SPECIAL REPAIR TO EXTERNAL ELECTRIC DISTRIBUTION LINES, WATER SUPPLY PIPELINE AND CONNECTED WORKS AT UDAIPUR MIL STN

Amount

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out from any type of soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm any type of soil.

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point

Material & labour for taking out old GI Pipe 50mm dia from trenches and removing from site

Material & labour for taking out old GI Pipe 40mm dia from trenches and removing from site

Taking out G I pipe 25 mm dia fixed on wall in existing position and removing from site.

Taking out G I pipe 20 mm dia fixed on wall in existing position and removing from site.

Supply and Laying G I TUBING 50 mm dia socket ends, medium grade including all fittings and accessories(elbow, union, socket, nipple, tees, reducer etc.) , in any length, laid in trenches fixed on ground / pedastal and making good disturbed ground/pedastal.

Supply and Laying G I TUBING 40 mm dia socket ends, medium grade including all fittings and accessories(Elbow, Union, Socket, Nipple, Tee, Reducer etc.) , in any length, laid in trenches fixed on ground / pedastal and making good disturbed ground/pedastal.

Supply and Laying G I TUBING 25 mm dia socket ends, medium grade including all fittings and accessories (Elbow, Union, Socket, Nipple, Tee, Reducer etc.) , in any length, laid in trenches fixed on ground / pedastal and making good disturbed ground/pedastal.

Supply and Laying G I TUBING 20 mm dia socket ends, medium grade including all fittings and accessories(Elbow, Union, Socket, Nipple, Tee, Reducer etc.) , in any length, laid in trenches fixed on ground / pedastal and making good disturbed ground/pedastal.

Supply and replace in existing location / position Gun Metal,Globe or Gate Valves with iron wheel head screwed both ends for iron pipe and fixed size 50 mm ISI marked. (Make :- Zoloto/Sant/Leader)

Supply and replace in existing location / position Gun Metal,Globe or Gate Valves with iron wheel head screwed both ends for iron pipe and fixed size 40 mm ISI marked. (Make :- Zoloto/Sant/Leader)

Supply and replace in existing location / position Gun Metal,Globe or Gate Valves with iron wheel head screwed both ends for iron pipe and fixed size 25 mm ISI marked. (Make :- Zoloto/Sant/Leader)

Supply and replace in existing location / position Gun Metal,Globe or Gate Valves with iron wheel head screwed both ends for iron pipe and fixed size 20 mm ISI marked. (Make :- Zoloto/Sant/Leader)

Supply and replace in existing location / position Non Return valve 50 mm bore both end flanged ISI marked including making new flanged joints with 3 mm thick rubber gasket with necessary bolts, nuts, washer etc of suitable size complete all as specified and directed by Engineer in Charge. (Make :- Zoloto/Sant/Leader)

Supply and fixing mild steel, plain sheet of thickness 1.00 mm in wall hearths, covering to door shutters, covering to door chowkats (frames), chullah hood, water tanks, water troughs, ducts, urinal troughs and funnels etc. cut to size, edges beaded if directed, hole puched, including round headed screws, clout nails or rivets and fixed to wood and steel members etc. with plain 40 mm lap joint or welded/riveted seems including bending, turning of mitred angels, stopped ends, outlets,two cats of synthetic enamel painting over a coat of red oxide primer etc. as required.

Construction of brick masonry valve pit chamber of size 600x600x450mm (for upto 50mm dia sluice valve) with angle iron frame 40x40x6mm,3mm thick MS plate and locking arrangement including painting with two coat of anti corrosive paint over a coat of red oxide primer all as speceified and directed by Engr-in-charge

Cutting of bushes and cleaning the area around pump house and OH tank, surrounding the reservoir near including cutting the bushes, trimming the trees upto 30cm girth, complete all all as specified and as directed by the Engineer in charge

M & L for scrapping out old rusted and corroded sufaces of cross arms, clamps, steel poles, pipes including nut, bolt & washer etc of any shape and size and preparing the exposed surfaces & applying two coat of aluminium paint over a coat of red oxide zinc crome primer complete all as specified and directed. Note : Each two pole structure with all MS angles, cross arms, clamps etc will be counted as one job.

M & L for PCC 1:4:8, Type D-2 (using 40 mm graded stone aggregate) in sub-base or in flooring of four pole / two pole area and road cutting area surface finished even & fair without unsing extra cement etc as directed by Engr-in-Charege.

M & L for PCC 1:2:4, Type B-1 (using 20 mm graded stone aggregate) in sub-base or in flooring of four pole / two pole area and road cutting area surface finished even & fair without unsing extra cement etc as directed by Engr-in-Charege.

Material and labour non linear resistor type surge arrester( lightening arrestors) confirming to IS 3070 (Part 1) having voltage rating 12 KV, Rated frequency-50 HZ, Nominal Discharge current 10 KA(Heavy duty) complete with all fittings , suitable for 11KV, 3-Phase, earthed distribution system complete all as specified

Outgoing : (i)Thermal magnetic MCCB TPN 200 Amps 36 KA -01 Nos (ii)Thermal magnetic MCCB TPN ,160 Amps 25 KA -01 No (iii)Space for MCCB 100 Amp,TP - 01 No (iv)Indication lamp LED Type set of three– Three set

Notes: (i) Rates are deemed to be inclusive of PCC platform of suitable size and 45cm height and 4 Nos legs of 50mmx50mmx6mm and 60 cm in height for fixing the panel (iii) Danger notice plate (02 Nos) LT size 20cmx 15cm shall be fixed on the panel (iv) Contractor provided power coated finish paint on panel.

Material & Labour for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized strip 32 X 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to OH conductor on pole/ Panel/ main switch board etc all as specified or indicated and testing on completion including provision galvanized strip protected by 40 mm bore, light grade pipe and watering pipe shall be 20 mm bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI strip and protection pipe upto 7.5 mtr complete all as specified and directed.

Taking down old Unsv and supply & fixing cable jointing kit for 11 KV (Eartherd ) grade cable joint, heat shrink indoor termination cold shrink type end joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sq mm.

Taking down old Unsv and supply & fixing cable jointing kit for 11 KV (Eartherd ) grade cable joint, heat shrink outdoor termination cold shrink type end joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sq mm.

Material & labour for sand cushioning for PVC/XLPE cable with screened and washed sand and punning to provided a required covers all as specified and directed.

Material and labour for sand stone slab ( patti) roughly hammer dressed stone 40 to 50 mm thick 25 to 30 cm wide and not less than 60 cm long laid dry and abutting each other with gap between adjacem,ent slab not exceeding 10 mm over underground cables for protection.

S & F in repairs 80mm bore mild steel tubing, "light grade" galvanized protection of under ground cable, on poles/walls/under road crossing etc with clamps/all fittings for holding the pipes including cutting and making good distrubed surgace complete all as specidired and directed.

Supply & laying, testing electric underground LT cable with fixing of lugs of suitable size of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavey duty) with aluminium conductor, 1100 volts, grade cross sectional area 120 sqmm 3 ½ core.

Material & labour for 2nd class hardwood, clean sawn boards or planks width of thick 40cm for two/four pole structure at a height of 5-t mtr from ground level with required nut, bolt, washer etc as directed by Engr-in-Charge.

Supply only tinned copper drop out fuse suitable for HT 11 KV line of sizes 10 Amps to 60 Amps

S&F in replacement of old unserviceable timer switch/ MCB SPN with timer switch SWADEEP-02EC 3KW1P (Nature switch - 02 + contactor - 25 amps per pole (2 pole bridged + MCB- 40 Amps etc) housed in pole mounted enclosure) Automatic Switching ON at Sunset, Automatic Switching OFF at Sunrise, operating Voltage range : 150-300 VAC. Automatic Over voltage sense, automatic low voltage sense, trip and auto reset. over load sense, trip and latch. Immunity to dust, bird sittings and cloud cover, Immunity to moon and other street light. Degree of protection conforms to IP65, complete fixed to pole/panel with suitable arrangement all as directed by Engr-In-Charge. (Make :-SWADEEP)

M&L for cold mix emulsion granules road patching material in making good of road 40mm thick. (Make : Bedroak chem / Infra LLP or eq).

M/s Shiv Builder and Suppliers

shree nathji trading corporation