8142-welcome-maintenance

Amount

M&L Non skid coloured ceramic tiles each tile area (square/ rectangle) exc 0.11Sqm but not exceeding 0.18Sqm tile thickness 7 to 8 mm, as in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer with CM 1:6 15mm thick for laying floor finishes and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified.and as directed .

M&L Glazed ceramic tiles coloured 300x 200x 5 to 6mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.including 10mm thick in CM 1:4 as backing coat for fixing dado tiles and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified. all as specified.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc.& making good, cutting not exc 10 cm girth

S&F tubing, medium grade, galvanised, 15 mm bore with all fittings; fixed to walls and ceilings or laid in floors complete including taking down GI water tubing and connections and taken in to schedule of credit all as specified and as directed

All as per item No.4 hereinbefore but of 20mm bore

M&L fixed in repairs vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, seat cover etc, complete all as specified and as directed

M&L fixed in repairs vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor all as specified and as directed

M&L fixed in repairs vitreous China wash basin, white, flat back, size 550x400mm incl 32mm Waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement all as specified and as directed

M&L fixed in repairs 10 liters capacity PVC low level flushing cistern complete with ISI marked body and ISI marked syphon all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm all as directed

S&F in repair Bib cock long body with flange fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed all as specified. Make: Prayag cat part No 6508 or equivalent

S&F in repair Hand Shower (Health Faucet) Chrome Plated with1.5 Meter Long Flexible Tube & Wall Hook. Make :Prayag Cat No BEA40 or equivalent.

S&F fix in repair fancy type chromium plated Angular stop cock long body. Make: :Prayag Cat No PR-244 or equivalent.equivalent

S&F Bib cock two way double Handle with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed all as specified Add fixed in repairs . Make: Prayag Cat No 8312 or equivalent

S&F in repair CP wall mixer 3 in 1 for mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe. Make : Prayag cat part no-7680 Metro or equivalent

S&F in repair sink taps, chromium plated, screwed down, high pressure, with or without lettered with long screwed shanks and fly nuts, screwed for 15 mm bore . Make : Prayag, Metro or equivalent

S&F kitchen plate rack made stainless steel 0.80mm thick complete of size not less than 24x36x10 inch, duly assembled and fixed to wall with wall screws / fasteners all as specified and directed. Make: Prayag cat part No P-340 or equivalent

S&F in repair Pillar taps, chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore. Make: Prayag cat part No 6602

S&F curtain rod (Drapery rods) powder coated decorative finals of ABS plastic and insulation brackets of GI steel, including brackets, with fixing in repair. Make VISTA Levolor or equivalent

S&Fcorner glass self 300 mm (with ABS Brackets) 300x600 Make- Prayag Cat No BEA-46 or equivalent

S&F Chromium plated soap dish for fixing to wall . Make- Prayag Cat No BA-5S or equivalent

S&F PVC mirror cabinets of size400x500 mm, fixed with coatch screws and rawal plug. Make : Prayag Cat part No 554 or Supreme, Swastic.

M & L Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

Rounding to edges of stones slab one edge, such as in steps, cooking plate form, and other similar situation

S&F Towel rail 600mm long & including Chromium plated brass screws & wooden / plastic cleats (Minimum weight 190gms)

S&F in repairs Chromium plated 125mm shower roses with or without swivel joints, any size, including fixing to steel pipe or union .

S&F in repairs, sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm .

S&F in repairs 32mm Bore dia of discharge pipe of Bottle trap of PTMT having minimum water seal of 25mm (Minimum weight seal of 25mm. (Minimum weight 32mm-260gms)

S&F in repairs 32mm Low density (outer diameter of pipe) polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete concealed to walls, ceiling or in floors etc.

S&F PVC gully trap with cover of size 125mm fixed in repairs including PCC bed complete all as directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S & F PTMT floor grating 140 mm dia, fixed in repair.

S & F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber rings, joints laid on wall all as specified and as directed.

All as per item No.34 hereinbefore but of 110 mm bore

S & F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber rings, joints laid in trenches or in floors all as specified and as directed.

S&F in repairs. PVC (SWR) bends any radius 75 mm bore with acess door

All as per item No.37 hereinbefore but of 110 mm bore

S & F 75 mm PVC (SWR) junction single,(Single T) equal or unequal

All as per item No.39 hereinbefore but of 110 mm

S&F in repairs. PVC (SWR) branch piece,110 mm bore single (single Y) equal or unequal.

S&F in repairs. PVC vent cowl 110mm dia

Taking down chowkats or frames with shutters (without taking off shutters from frames) n exc. 1.5 Sqm each including making good disturbed surfaces all as specifid.

Taking down shutters of any description n exc 1 Sqm each all as specifid.

S&F in repairs Perlaminated particle boards, 18mm thick interior grade perlaminated one side with decorative choice lamination & other side balancing white lamination fixed as in cup board shutters/shelves andpelmet boxes.

Material and labour 6mm thick teak wood lipping for external of 18/19 thckness of board

S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised

S&F Solid PVC Frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling &fixing in opening as per spcification &drawing Note:- i)Existing wall edges will have to be finished properly in cement plaster 1:4 . including fixing of 6 Nos wooden plugs for catch door frame size not exc 17 Sq cm average sectional areas and 100mm long. ( ii) Frame will have to be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS screw, 3 each on either side. (iii) PCC strip of section 5*5mm will have to be created at bottom incl. smooth finish in each door opening.

S&F Factory Made Solid PVC Moulded Door Shutter with partical board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S&Fin repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed withn wooden beading or with nuts and bolts to existing steel windows/wooden windows

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S & F in repair Sheet glass, 4 mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

M&L Aluminium alloy, anodized, 250mm sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed

S&F 150mm Floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor

Supply and fix shutter, hooks & eyes Alluminium, 150mm

Preparing plastered or unplastered old decorated surfaces by brooming down or steel wire brushing down smoke dust mould moss and efflourescent staff and trading oil and greasy spot and applying one coat of of white wash complete.

Preparation of old decorated plastered or unplastered ceiling surfaces and applying one coat of white wash complete.

Preparation of old decorated plastered or unplastered wall surfaces and applying one coat of distempering with oil bound distember white or tinted complete.

Preparation of old decorated plastered or unplastered wall surfaces and applying one coat of cement base paint white or tinted complete.

Preparation of old painted wooden surfaces of any description over 10 cms width or girth not otherwise discribed and applying one coat of synthetic enamel paint complete.

Preparation of old painted steel surfaces of any description over 10 cms width or girth not otherwise discribed and applying one coat of synthetic enamel paint complete.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even and smooth with out using extra cement including taking down cement or cement lime plaster, on brick or stone walls/ceiling, etc. & raking out joints, hacking for key, scrubbing down with water, etc.any description

Rendering 5 mm thick on fair faces of concrete surfaces on ceiling CM 1:3 fair finished even and smooth without using extra cement, Incl three coats of white wash to match the existing surface including taking down cement or cement lime plaster, on brick or stone walls/ceiling, etc. & raking out joints, hacking for key, scrubbing down with water, etc.any description

Preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and as directed by Engineer-in-Charge.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished fair and even and smooth with out using extra cement all as specified and as directed.

Preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of Chalk whiting primer on external surfaces of walls all as specified and directed.

S & F in repair Galvanized 2 strand barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised MS wire staples or steel pins etc as directed.

M&L providing PCC1:2:4, type B1 using 20mm graded stone aggregate as in cover slabs and setting in Cement Mortar 1:6 complete with joints to match all as specified.

M&L for Mild steel TMT bars 10mm dia and over of grade Fe 500, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming all as specified.

Dismantling of 100mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required

M/S CLIMATE CONTROLS