SPECIAL REPAIR TO B R STRUCTURE INTHEPREMISES OF AUDITORIUM COMPLAX AT MILIT

Amount

External Services : Part I Excavation in trenches not exc 1.50mtr wide and not exc 1.50mtr in depth for foundation etc and getting out in soft / loose soil.

Dismantling of framed wooden post, rafters, purlins etc. under 40sqcm in section complete.

Dismantling single layer manglore pattern tiles in roofing complete.

Demolition of brick work/block masonry or stone/boulder masonry, built in cement mortar complete.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for

Demolition of cement concrete (unreinforced) in ground floors and pavings exc. 15cm thickness.

M&L for Hardcore of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick watered and rammed with 10 to 12 tonne roller upto a true surface complete.

M&L for 75 mm thick cement concrete 1:4:8 type B1 using 40 mm graded stone aggregate as in sub base.

M&L for sand cushioning below paver block as specified and directed.

M & L for machine made Rubber moulded precast concrete interlocking paver block (coloured), Glossy finish pre polished of any shape and size with white cement and pigment confirming to IS 15658-2006 of 60mm thickness M-35 Grade complete all as specified and directed.

M&L for factory made rubber moulded, glossy finish pre polished (coloured) cement concrete type B1,1:2:4 (20mm graded stone aggregate) of size 30cm x 10cm as in kerb, bed block, mud stop, slightly rounded or champhered on edges, coping, complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete all as specified and directed.

Returning filling in, well watering ramming in layers not exceeding 15cm thick complete all as directed.

Removing of excavated soil to a distance not exc. 50mtr and depositing where directed above the starting point complete all as specified and directed by Engr-in-charge.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6, complete.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.

Rendering 15mm thick on brick/block or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth without using extra cement, complete all as specified.

M&L for two coats of external acrylic (100%) waterproof emulsion paint Apex Ultima or equivalent complete all as specified and directed over a coat of alkali resistant primer on new plastered surfaces of wall including necessary scaffolding required for painting work, safety measures etc.

Excavating in post holes (or similar holes) each n.exc 0.50 cum getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in hard/dense soil.

S&F Powder coated sturctural steel work, thickness of powder coating not less than 100micron as in cantilever, post, framework, rail including special shaped washer, nut and bolt etc. complete using ERW or induction butt welded circular/square/rectangular pipes including necessary cutting, welding, colour of powder coating as per approved by GE complete all as specified and directed by Engr-in-Charge.

M&L for Two coats of synthetic enamel paint over a coat of red oxide on new or old steel surfaces exc 10 cm width or girth etc.

M&L for rubber moulded glossy finish, pre polished (coloured) chequered cement concrete tiles 30cm x 30cm x 25mm thick, set and jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 complete.

M & L for granite 18mm thick of any colour and any type work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S&F Pre-painted coloured galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/Chajja/cladding to wall, height upto 10mtr from floor level fixed with self tapping screws/'J' hook as directed by Engr-in-Charge and colour of sheet to be prior approval from GE.

S&F Pre-painted coloured galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/Chajja/cladding to wall/roof gutters,spigot/socket height upto 13mtr from floor level fixed with self tapping screws/'J' hook including necessary welding/cutting as in roof gutters all as directed by Engr-in-Charge and colour of sheet to be prior approval from GE.

M&L for Nominal Mix RCC B-1 (1:2:4) 20mm graded aggregate as in slabs supported on walls, chajja, Roof beam, roofs , canopies, shelves & the like.

M&L formwork to soffits of suspended slab such as roof slabs , chajja, floor slabs, shelve, landings and similar works n.exc 200 mm thick (horizontal or sloping)

Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incfluding cranking, bendidng etc and binding with and includidng mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified.

M & L for cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick.

M&L vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in floors etc and joineted neat in cement slurry and pointed in white or colour cement to match over 15mm thick screed bed in CM 1:6 .

M&L vitrified coloured glazed ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqm in skirting/vertical surfaces etc. and joineted neat in cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM 1:4 .

M&L for mild steel angles as in frame work, including cutting, welding as per site required shape as directed incl drilling holes, notching for wire etc conforming to Fe-410W (Gde E-250) etc of any description complete all as specified.

S&F welded steel wire fabric weight not exc. 4kg per Square metre fixed to steel member complete all as directed by Engr-in-Charge.

M&L for 150mm thick PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in flooring laid in alternate bay finished even and smooth without using extra cement including construction joint at each 2mtr interval. The Joint shall be filled with Grade 'B' sealing compound (to full depth) complete all as specified and as directed by Engr-in-charge.

M&L for forming construction joints 65mm deep x 20mm wide filled with Grade 'B' sealing compound including removal of existing sealing compound and preparation of old joints complete all as specified and directed by Engr-in-Charge.

M&L for two coats of Apex floor guard acrylic plastic emulsion paint to concrete surfaces including preparation of old concrete surface and priming paint plaster coat complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type C-2 1:3:6 (40mm graded aggregate) as in surface channels and drains including necessary form work for drain in vertical surfaces complete.

Extra for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred /stopped ends etc.

M&L for Shahabad or similar stone slab 25 mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 120cm as in copings, vertical/horizontal surfaces of rain water drain, chajjas, sunshades, footpath, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in mortar 1:4 complete all as directed by Engr-in-Charge.

M&L for concrete bed to drain pipes including pipes under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 450mm dia pipe.

M&L for Reinforced concrete pipes 450mm dia, class NP-2, laid and jointed complete including collars all as specified and directed by Engr-in-Charge.

M&L for mild steel framed work such as grills, gratings etc. with ends of bars shouldered or riveted or gorged into spikes framed guard bars barred iron ladders framed balusters, walk ways, railing, frame work for water tank and similar work conforming to Fe-290 Gde E-165 complete all as specified.

M&L for 304 grade stainless steel work as in bolards/railing with steel chain including base plate for bollards including fixing of stainless steel chain to bollards/railing with hooks complete all as specified and directed by Engr-in-Charge.

M&Lfor 150mm internal dia soil glazed stoneware drain pipe laid in trenches and jointed as specified.

M&L PCC 1:3:6 type C2 as in concrete bed to drain pipes of dia 150mm including packing under, and haunching against the side of pipes after they are laid and tested.

S&F for steel water tubes, 20mm bore medium grade, galvanized with all fittings and fixed complete to walls, ceiling or laid in floor, complete including taking up or down steel tubing and connections or removal to store all as specified & directed.

All as per item no 46 here in before but 15mm bore.

S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall, floor including necessary iron clips complete.

S&F 110mm dia PVC bends complete.

S&F 110mm dia PVC (SWR) vent cowl complete.

S&F for PVC (SWR) floor trap dia 110mm with CP grating including jointing to waste pipe with and including run lead joint.

Minor work Part -II S&F anodized aluminium powder coated of any colour (thickness of powder coating not less than 50 micron), in frame for door, partition wall etc. with one or more rebates, shutters, grills including joining cleat, glazing clips, rubber packing anodised aluminium snap for fixing glass, 12mm thick particle board etc. complete all as specified. (Jindal Section No 20048=0.942 Kg/M for door frame, Glazing Clip 19370=0.109 kG/M, Partiiton section 14066= 1.345 Kg/Rm).

S&F anodized aluminium door shutters aluminium section weighing not less than 0.55kg/m including necessary joining cleat glazing clip, rubber neoprene packing, handles 2 no in each door, hinges, anodised aluminium snap beading screws etc complete all as specified. including Powder coating of any colour (Thickness of powder coating not less than 50 Micorn).

M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete. Make :- Godrej, Hettich.

M&L for solar control film 25micorn relfective type sticked to glass panes as per insturction of manufactureres

J.G.Goel

M/S V C SHETH

Samyak Engineers

SUN Enterprises

M/S Narendra Construction