Renovation of Moti Colony Park Ward 23 MC Palwal

Amount

`Leg Press: Providing, designing and fixing of stair stepper in a combination of pair and a single step of size 2000 X 550 X 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber at top end. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. `

Seated chest press: Providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick.

Triple Twister :- Providing, designing and fixing Twister of size 1700 X 1300 X 1300 mm fabricated with main post of 114mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

Sit up station :- Providing, designing and fixing Arm Wheel in a pair of size 1500x1150x650mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.

Air Swing : Providing designing and fixing air swing in pair of size 1150 x 900 x 1250 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational

Rowing Machine:- Providing, designing and fixing Rowing Machine of size 1280 X 800 X 1500 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment.

-Supply, installation testing and commissioning of submersible pumping set complete in ss suitable to operate on 410 volts 3 phase 50 HZ A.C. power supply, Motor efficiency IE 3 including water proof joint free flat submersible cooper cable,of 6 sqmm including earthing connection motor control panel complete in all respect as per details given below : (For Borewell) (Without GST)

Providing and fixing of Mutlicolor FRP made equipments PEACOCK shape with stpes with as as shown in image , as per size and specs mentined in image above. The FRP material shall be as per IS CODE /EURO STANDARD /pollution free and easy to maintain . The platform for the equipment fixing shall be inclsive with all supporting strcutural system in Mild steel with anchoring in concrete pedestal for steady erection at site, the shelf load an dchildern load shall be cosnidered for the erection purpose as per CODAL refrence (Without GST)

Supply, erection, testing and commissioning of an outdoor Bollar Light having 25W,die cast aluminum housing in pure polyster UV resistant powder with top opening die cast- cover,anti -corrosive stainless steel screws and silicon casket,HET PMMA diffuser, IP 65 protection.Drive duly wired up to terminal block confirms to IS 10322 PART5/Sec1:1987.The fixture will be as specified in this document under the relevant chapter. The fixture should be as approved with 25 Watt LED lamp along with driver.(without GST)

FRP Spiral Slide : Supply of FRP spiral slide, Size 5 ft with platform height is 5 ft and slide length of 5.5 ft. support of 50mm dia pipe with handles of 20mm dia pipe and ladder of 25mm dia pipe or rectangular tube with sheet platform. Slide made of roto mould. All the welding joints of the pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing, with Powder Coating of desired color and shade for proper finishing and attractive looks (Without GST)

Circular swing: Providing a Circular Swing of length 7ft made of main A type support frame of pipe 65mm OD MS pipe Apollo make with, top pipe of 65mm dia Apollo make welded to a 25mm thick bright bar solid rod to hang the circular swing of main round pipe made frame 32mm OD Pipe Apollo make consisting of MS seating seats made of rectangular tubular pipe to give proper comfort to the user, given final touch by bright colours by powder coating finish. (Without GST)

Monkey Bar Climber : Supply of monkey bar climber. Main frame structure of size 2ft and 7.5ft height. Main standing frame of pipe 60mm OD pipe and Climbing ladder pipe of 32mm OD Climbing ladder frame of 40mm OD pipe and ladder pipe of 32mm OD pipe. All the welding joints of pipe are robotic welded with joints scalloped as neccessary and dressed of removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing, with Powder Coating of desired color and shade for proper finishing and attractive looks. (Without GST)

A Type Swing : Supply of double swing set, size 10x3x8 ft. Main cross bar 50mm round pipe and 50mm MS Pipe for legs, four numbers of 8mm mild steel chains with Rubber flexible belt type seats. All the welding joints of the pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing, with Powder Coating of desired color and shade for proper finishing and attractive looks (Without GST)

Multicolour Kids Park Equipment Multiplay Station

4 mm Acrylic Letter with Samsung Module Light 305 SS Golden Letter with fitting and Transport Per letter (Width of letter= 12 inch and height of Letter= 18 inch)

Bidder Name

Amount

Achint Goyal (GSTN-NA) BID ID -1263817

M/s Hariom Enterprises (GSTN-NA) BID ID -1264095

CREATIVE COLLECTION (GSTN-NA) BID ID -1264219

VARSHA ENTERPRISES (GSTN-NA) BID ID -1264205

CREATIVE COLLECTION (BID ID -1264219)

VARSHA ENTERPRISES (BID ID -1264205)

M/s Hariom Enterprises (BID ID -1264095)

M/s Hariom Enterprises (BID ID -1264095)

VARSHA ENTERPRISES (BID ID -1264205)

CREATIVE COLLECTION (BID ID -1264219)