SPECIAL REPAIR TO ROAD INCLUDING PATHWAY FROM MADHUBAN PARK TO TANK CHOWK IN SUKNA MIL STN UNDER GE SUKNA

Scarifying or picking graveled, macadam or bituminous macadam surfaces in area n.exc 400 Sqm but exc 50mm and n.exc 100mm deep complete all as specified and directed.

M&L for 150mm (compacted thickness) WBM in two layers 75 mm thick each with coarse aggregrate of grading 2 (63 to 40mm size) or grading 3 (50 to 20 mm size), spread, rolled and consolidated to required gradient with 8-10 tonne power roller complete all as specified and directed.

All as per Srl Item No. 2 here-in-above but except materials complete all as specified and directed.

M&L Preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with cationic emulsion SS1 conforming to IS 8887 at a rate of application of 0.7-1 Kg /sqm on surface of WMM/WBM as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed.

M&L Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 50mm or less) using asphalt sensor paver complete all as specified and directed.

M&L Preparing Black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a tack coat with cationic Bitumen emulsion (RS-1) conforming to IS 8887 at a rate of application of 0.2-0.3 Kg/sqm on bitumenious surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed.

M&L for 40 mm thick bituminous premix asphaltic dense aspphaltic concrete with 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient complete with sensor based mechanical pavers and rollers complete all as specified and directed.

S&F in repairs metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions.

S&F solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed .