as per techinical specifications of annexure B.

First-Aid Fire Hose Reel wall mounting swinging type complete with drum, bracket, 25 mm dia. ball valve and 20 mm dia.x 36M long high pressure Hose Reel tubing as per IS:444 & ISI marked with Gunmetal shut-off nozzle having 5mm dia. orifice. The Hose Reel shall strictly confirm to IS : 884-1985.as per techinical specifications of annexure B.

Non-percolating flexible hose (RRL type-'A') ISI marked (IS:636) 63 mm dia x 15 M long complete with instantaneous type gunmetal 63 mm dia. IS marked Male and female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire.as per techinical specifications of annexure B.

Controlled Percolating (CP) Hose ISI marked (IS:8423) 63 mm dia x 15 M long complete with instantaneous type gunmetal 63 mm dia. IS marked Male and female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire.as per techinical specifications of annexure B.

Gun-metal 63mm dia short size branch pipes with 20 mm dia nozzles with 63mm instantaneous coupling ISI marked (IS: 903).as per techinical specifications of annexure B.

Standard fireman's axe with heavy rubber handle

M.S. cabinet door fabricated from 16 g M.S. sheet with full glass and locking arrangement, suitable to enslose the fire fighting enclosure/space accommodating 1 Hydrant landing valve, 1 fire hose reel, 2 nos.15m long 63mmdia hose,1-branch pipe. The door shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raised masonry platform as required.(Approx. size 1.2 m x 2.1 m) INCLUDING COST OF PROVIDING AND FIXING SUITABLE MS cabinet. FOR Internal Hydrants.

100mm dia two-way fire brigade inlet connection consisting of 63mm size instantaneously make coupling and shall be protected by cap scored with a chain glass bore etc. complete with one 100mm dia sluice valve and 100mm dia non-return valve (To be connected to external ring main/wet riser/sprinkler riser)

Gun-metal 4-way fire brigade inlet connection of 4 nos. 63mm dia instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per I.S:904. (to be connected to static tank). as per techinical specifications of annexure B.

Providing and fixing of 4-way Gun-metal Fire Brigade Connection consisting of 63mm dia instantaneous type male coupling with built in check in valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per I.S:904-1983.

Weather proof hose cabinets for yard hydrant fabricated from 16 g MS sheet with full glass door and locking arrangement, suitable to accommodate one hydrant valve, 2 nos.15m long hose, 1 No branch pipe and one fireman's axe. The cabinet shall be painted with one coat of primer and finished stove enamelled "Fire Red", "Fire Hose" written on front including suitably mounted on a raised masonry platform as required. (Approx 0.75mx0.6 mx 0.25 m). For External Hydrants

Gun-metal Fire Brigade Suction Hose coupling (Draw-out Connection) with nut for female coupling as per IS:902- 1974 complete with 100 mm dia. G.I. Suction pipe and 100 mm dia. 1No. C.I. Foot valve flanged (to be connected to static water tank).

MS cabinet (to enclose above, draw-out/fire brigade inlet connections) fabricated from 16 g sheet with full front glass door and locking arrangement duly painted with one coat of primer and two or more coats of synthetic enamel paint of approved make and shade and suitably mounted on a raised masonry platform as required (Approx.0.6 m x 0.6 m x 0.45 m )as per techinical specifications of annexure B.

Supply and Installation of water mist and CAF Fire Extinguishers as per technical specifications of annexure B

Supply and Installation of portable 6 Kg capacityDry ABC Fire Extinguishers as per technical specifications of annexure B

Providing and fixing of fire bucket stands at designated locations.

Providing and fixing of fire buckets of 9 litre capacity to the stands.

FIRE TECHNOS