Construction of Multipurpose Hall in Reddiyarpatti at Reddiyarpatti Panchayat of Palayamkottai Panchayat Union MP 2025-26

Construction of Multipurpose Hall in Reddiyarpatti at Reddiyarpatti Panchayat of Palayamkottai Panchayat Union.

EARTHWORK EXCAVATION for foundation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth in layers of not more than 15cm thick well rammed and conslidated and depositing the surplus earth within the compound in places shown by the departmental officers wth initial lead and lift etc including levelling the sites complete complying with standard specifications and as directed hard soil.

Collection and supply of sand and filling in to the basement including cost and conveyance to the siteand all labour charges for filling as per standard specifications

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof s Basement

Above Basement (Super Structure)

Brick work in CM 1:5 mix using country bricks ground moulded of size 83/4"x41/4"x21/4" for the following including curing etc., complete complying with standard specifications. Basement

Super Structure

Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing

Supplying and erecting centering shuttering including necessary supports for etc., complete. Basement

Above Basement (Super Structure)

Providing the floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc

White wash two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Colour wash painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Doors D1(1.20x2.10)m

Doors D1(0.75x2.10)m

Window W(1.20x1.30)m

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Labour Charges for Fixing the Doors inculding all Charges etc..

Labour Charges for Fixing the Steel Window inculding all Charges etc..

Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc.,

Indian water closet

PROVIDING ELETRIFICATION ARRANGEMENTS FOR ANGANVADI BUILDING Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick hylum sheet cover with TW Box and 5A FT switch with continuous earth connection of 14 SWG TC Wire for making good of the concealed portion with suitable colour for PVC open light poing / fan point for electronic regulator SD 24

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 37

Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7/20 Gibearer wire

Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRLS copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bend at both ends with necessary angle iron upright and end supports for mains. SD 70

Supply and fixing of WT bulk head fitting suitable with guard and 15 W (100W) LED bulb SD 85

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube SD 88

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 112

Supply and fixing of TNEB Meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1"x1/8"copper flat) on TW plank of size 375mmx300mmx19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40Amp 30 MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection SD 125

Supply and fixing of 15A aerial fuse unit (500A) on suitable100x100mm TW concealed box with hylem shee ton the tapping pole with necessary clamp. SD 130

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete.

Please Enable Macros to View BoQ information