Repairs/Renovation of 6 No. of AE & 5 No. of JE quarters at Hunasagi camp

Repairs/Renovation of 6 No. of AE & 5 No. of JE quarters at Hunasagi camp

Taking out doors, windows and clerestory window shutters (steel orwood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge.

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in a...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufact...

Providing flooring with 25mm thick polished Cuddapah slabs usingcement mortar 1:6, 25mm thick over existing cement concrete bed ortop of roof laid to line and level and jointed with cement slurry mixe...

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, of approved manufacturer,of required shade and colour complete, as per manufacturer'sspecificati...

Providing and fixing M.S. grills of required pattern in frames of windowsetc. with M.S. flats, square or round bars etc. including primingcoat with approved steel primer allcomplete. Fixed to openings...

Providing and laying to required line and slope roofing with corrugatedasbestos cement sheet 6mm. thick fixed with galvanised iron J or Lhooks, bolts and nuts 8mm. dia C.I plain and bitumen washers ov...

Providing and fixing Structural Steel work riveted, bolted or weldedin built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approve...

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Painting wood work with Deluxe Multi Surface Paint of requiredshade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primerapplied @0.75 ltr/10 m² of approved brand and manufacture to give a...

Providing Colour washing such as green, blue or buff to give an evenshade :New work (two coats) with a base coat of white washing with limewith colour of approved quality, after horoughly brooming the...

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perIS:13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Supplying heavy gauge PVC conduit pipe 32 mm dia 2.5 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs incase of RCC ce...

Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive pasteetc , and fixing using inverted wood plugs incase of RCC ceili...

Supplying heavy gauge PVC conduit pipe 19/20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive pasteetc , and fixing using inverted wood plugs incase of RCC ce...

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase&Neutral) & 1x1.0 sqmm(Earthwire) FRLS multi strand PVC insulated copper wire (confirming toIS-6...

Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50HzAC supply & completely wired on existing box as directed by Engineer in charge of the work.

Wiring for lighting/power circuit using one of FRLSPVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLSPVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existingwoodenor metal box using N.F. screws as directed by Engineer in charge of the work.

Supplying and fixing of Shunt trip suitable for MCCB. CBCT as directed by Engineer in charge of the work.

Supplying and fixing regular MCB distribution boards on wall/ood board/ flush mounting using required clamps, bolts, nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3 pha...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...