REPAIR TO BRICK WORK, JOINERY, PAINTING, PLUMBING WORK, ROOFING, PATHWAYS, HARDSTANDING, WALLS, DRAINS, FENCING, SEWAGE CLEANING AND OTHER MISC REPAIRS IN RR UNITS OF 11 SECT UNDER GE (I) 873 EWS.

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete, but except brick, i.e. using serviceable bricks obtained from Serial Item No '01' here-in-before all as specified and as directed.

Brick work with sub-class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick, built in cement mortar 1:4, complete all as specified & directed.

Walling of random rubble stone masonry, well bonded, bedded and solidly hearted built in cement mortar 1:6, brought up to courses, complete all as specified and directed. Note : Volume of PCC bond stone shall be deducted from total cumulative quantity of stone masonry.

All as per the description of Serial Item No '05' here-in-before but except stones i.e. using serviceable stones obtained from Serial Item No '01' complete, all as specified and as directed.

Pre-cast cement concrete, 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in bond stone set in cement mortar 1:6 and finishing exposed surfaces including necessary form work, complete all as specified & directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm, complete all as specified & directed.

Raised pointing to squared rubble masonry, coursed or uncoursed in cement mortar 1:4, complete all as specified & directed.

Rendering 20mm thick in cement mortar 1:4 on stone masonry surfaces uncoursed or brought upto courses, finished even and fair without using extra cement, complete all as specified.

Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cills, lintels upto 1.5 metre clear span, steps, seismic and other similar band, plinth course, string courses, lacing courses, parapets and railing upto 60cm in height, copings, kneelers, apex stone, bed plates, kerbs etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form work complete, all as specified and as directed.

PVC (SWR) pipe 110mm bore single socketed in any length as in weep holes complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any descrition and in any position not otherwise specifically provided for, complete all as specified and directed.

Precast cement concrete 1:2:4 (nominal mix), type B-1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for manhole etc.), and similar articals with plain faces, set in cement mortar 1:4 complete all as specified & directed.

TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified & directed.

TMT bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified & directed.

Taking down cement plaster on bricks or stone wall/ceiling decayed surfaces of concrete from roof projection or RCC chajjas etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Rendering 15mm thick in cement mortar 1:6 on on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

Demolition of cement concrete in ground floors and paving (un-reinforced) not exceeding 15cm. thickness, below or above ground level, complete and removing rubbish from the site, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified.

25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base, finished even and fair to receive floor finishes, complete all as specified & directed.

100mm thick, plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floor, path, hardstanding etc. etc., finishing surface even and smooth without using extra cement including use and waste of formwork to divide the area into panels, complete as specified and directed.

Forming Contraction (Dummy) joints 100mm deep x 10mm wide, filled with sealing compound grade `A' all as specified and as directed.

Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

Non-skid cermic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.11 Square metre but not exceeding 0.18 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:4 complete all as specified.

Glazed ceramic coloured wall tiles in any type and in any pattern (Pattern consist of combination two or more different colour tiles etc.) in vertical surfaces of size 350mm x 450mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, finished fair to received the tile, complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, size of each slab not be less than 0.28 Square metre, including rubbing and mirror polishing complete over and including 20mm thick screed bed in CM 1:4, complete all as specified.

Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over and including 10 mm thick cement plaster in cement mortar 1:3 as backing coat rough finished surface, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing & complete all as specified & directed.

20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white ement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and as directed.

Factory made (rectified) precast concrete designer chequered tiles any colour, shape and size not less then 300mm x 300mm x 25mm thickness (compressive strength not less than 250 Kg/Sqm), pointed with grey cement and pigment over and including 20mm thick CM 1:4 screed bed or bedding layer complete.

Machine pressed precast concrete interlocking paver block 60mm thickness, M-35 grade conforming to IS-15658, any shade, colour and pattern laid over and including 20 to 30mm thick stone dust / sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles including budding and filleting joints etc. complete all as specified and directed.

Machine pressed precast concrete interlocking paver block 80mm thickness, M-40 grade conforming to IS-15658, any shade, colour and pattern laid over and including 20 to 30mm thick stone dust / sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles including budding and filleting joints etc. complete all as specified and directed.

Providing, cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges cement concrete complete all as specified and as directed.

Precast cement concrete block type B-1 (using 20mm graded aggregate) set in cement mortar 1:4 as in kerb stones etc. complete all as specified and as directed.

Taking down chowkhats with shutters (without taking off shutter from the frames) not exceeding 1.50 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good the disturbed surface complete all as specified and as directed.

Taking down shutter of any description, exceeding 1.00 Sqm and not exceeding 2.00 Sqm each all as specified and directed.

Taking down shutter of any description, exceeding 1.00 Sqm and not exceeding 2.00 Sqm each and refixing in the same opening complete, all as specified and directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 105mm x 60mm and made of 1.25mm thick MS sheet, complete all as specified and directed including necessary welding complete and including medium weight 03 No's of MS butt hinges of size 75mm / 100mm / 125mm and 01 No 50mm Size of medium weight MS butt hinge, complete all as specified and directed.

Pressed steel frame for door with one or more rebates including necessary lugs, fixing lugs hinges, lock strike plate etc. of size 125mm x 60mm and made of 1.25mm thick MS sheet, complete all as specified and directed including necessary welding complete and including medium weight 03 No's of MS butt hinges of size 75mm / 100mm / 125mm and 01 No 50mm Size of medium weight MS butt hinge, complete all as specified and directed.

PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) as in back filling of pressed steel frames and in bed block for holdfast etc. similar work etc. complete all as specified and directed.

35mm thick 2nd class Hard wood factory made rail and style plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed.

30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Steel windows with side hung shutter including projecting type hinges, steel handle 02 Nos., steel tower bolts 100mm long and steel peg stays lugs including hold fast complete with glazing bars dovetailed or welded including locking arrangement, complete all as specified and as directed.

Steel windows with side hung shutter including projecting type hinges, steel handle 02 Nos., steel tower bolts 100mm long and steel peg stays lugs including hold fast complete without glazing bars dovetailed or welded including locking arrangement, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified & directed.

Factory made solid panel PVC door / cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification in SSR Part-I.

Powder coated aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., (minimum thickness of powder coating 50 micron), complete all as specified & directed.

Powder coated aluminium door shutter, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos on each shutter, hinges, anodised aluminium snap beading screws etc., minimum thickness of powder coating 50 microns, complete all as specified, complete all as specified & directed.

Door closer aluminium die cast body, hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed in repairs complete all as specified and directed.

Butt hinges, medium weight, cold rolled mild steel, 100mm size, complete all as specified and directed.

Mild steel sliding door bolt, bolt type, stove enamelled black, with bright bolt not less 12mm dia, with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on stapple plate, 300mm long (ISI marked), complete all as specified.

Mild steel barrel tower bolts, stove enamelled black, with bright bolt, 150mm long (ISI marked), complete all as specified.

Mild steel pressed handle, oval type, stove enamelled black, 150mm long (ISI marked), complete all as specified.

Mild steel 150mm, ordinary rat tail rod pattern springs including roller and roller plate, fixed in repair, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, complete all as specified and directed.

3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and aperture 1.18mm and fixed with tinned tacks or galvanized wire staple, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.

Galvanised, corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs, 0.63mm thick, Gde-O quality, with 120grams/sqm zinc coating and Gde 'B' (i.e. 12.5 mm) corrugation complete, all as specified and as directed.

0.80mm thick plain, Galvanised, mild steel sheeting (ISI marked) grade 'O' with minimum 120grams/sqm for zinc coating in ridges, hips, valley gutters, drip, and straight flashings, fixed with coach screws and washers complete, all as specified and as directed.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.

Dismantling unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified and as directed.

2nd class hardwood in scantling wrought timber framed and fixed complete all as specified and directed.

Mild steel rolled work as in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to Fe-410-W (Gde-E-250) quality-B complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and as directed.

4mm thick non asbestos fibre cement building boards laid / inserted to GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40mm x 30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and scrwed at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.20 metre length) of 0.55 mm thickness having kurled web of 50mm and flanged of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457 mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed.

12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work all as specified and directed.

6mm thick, Veneered decorative plywood, 5 nos of ply, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work complete all as specified and directed.

6mm thick, plywood, 5 nos of ply, grade 1 (with BWR resin); fixed with nails to timber frame work as in walls / ceilings flat or sloping complete all as specified and directed.

2nd class softwood plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face, sectional area exceeding 03 Sqcm but not exceeding 06 Sqcm complete all as specified and as directed.

2nd class softwood plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm complete all as specified and as directed.

5mm thick colour Prelam PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site, complete all as specified and as directed.

5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity including taking down old tank complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity including taking down old tank complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Fixing only old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 15mm dia complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, fixed in repair, complete all as specified and as directed.

Bib tap cast copper alloy CP, fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, fixed in repair, complete all as specified and directed.

Stop valve CP, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, fixed in repair, complete all as specified and directed.

Stop valve, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 20mm bore iron pipe or for unions, fixed in repair, complete all as specified and directed.

Vitreous china wash hand basin 550 x 400mm, white flat back including cast iron bracket, cutting for and pinning the ends of brackets or erecting on stand including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length, complete all as specified and as directed.

Vitreous china wash down water closet pan (pedestal pattern) white, including ‘P’ or ‘S’ trap, white seat cover with flat bottom and mild steel CP hinging device, CP brass jet nozzle with 1500 mm long PVC pipe, fixed in repairs, complete all as specified and directed.

Vitreous china Orissa pan of pattern, long pan size 580mm x 440mm, with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe, fixed in repairs complete all as specified and directed.

10 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

Plastic water closet seat cover, white/ black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixed in repairs, complete all as specified and directed.

Flush pipe of PVC 32MM dia for Low level cistern, complete all as specified and as directed.

PVC connection 600mm long fitted with PTMT nut and washer on both ends, fixed to 15mm bore iron pipes, complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed wares, AC or reinforced concrete) 150mm dia set in cement mortar, complete all as specified and directed.

Concrete bed to drain pipes including packing under and haunching against the sides of pipes and tested; in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate for 150mm dia bore pipes all as per SSR Part-I specifications, complete all as specified and directed.

Salt-glazed stone ware (SGSW) grade-A drain pipes 150mm bore laid and jointed in concrete bed complete including testing etc. all as specified and directed as per SSR Part-I specifications, complete all as specified and directed.

PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in surface channels and drains including necessary formwork, complete all as specified and directed.

Cleaning the blockage in IWC, EWC including rodding of CI pipe after opening the oval access door of CI bend, chamber etc. upto septic tank and including replacing the chamber cover etc. in position and removing the rubbish to a distance not exceeding 50mtr outside cantonment complete all as specified and directed.

Desludging / dewatering / pumping/ bailing out of contaminated water including cleaning of sludge, scum, silt (both organic and inorganic nature) and night soil from septic tank/soakage wells alongwith inlet / outlet chambers, manholes, soakage pits etc. of any capacity after plugging the incoming sewage lines by suction (vaccum) type machine mounted on LCV facility of high pressure vaccum including removing the contaminated water in same tank to a place outside cantonment to a distance exceeding 50 mtr but not exceeding 100 mtr and burying in pits including rough excavation of pits and carriage of sludge to pits including spreading well in pits after burying of sludge, covering the pits with 25cm thick layer of earth and spreading bleaching powder over the covered area, complete all as specified & directed.

Preparation new plastered or previously untreated surfaces of walls and applying three coats of white wash , complete all as specified and directed.

Preparation old plastered surfaces of walls including brooming down or steel wire brushing, scrapping down smoke, soot, mould, moss and efflorescent salts and treating oil and greasy spot, applying one coat of cement base paint, complete all as specified and directed.

Preparation new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed.

Preparation old plastered surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.

Preparation of old steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

M/S MAQBOOL AHMED BHAT

AKSHAY CONSTRUCTION COMPANY

Bidder Name

AKSHAY CONSTRUCTION COMPANY

M S BANSI LAL CONSTRUCTION CO

M/S MAQBOOL AHMED BHAT