Loading
Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹2.2 L
Closing Date
16 Jan 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
ELECTRICAL
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of GCC-April-2022 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
1)Erection of LT or above voltage level distribution panels or. 2)Erection and commissioning LT or above voltage level line (over head or underground) or. 3)Electrification /Rewiring service buildings, bunglow and quarters or. 4)Supply and erection of tower light or. 5)Lighting of station/Administrative building /Circulating area
The tenderer shall posses the valid Electrical Contractor's license and Supervisory License issued by any State/Central Govt. licensing board for the required voltage level or above with their tender paper. Tenders without valid electrical contractor's license & Supervisory license will summarily be rejected. Note - It should be mandatory to mention working voltage level in contractor license required as per this instant tender. Documentary evidence in support of consent between both contractor & supervisor is also essential to upload with document.
24 conditions · 6 needing a document upload
Scanned copy of PAN (Permanent Account Number) and Goods and Services Tax Registration Certificate indicating GSTIN should be uploaded. In case of non-availability / non-applicability of any of these documents, reasons should be furnished under 'Remarks'. GSTIN along with other details required under CGST/SGST/UTGST/IGST Act may also be submitted by the successful tenderer immediately after the award of contract
The tenderer will have to make payment towards Earnest money deposit (EMD) against this tender through online payment modes like net banking, debit/ credit cards etc. available on IREPS portal (www.ireps.gov.in). The tenderer is required to pay the Earnest Money deposit before he can prepare and submit his bid. Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Earnest Money on submission of Registration Certificate issued by appropriate authority. 100% Govt. owned PSUs shall be exempted from payment of earnest money deposit. Labour Cooperative Societies shall deposit only 50% of above earnest money deposit on submission of necessary documents.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
In support of their credentials, the Tenderers should submit along with their tenders document - List of Plant and Machinery available on hand (own/hired) and proposed to be inducted (own/ hired) to be given separately for the subject work .
The Earnest Money and Cost of tender booklet : There is one mode for submssion of EMD through online payment. The bidders will have to make payment towards tender document cost and earnest money against the tender through online payment modes like net banking, debit/ credit cards etc. available on IREPS portal in favour of FA & CAO, ECR, Hajipur payable at Hajipur executed by State Bank of India or any of the Nationalized Banks or Scheduled Bank.
Eligibility criteria for works tender in respect of partnership firms:-
in case the tenderer is a partnership firm s , the experience, solvency and turn over shall be in the name and style of the firm only.
If the tenderer is a partnership firm, all the partners shall be jointly and severally liable for successful completion of the work and no request for change on the certification of the firm shall be entertained.
During the currency of the contract, no partner of the firm shall be permitted to withdraw from partnership business and in such and event it shall be treated as breach of trust and abandonment of the contract.
JOINT VENTURE will not be permitted for the tenders.
Any Conditional offer will be summarily rejected.
Rates are inclusive of all taxes/GST, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
Earnest Money and Tender Document Cost: -All the tenderers / Contractors have to deposit full earnest money and tender document cost as stipulated in the tender document through online modes as permitted in IREPS application.
Electrical work in connection with Improvement of Bettiah station including construction of 2dn entry.
EL-G-SPJ-06-ET-25-26~ECR
EL-G-SPJ-06-ET-25-26
Open
Works - General
180 Days
Samastipur, Bihar
₹0
₹2.2 L
16 Jan 2026
24 Dec 2025
2 Jan 2026
133 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,46,56,289.61 | ||
| — | 415.00 | — | — | ||
| Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. copper cable/wire make - Havells, Finolex, Anchor,Polycab,KEI or similar. PVC pipe make - Malhotra, Bansal, Jyotiplast, Simplex or similar. | — | — | — | 1,86,828.85 | |
| — | 1040.00 | — | — | ||
| Wiring of sub-main Concealed/ surface ( Normally concealed) in heavy gauge 2 mm PVC conduit pipe with single core PVC insulated multi strand copper conductor cable 2 x 2.5 sq. mm multi strand (36/0.3 No./Nominal dia of wire in mm.) for phase and neutral and 1 X 2.5 Sq. mm cable for earth. The colour coding of cable red for phase, black for neutral and green for earth must be maintain .The rates per meter includes PVC pipe 1 meter length and 03 nos 1 meter copper wire with other accessories, if more than two wires are required to be drawn for other circuit than higher size pipes are to be used or separate pipe as required as per site requirement. copper cable/wire make - Havells, Finolex, Anchor,Polycab,KEI or similar. PVC pipe make - Malhotra, Bansal, Jyotiplast, Simplex or similar. | — | — | — | 78,052 | |
| — | 850.00 | — | — | ||
| wiring of sub main concealed / surface ( Normally concealed) in heavy gauge 2 mm PVC conduit pipe with single core PVC insulated multi strand copper conductor cable 2 x 4 sq. mm multi strand (56/0.3 No./Nominal dia of wire in mm.) for phase and neutral and 1 x 4 Sq. mm cable for earth. The colour coding of cable red for phase ,black for neutral and green for earth must be maintain. The rates per meter includes PVC pipe 01 meter length and 03 nos 1 meter copper wire with other accessories. If more than three wires are required to be drawn for other circuit than higher size pipes are to be used or separate pipe as required as per site requirement. copper cable make - Havells, Finolex, Anchor, Polycab,KEI', R R Kabel or similar. PVC pipe make - Malhotra, Bansal,Jyotiplast, Simplex or similar. | — | — | — | 73,346.5 | |
| — | 450.00 | — | — | ||
| Wiring for circuit/submain wiring alongwith earth wire with the 2x6 sq.mm +1x6 sq.mm earth wire of FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required. copper cable make - Havells, Finolex, Anchor, Polycab,KEI', R R Kabel or similar. PVC pipe make - Malhotra, Bansal,Jyotiplast, Simplex or similar. | — | — | — | 1,97,550 | |
| — | 600.00 | — | — | ||
| Wiring for circuit/submain wiring alongwith earth wire with the 2x10 sq.mm +1x6 sq.mm earth wire of FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required. copper cable make - Havells, Finolex, Anchor, Polycab,KEI', R R Kabel or similar. PVC pipe make - Malhotra, Bansal,Jyotiplast, Simplex or similar. | — | — | — | 3,42,000 | |
| — | 30.00 | — | — | ||
| Supplying and fixing of 15/16 A modular switch on the existing modular plate & switch box including connections but excluding modular etc. as required. Make - Havells,Anchor, Cona or similar. | — | — | — | 3,511.5 | |
| — | 30.00 | — | — | ||
| Supplying and fixing of 6 pin 15/16 A modular socket outlet on the existing modular plate & switch box including connections but excluding modular etc. as required. Make - Havells,Anchor, Cona or similar. | — | — | — | 4,434.3 | |
| — | 30.00 | — | — | ||
| Supplying and fixing 3 Module(100mmx75mm) ,GI box along with modular base& cover plate for modular switches in recess etc. as required. Make - Havells,Anchor, Cona or similar. | — | — | — | 7,360.5 | |
| — | 60.00 | — | — | ||
| Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3/5 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Make - Havells,Anchor, Cona or similar. | — | — | — | 21,474 | |
| — | 50.00 | — | — | ||
| Installation, testing, commissioning and Supply of 2x18 W LED (4 ft) indoor tube light fitting with LED tube voltage range 90v-300v AC. Wiring/ connection of fitting with not less than 1.5 sq.mm cu. Similar to Havells batten cat no. REGALBATTENTSUPTO2X22WSSBSWH and tube cat. no. PHOTONULTRAE2.01213T8SSTL18WLED865SPC. Wire through PVC flexible pipes. Fixing of fitting with aluminium. clamps and steel nut- bolts. Luminaire warranty period will be five years from the date of installation. Make of luminaire - Philips, Havells, Bajaj, Crompton,C&S or similar. | — | — | — | 56,274 | |
| — | 100.00 | — | — | ||
| Fixing, connection and supply of 36 W LED high performance 2x2 surface mounted luminaires which provides soft-light and glare free symmetrical illumination, Fixture size: (LxWxH) in (560x560x45) mm similar to Havells cat. no. : PLANOSUR2x2PLS36WLED840G2S including all accessories as per site requirement.Make of luminaire - Philips, Havells, Bajaj, Crompton, Greatwhite or similar. Luminaire warranty period will be five years from the date of installation. | — | — | — | 7,80,000 | |
| — | 25.00 | — | — | ||
| Installation, testing, commissioning and Supply of 20 W LED (4 ft) inverter LED batten with square profile and polycarbonate channel lithium ion battery with charging time 8 hours- 10 hours and back up time upto 4 hours indoor tube light fitting. Wiring/ connection of fitting with not less than 1.5 sq.mm cu. Similar to Havells cat no. LHEXACP7FN1W020. Wire through PVC flexible pipes. Fixing of fitting with aluminium clamps and steel nut- bolts. Luminaire warranty period will be five years from the date of installation. Make of luminaire - Philips, Havells, Bajaj, Crompton,C&S or similar. | — | — | — | 15,925 | |
| — | 50.00 | — | — | ||
| Fixing, connection and supply of 36 W LED 2x2 ft ultra slim recessed pannel similar to Havells cat. no. : VENUSNEO2X2PLR36WLED857G2 including all accessories as per site requirement. Make - Bajaj,Philips, Havells, Greatwhite or similar. Luminaire warranty period will be five years from the date of installation. | — | — | — | 3,15,000 | |
| — | 50.00 | — | — | ||
| Fixing, connection and supply of 18 W LED recessed mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver similar to Havells cat. no. : EDGEPRONEORDDLR18WLED840S including all accessories as per site requirement. Make of luminaire - Philips, Havells, Bajaj, Crompton, Greatwhite or similar. Luminaire warranty period will be five years from the date of installation. | — | — | — | 1,25,000 | |
| — | 50.00 | — | — | ||
| Fixing, connection and supply of 18 W LED surface mounted pressure die-cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver similar to Havells cat. no. : EDGESURFACERDDLR18WLED840S including all accessories as per site requirement. Make of luminaire - Philips, Havells, Bajaj, Crompton, Greatwhite or similar. Luminaire warranty period will be five years from the date of installation. | — | — | — | 1,50,000 | |
| — | 30.00 | — | — | ||
| Supply, installation, testing & fixing of 10 W LED 2 ft plastic batten with white acrylic cover, luminaire type BCLSB 10 WH to similar 20 Bajaj Havells, Halonis, Surya, Philips or similar. LED Luminaire warranty period will be five years. | — | — | — | 10,228.8 | |
| — | 1000.00 | — | — | ||
| Supply of LT XLPE 4x35 sqmm aluminium armoured cable. Make- Havells, KEI, RR Cables or similar. | — | — | — | 3,23,000 | |
| — | 1360.00 | — | — | ||
| Laying and fixing one no. XLPE/PVC Aluminium Conductor 1100 Volt grade of size exceeding 25 sq mm but not exceeding 120 sq mm on surface/wall/rail pole through GI pipe as per site required. (If cables will be supplied by Railway to contractor and transportation up to site shall be done by contractor.) | — | — | — | 27,553.6 | |
| — | 2720.00 | — | — | ||
| Laying and fixing of one number XLPE Cable 1100V grade of size exceeding 25 Sq.mm direct in ground one meter depth including excavation, sand cushioning ,and refilling to trench as required. (If cables will be supplied by Railway to contractor and transportation up to site shall be done by contractor.) | — | — | — | 1,20,414.4 | |
| — | 2720.00 | — | — | ||
| Laying of one no. additional PVC insulated and PVC sheathed/XLPE cable of 1100V grade up to 120 sq. mm direct in ground including excavation, sand cushioning protective covering and refilling of trench as required. (If cables will be supplied by Railway to contractor and transportation up to site shall be done by contractor.) | — | — | — | 65,307.2 | |
| — | 500.00 | — | — | ||
| Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of above 185 sq.mm and upto 400 sq.mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.(If cables will be supplied by Railway to contractor and transportation up to site shall be done by contractor.) | — | — | — | 2,37,000 | |
| — | 500.00 | — | — | ||
| Laying of one no. additional PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of above 185 sq.mm and upto 400 sq.mm size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.. (If cables will be supplied by Railway to contractor and transportation up to site shall be done by contractor.) | — | — | — | 1,78,000 | |
| — | 500.00 | — | — | ||
| Transportation of HDD machine with all accessories including handling of stores materials, preparation of site and boring for placing of 100 mm inner dia HDPE/DWC pipe for crossing of HT/LT XLPE cable together at Bridges/Culverts/Track/Pucca road crossing. Boring trench shall be minimum 3 mtr below the river bed and 1 mtr below Track/Road/Pucca Road crossing area. This includes supply of HDPE/DWC pipes and accessories as per requirement of site and cost of fuel & all other items which will be required for laying of cable through it. The work shall be executed as per instruction of site engineer. (a) Boring up to length 150 mtr. | — | — | — | 5,72,820 | |
| — | 40.00 | — | — | ||
| Fixing & Supply of 40W LED post top Lantern, Decorative Post Top LED light fitting,Spun aluminium housing,LED with clear diffuser, with integral driver and IP 66 protection similar to Transrail Model - TLL-PTALPDCANEMONE-40W, Make-Bajaj, Crompton, Havells, Philips and Transrail or similar. | — | — | — | 5,82,000 | |
| — | 40.00 | — | — | ||
| Fixing and supply of 3 mtr CI-CA-GI combo pole with PU paint on surface along with arrangement to mount post top lantern. Bajaj, Crompton, Havells, Philips and Transrail or similar. | — | — | — | 7,76,000 | |
| — | 40.00 | — | — | ||
| Fixing and supply of M16x400mm long TS-600 grade foundation bolts along with required templates for 3m pole. | — | — | — | 46,560 | |
| — | 50.00 | — | — | ||
| Supply and fixing of hot dip galvanised octagonal pole of over all length 6.0 mtr 70 mm top dia 135 mm bottom dia, pole sheet thickness 3 mm with accessories base plate dimensions: 200mmx 200mmx12mm. J type foundation bolts 4 no. Size M16x600, pitch circle dia 200 mm. bolt length 600 mm, single arm bracket 0.5 mtr length suitable for one no. luminaire with smart pack junction box with bakelite sheet, 6A MCB & internal wiring for terminal to fitting with 2x2.5 sq.mm cable of reputed make. Make - Bajaj, Transrail, Valmont or similar. | — | — | — | 5,94,000 | |
| — | 50.00 | — | — | ||
| Making of foundation suitable for 3 to 8 mtrs octagonal pole as per site incharge/4'X4'X4' manufacture dimension as per site requirement. | — | — | — | 2,47,500 | |
| — | 80.00 | — | — | ||
| Fixing and supply of LED street light 60 W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 on pole/wall with suitable size G.I. Pipe of medium gauge smooth bend with 120degree (2 feet + 1 feet) long, MS clamp, Nut bolt etc. as required, Kit-kat fuse 16amp in suitable size MS box should be provided with G.I. pipe. Wiring/ connection of fitting and kit-kat fuse will be done with not less than 2.5 sq.mm aluminium wire through G.I. pipes and PVC flexible pipes complete in all respect. Similar to Havells cat. no. ENDURAPEARLNEOSL60WLED757PASYTOPCAST. Make of Luminaire, Philips, Havells, Bajaj, Crompton or similar. LED Luminaire warranty period will be 05 years. | — | — | — | 5,94,000 | |
| — | 100.00 | — | — | ||
| Supply of Dynamic IC integrated Pixel RGB Lights Small sized pixel modules having diameter less than 30-40 mm 16 .7 million additive RGB colors.Completely water proof,suitable for outdoor application having IP rating IP65.Completely enclosed in transparent optical grade PVC material UV resistant grade Class 4,fire retardant grade V-0, Supports control by offline pixel controller (with SD card) to show RGB colors or with computer to perform online timely trasfer color patterns chasing colors etc. Safety approvals CE, FCC, UL Pixel controller supports 258-65538 level gray control Built-in LCD display to show controller parameters, Inbuilt provision for SD card so that programs/scenes can be changed easily Two or more controllers can be able to work property in cascade. Profile Size: L 1000 No of pixel P/meter 10 pixel Wattage: 7.2 W per meter Single pixel Wattage 0.72 W, input Voltage DC12V Light Angle: 120-180 Electrical Grade Class Ill. Protection Grade IP65, Flame Retardant Grade V-0. The Control Mode Serial control. Make - Philips/Orient/Havells/ Bajaj/Osram or similar. (Qty in Mtrs) (Warranty perios of 5 Years) | — | — | — | 6,74,054 | |
| — | 40.00 | — | — | ||
| Supply of 120W RGB LED Projector Lights fashionable and beautiful appearance High pressure die cast aluminum housing with plastic coated surface each LED with a rod for heat transfer,Control Mode DMX512 DMX Controller can achive 16.7M colors LEDs are protected with UV stabilized toughened glass on the front, Highly reliable DC 24V constant voltage power supply drives the RGB LEDS LED make seoul/CREE IP65 ingress protection power consumption 120W per foxture, Shell color grey/black beam angle 40-60 input voltage DC 24V power efficiency >85% power factor >0.9,operating frequency 50Hz output color RGB life span >50000 hours electrical safety class: Class 1. Make - Philips/Orient/Havells/Bajaj/Osram or similar. (Warranty period of 5 Years) | — | — | — | 10,53,960.8 | |
| — | 1.00 | — | — | ||
| Supply & Programming of DMX Controller system with standalone interfaces USB- DMX512 & 1024 channels, capability of windows XP/VISTA/MAC/LINUX with 32 bit CPU Technology To be installed in IP65 Waterproof junction box with necessary connections. Make - Philips/Orient/Havells/Bajaj/Osram or similar. (Warranty Period of 5 years) | — | — | — | 1,10,864.74 | |
| — | 15.00 | — | — | ||
| Supply of DMX Decoder with standard RDM remote divice management protocol support DMX 512 signal bi-directionally achieves remote management of reading and writing DMX address(DMX Master controller must recognize the RDM protocol) Equipped with DMX standard XLR 3 RJ45, green terminal interface. Realize 0-100% dimming or different lighting effect workable with single color bi-color or RGB LED lamps To be installed in IP65 waterproof junction box with necessary connections. Make - Philips/Orient/ Havells/Bajaj/Osram or similar. (Warranty Period of 5 Years). | — | — | — | 1,10,243.25 | |
| — | 20.00 | — | — | ||
| Supply of LED power repeater is suitable for all of our company's power- output power expansion it accepts PWM control the control quality of LED lights would be twice as much by adding one more power repeater unlimited quantity of power reapeater to be connected theoretically. Make - Philips/Orient/Havells/Bajaj/ Osram or similar. (Warranty Period of 5 Years). | — | — | — | 93,215.8 | |
| — | 15.00 | — | — | ||
| Supply of 100W DC24V constant volatage water proof IP65 power supply to power up decoders with necessary connections. Make - Philips/Orient/Havells/ Bajaj/Osram/ Meanwell or similar. (Warranty Period of 5 Years) | — | — | — | 27,591.9 | |
| — | 20.00 | — | — | ||
| Supply of 350W DC24V constant volatge waterproof IP65 power supply to light up RGB liner wall washer and RGB flood light with necessary connections. Make - Philips/Orient/ Havells/ Bajaj/Osram/Meanwell or similar. (Warranty Period of 5 Years) | — | — | — | 1,17,659.2 | |
| — | 1.00 | — | — | ||
| "Supply and installation of cables, Junction box, all lights, civil work, labour charge, etc for item no 30 to 36. " | — | — | — | 15,34,503.06 | |
| — | 40.00 | — | — | ||
| Provision of earthing with G.I. earth pipe 4.5 mtr long , 40 mm dia including accessories with charcoal and salt as required and providing masonary foundation work, watering arangement etc. Pipe make - Tata,Jindal, Bansal or similar. | — | — | — | 79,200 | |
| — | 40.00 | — | — | ||
| Providing and fixing 06 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/cable. | — | — | — | 356.4 | |
| — | 3.00 | — | — | ||
| "Supply, erection (with foundation/support structure), testing & commissioning of weather proof feeder pillar in position on suitable platform of brick masonary in 1:6 with neat finish cement plaster having suitable size of channels for mounting feeder pillar, the feeder pillar is to be fabricated out of 14 SWG CRCA sheet with powder coated painting and IP-55 class of insulationhaving hinged door and locking arrangement rubber gasket, extensible from both sides, suitable for 3 phase four wire 500 volts 50 HZ, in all respect and confirming to latest relevant ISI specification, of approved shape along with copper bus bars of suitable rating, nuts- bolts and washer dust vermin water proof including painting with primer, and two coats of approved shade including proper connection with suitable size of wire with all connecting materials, earthing making etc. complete as required with following mountings . (i) 200 A, 36 KA TPN MCCB 1 No., (ii) 100 A, 25 KA TPN MCCB 2 No. (iii) 63 A, 25 KA TPN MCCB 4 No., (iv) 32 A TPN MCB 2 No., (v) 32 A SPN MCB 2 No, (vi) 10/6 A SPN MCB 9 No., (vii) Micro Rex QT 31 Time switch 9 No. , with required size copper bus bar ,contactor ,insulator, indicating lamp and other measuring instrument including all connecting material etc as required. Make - Havells, L&T,ABB,Legrand or similar." | — | — | — | 3,61,950 | |
| — | 1.00 | — | — | ||
| Design, fabrication, installation, testing, commissioning & supply of cubical LT distribution Board/Panel fabricated(minimum size length 3.7mtr x Height 2.15mtr x thickness 1.0mtr.) with 14SWG cold rolled steel sheet supported on suitable MS angle/channel frame weided/screwed/nuts-bolts including equipped, fitted and connected to feeders/bus bars with ACB three pole 800A, breaking capacity 50kA-2 nos.COS four pole 1000Amp.-2nos., MCCB three pole 320Amp. breaking capacity 36kA-02nos, MCCB three pole 250Amp. ,breaking capacity 36kA- 06nos, MCCB three pole 125Amp. breaking capacity 35kA-04nos, MCCB three pole 80Amp. breking capacity 35kA-04nos, multi function energy meter-01 no., three phase ammeter-16nos ,CT ratio 1000/5Amp.- 03nos, CT-400/5Amp.-06nos, CT-300/5Amp.-18 nos & CT 200/5Amp. -24 nos, LED indication lamp for RYB Phase -17set(51nos), copper bus bar etc. The pedestal of angle iron frame shall be secured on floor by suitable grouting bolt and nuts. Each cubical of the panel shall have independent front opening of individual ACB, COS and MCCB and additional opening as per requirement. The panel shall have spray painted with one coat of red oxide as primer and two coats of super enamel paints. Nomencalature of each cubical shall be indicated on Al. foil (by screen priming process) duly revetted to front cover of cubical. Material which is required in fabrication, installation, testing,commissioning will be supplied by contractor. Work will be done as per instruction of site In- charge. Make-Havells, L&T,ABB,Legrand or similar. | — | — | — | 7,76,885.86 | |
| — | 15.00 | — | — | ||
| Installation, testing and commissioning of Split A.C. 1.5 ton/2 ton(indoor and out door unit both) from consignee to site including all accessories as per site requirement with proper tool and tecnique. | — | — | — | 67,425 | |
| — | 150.00 | — | — | ||
| Supply and Fixing of copper pipe of condenser coil during installation/ shifting of split AC1.5/2.0 ton capacity. | — | — | — | 14,898 | |
| — | 15.00 | — | — | ||
| Installation,testing, commissioning and supply of DBOXx MCB protected power unit 16/25 Amp. 240 volt with sheet steel enclosure 16/25A MCB DBOXx MCB protected power unit HSN Code: 8536. Make - Havells, L&T, Legrand or similar. | — | — | — | 9,924.75 | |
| — | 6.00 | — | — | ||
| Supplying and fixing 8 way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator) Make- Havells ,Anchor,Capital or similar. | — | — | — | 15,438 | |
| — | 4.00 | — | — | ||
| Supplying and fixing 16 way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.(But without MCB/RCCB/Isolator) Make- Havells ,Anchor,Capital or similar. | — | — | — | 12,564 | |
| — | 112.00 | — | — | ||
| Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make- Havells ,Anchor,Capital or similar. | — | — | — | 28,672 | |
| — | 4.00 | — | — | ||
| Installation, Testing, commissioning and supply of switch disconnector fuse unit capacity 100amp. 415 volt triple pole, neutral link with rewirable porcelain fuse units AC confirms to IS:13947(part I&III) in sheet steel enclosure similar to Havells cat. no. IHKDTW4100 Make- Havells, L&T, HPL, Suntex or similar. Switch will be installed/mounted on the pole/wall with MS Clalmp, bracket, Sheet, Nut bolt etc including masonry work if required and supply of all required material for fixing. | — | — | — | 22,509.64 | |
| — | 10.00 | — | — | ||
| "Installation, fixing,connection and supply of 63 amp. 4 way busbar chamber suitable for 3 phase with neutral. similar to Havells cat no. IHBC006304. Make- Havells ,Anchor,Capital or similar. " | — | — | — | 52,560.4 | |
| — | 4.00 | — | — | ||
| Installation, testing, commissioning and supply of Busbar chamber box 200 Amp 8 way suitable for 3 phase with neutral. Make - Havells,L&T,HPL or similar. | — | — | — | 31,870 | |
| — | 288.00 | — | — | ||
| Installation, testing, commissioning and fixing of 3D LED based name boards on ALP sheet of 3mm gauge thickness with projected alphabets of made of acrylic sheet in size of standard height as per space of alphabets with LED chip modular light. The work is including of erection of LED Board with minor modification on existing structure with required extra MS angle with painting of structure. Board in Hindi, English & Urdu. | — | — | — | 2,77,588.8 | |
| — | 2.00 | — | — | ||
| Supply of 11mtr high mast system totally hot dip galvanized having in One Section, Top dia 100mm, bottom dia 360mm and Sheet thickness 3mm, PCD - 445 MM, suitable for 50m/sec. wind velocity as per IS 875 Part 3 along with head frame, luminaries carriage suitable to install 06 nos. of luminaries in symmetrical arrangement and accessories required such as supply of raising lowering system of 11 M high mast comprising Single Gear Double drum (SGDD), 7/19 construction, 5mm diameter SS wire rope having Two Wire Rope System, trailing cable, connector, integral power tool motor, manual handle, junction box etc. Make-TRANSRAIL, Bajaj, Surya, Crompton, VALMONT or similar. | — | — | — | 1,27,584.58 | |
| — | 2.00 | — | — | ||
| Supply of foundation bolts M24 X 850 MM,TS 600, manufactured from special steel along with nuts, washers, anchor plates and templates. | — | — | — | 10,632.04 | |
| — | 12.00 | — | — | ||
| Fixing, connection and supply of LED Flood Light 250 Watt Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting. Similar to Bajaj GLEAM F 275L WH SY PC SD V2-113984 or Havells Cat no. JETAIRISMAXFL250WLED757PWBLTG. (LED Light Warranty will be five Years) Make- Philips, Havells, Bajaj, Crompton or similar. | — | — | — | 70,171.56 | |
| — | 2.00 | — | — | ||
| Supply of LED type single dome aviation obstruction light. Make-Transrail, Bajaj, Surya or similar. | — | — | — | 4,252.82 | |
| — | 2.00 | — | — | ||
| Supply of feeder panel comprising main incoming 32A TPN MCB, auto time switch, 25A TP contractor, reversing starter and protective system etc as required for operation of high mast system complete and raise lower push button, Incoming 35sq.mm and outgoing 16 & 2.5sq.mm terminals. Make- Havells, Anchor, HPL or similar. | — | — | — | 25,516.92 | |
| — | 2.00 | — | — | ||
| Construction of suitable shallow foundation with 1:2:4 concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sq mtr at 2 meter depth with all materials and labour. | — | — | — | 47,844.26 | |
| — | 2.00 | — | — | ||
| Erection of the high mast with the help of suitable tools and plants, wiring of luminaries with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5sq.mm, lugs, MCB and all labour. | — | — | — | 21,264.1 | |
| — | 2.00 | — | — | ||
| Installation of the outdoor stand mounted feeder pillar by grouting the stand in concrete. | — | — | — | 5,317.12 | |
| — | 432.00 | — | — | ||
| Fabrication as per site requirement and erection on pre erected steel tubular/rail pole/Cage for water cooler of MS Cross Arm bracket with nut bolt, clamp etc including supply of cross arm bracket Nut-bolt, clamp etc. | — | — | — | 32,832 | |
| — | 600.00 | — | — | ||
| Supplying and installing of 300 mm width X 62.5 mm depth X 2.0 mm thickness size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. Make- OBO, Leviton, Cope or similar. | — | — | — | 5,56,800 | |
| — | 10.00 | — | — | ||
| "Installation,testing, coommissioning and supply of 60 W (+/-10%) All in One LED Solar Street lights having extruded alluminium housing, 180Wp or more Mono Crystalline Panel/Laminates fixed on the top of the luminaire housing, maintenance free 12.8 volts 78 Ah or more LiFePO4 battery(BIS certified), BMS, MPPT charge controller, PIR sensor to provide 2 days (24 hrs) back up. The luminaire should have IP 65 protection for critical components, IK 07 and having lumen output of > 10000 lumen and having minimum lumen efficacy >160 lm/w as per LM 79 report of third party NABL lab to justify the lumen output & lumen efficacy. Lenses should be provided on the LED chip for better lighting dstribution to avoid glare on human eyes. Both the luminaire and Mono Crystalline Panel must be manufactured in India. The Solar lighting company must submit the third party NABL lab reports to justify the lumen efficacy, luminaire output, IK 07 and IP 65 protection. The Luminaire should be supplied along with adjustable type mounting bracket which can be fitted directly on the pole. The Solar Street light and solar panel having capacity of 180 Wp or more must be designed to take the wind load at 180 km/hr wind speed (As per wind load test report). The Solar lighting manufacturer must submit the declaration letter by mentioning that complete solar light and the solar panel are manufactured in India. and warranty certificate on their company's letterhead by mentioning warranty period as 5 years and necessary after sales service will be provided through their tollfree base service network. The following test reports(from 3rd party NABL accredited Lab) must be submitted for the technical acceptance of the products. 1.LM 79, 2. IK 07, 3. IP 65, 4. Wind load test report of AIO Street light having 180 Wp or more capacity Solar Mono Panel suitable for 180 km/hr wind Speed. Warranty - 5 years. Make- (Philips/Panasonic/Kaho/Wipro/Bajaj/Crompton or similar.)" | — | — | — | 9,45,000 | |
| — | 62.00 | — | — | ||
| Installation, connection, testing & commissioning of ceiling fan and regulator including all accessories as per site requirement. (Fan and regulator will be supplied by Railway.) | — | — | — | 1,043.46 | |
| — | 10.00 | — | — | ||
| Installation ,testing & commissioning of Exhaust fan with required material such as nut bolt, connection cable etc. as per instruction of site incharge. | — | — | — | 345.1 | |
| — | 2.00 | — | — | ||
| Installaion ,testing & commissioning of water cooler 150 ltr capacity with nut bolt with other accessories(inner pipe,outer pipe etc) as per requirement of site instruction of site charge. | — | — | — | 2,609.4 | |
| — | 4.00 | — | — | ||
| "Installation, testing, commissioning and supply of solar powered smart street light. PV Panel 200 WP, Pole- 07 Meter, Battery Capacity- LFP 12.8V, 100Ah, Solar Charge Controller- 12.8V/15A, LED Light- 24W, Surveillance Camera- PTZ Camera, LED Display- 32 inch LED Outdoor Display, Wi-Fi Hotspot- Next generation 5G connectivity speeds up to 1.6 Gbps, IoT Sensor- Environment sensors and other smart city sensors, Speaker- Public address system, Electric Charger- AC based 2W/3W chargers. Warranty - 5 years. Make- (Philips/Panasonic/Kaho/Wipro/Bajaj/Crompton or similar.)" | — | — | — | 6,00,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TDsecondentryBTH.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
CorrectionslipACS1to6.pdf
ATTACHMENT
annualturnoverformatCAVIB.pdf
ATTACHMENT
ANX-VVA.pdf
ATTACHMENT
Mandateform.pdf
ATTACHMENT
Letterofcredit.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .