Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
3 Nov 2026, 6:00 pm7d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE Haddo Sri Vijaya Puram
GARRISON ENGINEER HADDO MILITARY ENGINEER SERVICES HADDO SRI VIJAYA PURAM 744102
SERVICING B CHECKS TO CAPTIVE STANDBY GENERATORS AND CERTAIN MAINTENANCE OF FEEDER PILLAR BOXES, LT PANEL, SWITCH GEAR, LT UG CABLES, SERVICE DUCTS, COPE BOXES AND CERTAIN ELECTRICAL WORKS AT EoJ (NSRY) OF AGE E/M UNDER GE HADDO, SRI VIJAYA PURAM
2026_MES_793826_1
8402/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
GE Haddo Sri Vijaya Puram
Class D and Category b(i)
9 documents required · 9 mandatory
₹500
GE Haddo
₹80,000
Yes
14 Oct 2026
14 Oct 2026
5 Nov 2026
14 Oct 2026
3 Nov 2026
28 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for Laser alignment of alternator with engine of 1250 KVA DG set including replacement of rubber coupling complete all as specified and as directed by Engineer-in-charge.
Make of DG Set: Cummins Model KTA-50-G3 | 1 | Job | - | - |
| 2 | S&F Drive end bearing of existing make and model as per site requirement for 1250 KVA DG set including main rotor dynamic balancing including taking down old unserviceable item complete all as specified and as directed by Engineer-in-charge.
Make of DG Set: Cummins Model KTA-50-G3 | 1 | Each | - | - |
| 3 | S&F Non drive end bearing of existing make and model as per site requirement for 1250 KVA DG set including main rotor dynamic balancing including taking down old unserviceable item complete all as specified and as directed by Engineer-in-charge.
Make of DG Set: Cummins Model KTA-50-G3 | 1 | Each | - | - |
| 4 | S&F Exhaust Bellow of 475mm dia size as per existing make and model as per site requirement for 1250 KVA DG set including necessary nuts, bolts and washers including taking down old unserviceable item complete all as specified and as directed by Engineer-in-charge.
Make of DG Set: Cummins Model KTA-50-G3 | 1 | Each | - | - |
| 5 | Cleaning the radiator intercooler of 1250 KVA DG set (Cummins Model KTA-50-G3) by checking and removing the deposited dust, oil welt and carbon deposits etc. with wire brushes, cleaning agents etc. complete all as specified and as directed by Engineer-in-charge | 2 | Job | - | - |
| 6 | Taking down unserviceable self-starter 24 volts for DG set (Cummins Model KTA-50-G3) from engine,dismantling and opening of stater and armature,replace the wornout carbon brush,pinion,ignition coil bearing,bushing, including servicing, varnishing of stater after repairing assembling,refixed to same position complete all as specified and directed. | 1 | Job | - | - |
| 7 | S&F in repairs rotating rectifier diode set (forward - 3 Nos & reverse - 3 Nos) along with surge arrestors suitable for 1250 KVA Cummins DG set (Cummins Model KTA-50-G3), fixing and connecting in the circuit, starting and testing on load complete all as specified and as directed by Engineer-in-charge. | 1 | Each | - | - |
| 8 | M&L for carrying out "B" check for 1250 KVA DG set [Make: Cummins, Model: KTA-50 G3] as per manufacturer's recommendation including replacement of necessary spares and filters such as Fuel filter-02 Nos , SLO Bypass filters-02 Nos and Lub oil filters-04 Nos complete including rectification of minor defects, cleaning of air filters/ crankcase breather/Baffeltype breather & coolant tank with air blower, replacement of Engine oil & coolant and tuning of engine all as specified and directed. Location: NSRY
[Notes: (i) Supply only Engine oil & Coolant shall be measured and paid separately. (ii) Rate quoted shall include for all filters, topping up distilled water in batteries & minor accessories like nuts, bolts, 'O' rings etc.] | 8 | Job | - | - |
| 9 | Supply only Engine oil 15w 40 type: API CH4 or CI4 / Valvoline cummins premium Blue API CH4, CES 20071 & CES 20076 for Cummins as per requirement and manufacturer recommendation
[Make: Servo/ Valvoline/ Castrol/Mobil/Greaves] | 1,400 | Ltr | - | - |
| 10 | Supply only premix coolant/ corrosion inhibitor suitable for 1250 KVA DG set Make: Cummins, Model: KTA-50 G3 as per manufacturer's recommendation. | 1,500 | Ltr | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.31 MB
8402Tender.pdf
Tender Documents • 0.98 MB
BOQ_890278.xls
BOQ • 0.47 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .