Onsite installation of main controlling switch 800Amps AB switch and VCB 11KV grade for feeding power to main bokaro feeder 11KV with repairing and reorganization of busbar at 33KV sub station Konar Exp OCP, BnK Area

Amount

Shifting pulling and Installation of 11 KV &3.3KV grade VCB

Supply of 38/50 mm outer dia aluminim Bus bar of 4mm thickness

Supply & fixing of Isolator Pad

Supply and providing of 50 mm x 6 mm copper flat for making of Z(4' long x 6 nos =7.32 mtr x 3.04 kg/mtr = 22.25kg x 5 % wastage = 23.36kg)

Supply and providing of 800 AMP 11 KV grade AB switch (horizontal type) heavy duty (Contact Copper pipe size 4mm)

Supplying of two length of channel iron 100m x 50 mm x 6 min (9.56 kg/m) double pole cross arm for 3 wire 33 KVoh line conductors complete with through bolts & nuts for clamping to the poles 50 mm x 6mm MS flat welded on one side to the channel iron & with bolts & nuts on the other side for tying the cross arm together including drilling holes for insulators pins/ fittings Bolt & nut, washers etc & painting with primer & finish paints required

Supplying of channel fron 100 mm X50 mm X 6mm (9.56 kg per mtr) cross arm for two wire 33 KV Oh line conductors complete with 50mm X 50mm x 6 mm angle iron bracket welded to the channel iron & complete with 50mm x 6mm ms flat iron clamps bolts & nuts including drilling holes for insulators pins fitting bolt, nut Washers etc & painting with primer & finish paint as required

Erection of double pole 3 wire cross arm for 11/22/33 KV OH as req

Erection of pole top/ straight two wire/Vshape two wire, angle iron/channel iron, cross arms on steel tubular/rail/ PCC pole for 11/22/33 KV as required

Fitting & fixing with fabrication of copper Z with jumpering

Supply & providing of MS nut-bolt with washer 16 mm x 40 mm

Supply & providing of MS nut-bolt with washer 16 mm x 125mm

Erection cost of ITEM no 4,10,11

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 40mm nominal size) foundation including excavation & refilling and secured with holding clamps, bolts, nuts etc as required (up to 8 to 10 mtr long)

Transporting of rail pale from dismantle place to working site

Supply and fixing of Post insulator/pin insulator 11 KV grade

Supply & fixing of Isolator Pad

Labour charge for fixing & commissioning of bus bar 38/50 mm outer dia aluminum bar of 4 mm thickness

Total impact of GST for the purpose of CTC

M/S SHREE TIRUPATI TRADERS

M/s Kiran Electrical works