Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAccepted-AOC BAPPA CONSTRUCTION BINPUR JHARGRAM | BINPUR | JHARGRAM | WEST BENGAL | 721514 | L1 | Accepted-AOC work has been done | |
| 2 | L2₹4.3 L+₹95,526 (28.8%)Rejected-Finance HABIBPUR KOTWALI PASCHIM MEDINIPUR 721101 | KOTWALI | PASCHIM MEDINIPUR | WEST BENGAL | 721101 | L2 | Rejected-Finance Bidder is not L1 | |
| 3 | L3₹5.0 L+₹1.7 L (50.9%)Rejected-Finance AT G 2 BIDHAN NAGAR PO MEDINIPUR PS KOTWALI PASCHIM MEDINIPUR 721101 | MEDINIPUR | PASCHIM MEDINIPUR | WEST BENGAL | 721101 | L3 | Rejected-Finance Bidder is not L1 | |
| 4 | Rejected-Technical 221 3 SALT LAKE SECTOR II KOLKATA 700091 | KOLKATA | KOLKATA | WEST BENGAL | 700091 | - | Rejected-Technical The participated bidder is technically not qualified,due to the self-attested hard copies of all uploaded documents has been not submited his end as asked on email dated 03.08.2023 |
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
25 Jul 2023, 1:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE
OFFICE OF THE EXECUTIVE ENGINEER JHARGRAM ELECTRICAL DIVISION, P.W.Dte. Panch Matha More, PWD Building, Opposite Rabindra Park, Dist. Jhargram, Pin- 721507
Electrical Installation work for newly extensioned shed including Compound light at Bengal Archery Academy
2023_WBPWD_547198_1
WBPWD/EE/JED/eNIQ12/2023-24
Open Tender
ELECTRICAL WORKS ORG
Item Rate
7 days
JHARGRAM
Please refer Tender documents.
3 documents required · 3 mandatory
₹10,000
13 Sept 2024
18 Jul 2023
27 Jul 2023
18 Jul 2023
25 Jul 2023
18 Jul 2023
Amount
Supply & Delivery of 9 Mtr Steel Tubular Pole (Zindal /Bansal) as per specification Type 410 SP -32 as overall length 9 mtr weight 154kg. with fixing the base plate and GI earth bolt after making drilled holes etc. on pole incl. jacketing arrangement with structured arm bracket if reqd as per direction of EIC
Erection of Single Steel tubular pole of 9 mtr. length with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly as per GS
Extra, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box
Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below,Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1)after dismantling the damaged looping cable box etc. where necy. incl. painting(200 x 150 x 100mm)
Painting of Steel Tubular Pole of 9 mtr length and no. of coats of paint, with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9 mtr. long pole i)1st coat of synthetic paint over 1 coat of RO priming, ii)2nd coat of synthetic paint over 1st coat
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level(ISI-Medium)
Excavation of soil for installation of Earth Electrode and filling & ramming.(morrum soil)
Connecting the equipment to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipment with bolts, nuts, washers, cable lugs etc. as required and mending good damages
No. 4 SWG
Supply and Fixing of 250V, 135W LED outdoor floodlight luminaire on head of pole with suitable and necessary arrangements incl. connetion.( Make: CG cat no.LFLN-135-WW/60-M OF White colour light /Philips/magik)
S& drawing from loop box to fitting by 3x1.5 sq. mm PVC insulated copper wire (Finolex 'FR') through MPVC/3mm thick Polythene pipe.
supply only 2core 16sqmm pvc insulated AL/Armoured LT cable (make-gloster/polycab/kei)
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed
2 core 16 sqmm
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below
2 core 16 sqmm
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :
2 core 16 sqmm
Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required.
40 mm dia
E.I. Work FOR SHED
S&fixing 250 v 6 to 10 A per way , SPNMCBD (607713) with SS enclosure double door with IP - 42/43 protection with 40A DP MCB Isolator as incomer and 16 no 6-32A SP MCB (C - Curve 10 kA) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl interconnection with suitable size of cupper wire & neutral link & provision of earthing attachment.. (Make: Legrand/l&t/siemens) 2+ 16 way.
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]
Average run 10 mtr)
Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish (on board)
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required
3 x 22/0.3 (1.5 sqmm)
2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC
2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC
Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.
Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.
Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.
supply of the following items
40W LED tube [Make – Phillips cat no.-BN021 LED 40S-6500 PSU GR )
Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)
S &D of AC celing fan. (Make -Usha STRIKER 1 STAR (Safety Wire & S3 / P2 Capacitor)/Equivalent model of Orient/ Crompton Greaves ]
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.
Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. Making necy. connections etc
Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required
KORUNAMOYEE ENTERPRISE
M/S JOGMAYA ENTERPRISE
technical_1141028.pdf
PDF • 0.52 MB
techsummary_1141028.pdf
PDF • 0.14 MB
finance_1141028.pdf
PDF • 0.36 MB
BOQ Comparative Chart
xlsx • 0.01 MB
finsummary_1141028.pdf
PDF • 0.14 MB
bappa12139.pdf
PDF • 0.70 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .