Pdg Access ctrl to addtnl doors, addtnl CCTV cameras, assoc works TTSC BG-RECAL1

Amount

SH –I: IBMS (INTELLIGENT BUILDING MANAGEMENT SYSTEM)

SITC of Layer II managed 24 ports POE switch with RJ45 ports 10/1000 mbps ports and two uplink gigabit ports complete as required. make: Cisco/Juniper

SITC of Temperature cum Humidity Sensor of Resistance Temperature Detection Type of PT 1000 / NI 1000/ NTC 20k with builtin LCD display for Temperature & RH.These shall be two wire type sensors.The accuracy shall be at least + 1 OC over the range and as per the detailed specification enclosed and Relative Humidity sensors shall capacitance type with an effective sensing range of 10% to 90%. The accuracy shall be ± 5 % or better complete as required as per detailed sepcifications attched. for UPS room

SITC of SMS module for existing IBMS system with all accessories (SIM card will be provided by BSNL/DOT). Including necessary configuration to integrate seamless with existing IBMS system and to configure alarms to atleast two phone numbers, the sms should include point name, current value and alarm limit value

SH‐II: ACS (ACCESS CONTROL SYSTEM)SUB ACCESS CONTROL PANEL: SITC of following Microprocessor based Access controller Reader Module (to connect to existing access controller) for connecting the item such as card readers, Magnetic locks etc. with suitable size MS powder coated enclosure, power supply units along with PSU, on‐board additional Inputs /Auxiliary outputs and all accessories The module should be UL listed. The access controller is to be integrated with the analog addressable fire alarm system for operation. The DOTL (Door Open Too Long) Alarm shall be generated by the control panel as per set timing. (a) Modules Suitable to connect upto 6 readers

Biometric Finger Print Reader: Supply Installation Testing and Comissioning of Biometric finger reader having inbuilt smartcard readers with pin pad complete with enclosure, protective cover to avoid scratching and all accessories i/c door interface module (if applicable) , power supply unit etc. as per the detailed technical specification attached for Doors at Server room. The reader log data should be transferred to server on real time basis.The reader should be capable of both enrolment purpose and access control purpose. make: HID

EM‐LOCK FOR DOORS: SITC of Electromagnetic Locks of 600 lbs holding force suitable for operating with 12/24V DC along with power supply and Green /Red LED for indication UL listed with built-in door monitor status as per the specification (a)For double leaf doors

SH –III: IP CCTV surveillance system :SITC of Indoor/outdoor varifocal IR Dome Camera having Full HD resolution ( 1920 x 1080 ) 3.0MP or better Low light colour cameras with sensitivity of minimum 0.12 lux in color mode & 0.03 lux in B/W mode along with power supply unit. The cameras shall use the 1/3 inch format CMOS/CCD imager and shall have a 3 to 12 mm varifocal lens. Electronic Shutter range of 1/5 - 1/10,000. The cameras shall have digital wide dynamic range (WDR) of upto 60 db. The Cameras shall be POE (IEEE 802.3af class 3). The Cameras shall be ONVIF / PSIA compliant and complete as per detailed specification attached. make: Honeywell

VMS EXPNANSION LICENSE : SITC of Video Management system software of 8 additional licenses for existing Video Management Software at TTSC Lab Make: Milestone

SH‐IV: Cabling :S/L of following type and size of cable etc. complete as required (a)6‐C x 1 sq. mm Cable: S/L of 6‐Core, 1 sq. mm copper conductor Shielded FRLS armoured cable for Communication as required.

(b)CAT‐6 Cable: S/L of Cat‐6 armoured cable for Camera to Network switch.