Construction of Sports Infrastructure in campus of Munshi Singh College at Motihari Dist- East Champaran.

GRASS PLANNING: PROPER GRASS PLANNING (BERMUDA GRASS ) FORPITCH .WE PROVIDE THREE MONTH MAINTENANCE FOR GRASS DEVELOPMENT LIKE : PROPER CUTTING,WATERING,SPREADING OF FERTILIZERS ETC

Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead

1:1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

1:2:4 (1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

All work upto plinth level : Concrete of M-25 grade with minimum cement content of 330 kg/cum

All work above Plinth level upto floor V Level : Concrete of M-25 grade with minimum cement content of 330 kg/cum

TMTC-500- 08 mm dia.

TMTC-500- 10 mm dia.

TMTC-500- 12 mm dia.

TMTC-500- 16 mm dia.

TMTC-500- 20 mm dia.

TMTC-500- 25 mm dia.

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roots, landings, balcnies and access platform..

Lintels, beams, plinth bams, griders, bressumers and contilevers.

Columns,Pillars, Piers, Abutments, Posts and Struts

Edges of slabs and breaks in floors and walls :

Weather shade,Chajjas, corbels etc. including edges

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete

1:3 (1 cement:3 coarse sand)

1:6(1 cement: 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix : (1 : 4)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats)

Fixed to steel windows by welding

Fixed to openings/ wooden frames with rawl plugs screws etc

Supply and fixing of Flashing /Ridge/ and gable flashing colour coated up to : Supply and fixing of Flashing /Ridge/ and gable flashing colour coated up to : 300mm - 500 mm girth.

Providing & Fixing GE plastic 600mm dia Turbo Vents of approved make and laying in position as per drawing or as directed by Engineer-in-charge

Providing & Fixing clear polycarbonate sheet 1000 mm wide & 1.5 mm thick of approved make and laying in position as per drawings matching profile with galvalium sheet or as directed by Engineer-in-charge

Supply and fixing of Colour coated gutters with gutter supports, sealnts

Supply and Fixing of down Color coated 0.5mm thk. Sheet take pipe, Pipe flashing band, M.S strip U-clamp with complete accessories in color coated sheet.

Providing and fixing soil, waste and vent pipes : Sand cast iron S&S pipe as per IS: 1729

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5

Geo Textile to prevent ingress of soil

Providing and laying World Athletics Approved Prviding and laying World Athletics Approved Synthetic Athletics Track FULL PUR FULL EPDM SYSTEM of 15mm thickness with combination of SBR granules, PU and EPDM laid using paver machine which should Include "WA" Standard marking on the surface all complete as per requirements/ specification laid dawn by "WA" Class-1 certification and as per direction of the Engineer - in - charge. The bidder in its name should have experience of successfully completing at least 2 WA/IAAF certified Synthetic Athletics Track with sub base in last 5 years in India..

Mixing earth and sjudge or manure in porportion specified or directed.

Spreadingof sludge,dumpmanureor/andgoodearth inrequired thickness (Cost of sludge,dumpmanureor/andgoodearth tobe paid separately).

Supply and installation of fully computerized, automatic and single key operation pop-up sprinkler system " for surfaces including all fittings and accessories, 110 mm dia HDPE Pipe, 50 HP motor (KIRLOSKER) automatic panel, hydrant etc., fulfilling irrigation norms

Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931

Providing and fixing gun metal non- return valve of approved quality (screwed end)

Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1(1 cement: 1 fine sand) including testing of joints etc. complete.

Providing and fixing square-mouth S.W gully trap grade 'A' complete with C.I grating brick masonry chamber with water tight C.I cover with frame of 300x300mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Providing and laying non-pressure NP2 class (light duty) R.CC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2( 1 cement: 2 fine sand) including testing of joints etc. complete.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

S/F/F 1 H.P. Cromption or any other apprioved make Motor and ISI make automatic starter mounted on a common wooden board etc. all complete job.

S/F/F 2 H.P. Cromption or any other apprioved make Motor and ISI make automatic starter mounted on a common wooden board etc. all complete job.

Supplying and fixing PVC/G.I box of 200mm x 250mm x 60mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required.

Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required.

Supply and Installation of 300 mm 230volt AC exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required.

Supplying and fixing recess/surface mounted 23/24 (1ft X 1ft) watt LED downlighter complete with integrated electronic driver & LED directly on ceiling/false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required.

300 sq. mm, 3.5 core

95 sq. mm, 3.5 core

SITC of high-quality integrated LED Flood Light with a minimum system lumen of 70K Lm and system wattage not exceeding 500W(+5%) with a minimum efficiency 140 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI : 70. The housing should be of non-corrosive high-pressure die-cast aluminum to with stand extreme environments. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. with PF > 0.95. Lifetime of 75K hours @L70. Product should be suitable for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP 66 with an IK rating of 08. Optical and control gear compartments shall be maintainable/replaceable without impacting the LED units. The access to the optical and the gear compartment should be separate. While accessing the gear compartment, the optical compartment should not be accessible. The Luminaire should have a 20 KV /10 KA SPD duly bolted in the Luminaire. The SPD should be able to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The Luminaire should have a breather to ensure that air balance inside and outside of the Compartment .The luminaire should be of Class B Serviceability. The wattage of each LED should be greater than 1 watt and less than 3 Watt. Only high power Single white LED chip with ceramic based suitable for outdoor use is allowed. Multi Chip, array multi die, mid power, Integrated arrays and COB’s are not permitted. The High power LED used in the luminaire shall be SMD type only of make LGIT, Lumileds, Osram, Nichia, and CREE & no other make. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. The luminaires should have a breather ensuring a stable optical and thermal management. The weight of the luminaire should not be more than 12 Kg.

SITC of high-quality integrated LED Flood Light with a minimum system lumen of 74K Lm and system wattage not exceeding 500W(+5%) with a minimum efficiency 145 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI : 70. The housing should be of non-corrosive high-pressure die-cast aluminium to with stand extreme environments. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. with PF > 0.95. Lifetime of 75K hours @L70. Product should be suitable for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP 66 with an IK rating of 08. Optical and control gear compartments shall be maintainable/replaceable without impacting the LED units. The access to the optical and the gear compartment should be separate. While accessing the gear compartment, the optical compartment should not be accessible. The Luminaire should have a 20 KV /10 KA SPD duly bolted in the Luminaire. The SPD should be able to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The Luminaire should have a breather to ensure that air balance inside and outside of the Compartment .The luminaire should be of Class B Serviceability. The wattage of each LED should be greater than 1 watt and less than 3 Watt. Only high power Single white LED chip with ceramic based suitable for outdoor use is allowed. Multi Chip, array multi die, mid power, Integrated arrays and COB’s are not permitted. The High power LED used in the luminaire shall be SMD type only of make LGIT, Lumileds, Osram, Nichia, and CREE & no other make. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. The luminaires should have a breather ensuring a stable optical and thermal management. The weight of the luminaire should not be more than 12 Kg.

Supply, Programming and Commissioning of Outdoor type external lighting CCMS Feeder Panel for Remote Management, Switching, Multistep Dimming and Monitoring of Streetlights using group control system to be supplied considering 1 feeder Pillar cabinet for 10KW LED Load, Central Dimming required from group controls. The dim level commands to the luminaires shall be generated from the LMS equipment installed in the electrical cabinet without any additional wires or pilot lines & minimum 8 dynamic steps should be there excluding ON & OFF. All the luminaires in the segment shall have the same dim level as per the command from the LMS or local trigger. Dimming commands from the mains power cabinet shall not be interrupted by any intermediary luminaire failures between poles. Luminaires shall fall back to 100% light output if there any interruption in dimming commands. Lighting cabinets/feeder pillar to be connected independently to lighting management system cloud server through GPRS/Ethernet with open internet must have following features: a) Automatic (with a timer), remote (with GPRS/GSM) and manual switching option b) Remote energy measurement c) Near real time monitoring d) Alarms and report generation e) Emergency override locally and remotely f) Web based user interface with integrated visual maps g) Data security and secured system access h) Prevent unauthorised physical access to the street light control box i) secured 128 Bit encrypted communication between server and street light feeder panel.

Erection, Testing & Commissioning of the 16m Sports Highmast Pole with Ladder Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common templateHigh mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 2.5 sq. mm, lugs and all labour.

SITC of Total 48 KW HYBRID SOLAR SYSTEM(or as per Requirement of Backup Time) WITH 5 HOURS BACK Up with Inverter (48KW HYBRIDE INVERTER (WARRANTY 5 YEARS),.LITHIUM BATTRY 200 AH Capacity 5 YEARS WARRANTY. CYCLE 3000 TIMES),Structure(STRUCHER 5 FEET./3 FEET GI STUCHER),Nut Bolts etc ( ALL WIRING. DC DVR. AC DVR.COMPLETE WIRING WITH ALL APPLIANCE included)

SITC of mounting Channel in which LED flood light can mount for illumination of court.Mounting Stracture should have Proper provision of light holding.

Supply and fixing of TLL 50WATT all in one street light along with MONo Crystalline 50 Wp solar panel and 308 wh Lithium battery aluminium housing , LED rating -50000Hr@LM70, Efficacy Lumen /watt> 130,CRI->70, charge controller. Type MPPT, SENSOR Type -PIR Dusk to down Operation,TLL-jupitor-AIO50

CCTV Network Camera Bullet 4 MP (Brand - Hikvision / Bosch / Honeywell) Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - 4/MJPEG/H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T

CCTV Network Camera Dome 4 MP Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - H.264/MJPEG/H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T

Supply / Installation and Commissioning of 24 Port Network Switch GIGA PoE,IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant,24x10/100/1000 Mbps Auto-MDIX PoE ports,Provides up to 30 watts per PoE port,PoE power budget 370W,4 KV surge protection for PoE ports,IEEE 802.3x flow control support,Plug-and-play installation,8.8 Gbps switching fabric,2.75 Mbits RAM Data Buffer,4K MAC address entries,Sturdy metal enclosure

Hard disk 6 TB

12U Network Rack

Display : Screen size – 42 inch or above (LG/Sony/ Samsung/ Philips), Panel Technology IPS, Surveillance Monitor

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Sq.Meter

Meter

Meter

32 bit microprocessor based Intelligent Addressable Fire Alarm Control panel with 4 loops with battery back up. The panel would be modular, decentralized, with The panel shall be consisting with minimum 240 character LCD display and for networking. The Panel would be able to record atleast 60,000 events history. Each loop would be capable to have atleast 250 addressable detectors and addressable devices with up to 3.5km loop length. Make: Schrack Seconet (Vds approved)

1 KVA LINE INTERACTIVE UPS WITH 30 MIN BATTERY BACK UP

Supplying and fixing Intelligent Addressable type multicriteria detector with base for use as heat or smoke or combined both with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd.

Supplying and fixing Intelligent Addressable type Heat detector with base with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd.

Sypplying and fixing Intelligent Addressable Manual Call Point having inbuilt short circuit isolator i/c testing and commissiong etc as reqd.

Addressable sounder with interface module, power supply for suonder and programmable by software having integrated short circuit isolator & having operating temperature -10⁰C to + 55⁰C

Analogue Addressable Control module with IP66 casing containing four relay outputs, each containing a potential-free DPDT contact with a fail-safe and in-built short circuit isolator The ambient temperature range shall be -20C to +60C.

Duel LED Response Indicator (LOCAL)

Supplying and laying of 2x1.5 sq.mm. ISI marked copper armourd conductor cable with gland scoket and other wiring accessories on the existing surface/tray/shaft etc as reqd

Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring,earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :

Meter

Providing and fixing following size Pressure gauge (0-15 Kg/Cm2) complete with shut off valve duly calibrated before installation complete as required & as per enclosed specification. 150mm dia.

Description of Work

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around

A=n*2*(L+B)*H

Providing & Laying 2.0 mm thick Vinyl Flooring ( Armstrong / Wonderfloor, etc )

DGM BSBCCL Bhagalpur

DESCRIPTION

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc.as required

Point

Metre

Metre

Metre

Metre

Metre

Metre

Supplying and fixing PVC/G.I box of 200mm x 250mm x 60mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required (Adopter box above each D.B).

Supplying and fixing PVC/G.I box of 75 mm X 75 mm X 50 mm deepdeep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required (Adopter box above each D.B).

Supplying and fixing 12 modules GI box along with moduler base & cover plate surface or in recess including providing and fixing of 4 nos 6 pin 15/16 amps socket outlet with 4 no 15/16A moduler type switch ,connection etc. as required.

Supply & fixing 4 way(4+12) double door TP & N, sheet steel, MCB distribution board, 415 volts, on surface/ in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required (But without MCB / RCCB / Isolator) light DB

Supply & fixing 4 way(4+12) double door TP & N, sheet steel, MCB distribution board, 415 volts, on surface/ in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required (But without MCB / RCCB / Isolator) Power DB

S/F modular blanking plate on the existing modular plate and switch box excluding modular plate as required.

Main Bus Bar: 4 strip 300 amp bus bar made of electrical grade copper strip enclosed in separate bus bar chamber, provided with DMC/ SMC bus bar support duly insulated with heat shrinkable sleeves in distinct colours as reqd: 1 set (1 Amp per sqmm.)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as per required.

Supplying and fixing Cable end box (Loose wire box, IP43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240/415 V, on surface /recess complete with testing and commissioning etc. as required.

Providing and fixing MV danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

per set

Metre

Metre

Supply & Laying of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, & cable & wirE shall be armoured, served, sheathed 1100 volts grade as per Batra Henley / Havells/ Finolex.

Metre

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supply and fixing 100 mm dia medium class GI pipe etc as required.

Supply and Installation of regular/standard module AC ceiling fan of 1400 mm sweep including wiring the down rod of standard length 9 upto 30 cm ) with 1.5 sq mm FR pvc insulated copper conductor etc as required.

Supply and Installation of 300 mm 230volt AC exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required.

Supply and installation of 600 mm, 230 V A.C. wall mounted Air circulator, heavy duty fan including fixing the bracket, making onnection, testing, commissioning etc as required.

Supplying and fixing indoor recess mounting 36 watt LED flat panel luminaire suitable for armstrong/grid ceiling and complete with electronic driver etc. directly on false ceiling including connection with 1.5 sqmm fR PVC insulated copper conductor cable and earthing the body etc as required.

Supplying and fixing 90 watt LED type FLOOD light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc and connection with FR PVC insulated copper conductor cable and earthing the body etc. as required

Meter

Meter

Supply and fixing of fire extinguisher, ABC Type 4.00kg. Capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply and fixing of shock treatment chart (prescribed under I. E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material, labour, T&P for proper completion of work.

Supply and fixing of fire bucket, round bottom made of GI sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per direction of Engineer-in-Charge.

Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, ISI marked as per IS:2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.

SITC AC split(1.5 ton) with stabilizer ISI standard as per specification 5 star inverter AC.. ( Make- blue star/mitsubishi/lg/carrier/Hitachi)

Extra copper piping electrical wire for split AC

Extra drain pipe split AC

Supplying and drawing of UTP 4 pair CAT-6 LAN cable in the existing surface/recessed steel /PVC concuitas required.

Category 6 UTP Patch Cords - 1 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact

Category 6 UTP Patch Cords - 2 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact

24-port GbE Smart Managed Switch with GbE Uplink Interfaces-24 Ports 10/100/1000Mbps+4 SFP;Port Standards & Functions-IEEE 802.3 10BASE-T Ethernet (twisted-pair copper),IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper),IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper),IEEE 802.3az compliance Auto-negotiation,IEEE 802.3x Flow Control; Full/Half Duplex-Full/half duplex for 10/100 Mbps speeds,Full duplex for Gigabit speed;Media Interface Exchange Auto MDI/MDIX adjustment for all twisted-pair ports;Switching Capacity 56 Gbps; Transmission Method Store-and-forward; MAC Address Table 16,000 entries per device, Maximum 64 bytes packet forwarding rate 41.7 Mpps,Packet Buffer Memory 1.5 MB,Maximum Power Consumption 22.45 watts, Standby Power Consumption 17.84 W/240 V, Acoustics 0 dBA Heat Dissipation 76.55 Btu/hr, Operating Temperature -5 to 50 ˚C (23 to 122 °F), Storage Temperature -20 to 70 ˚C (-4 to 158 °F), Operating Humidity 0% to 95% non-condensing, Storage Humidity 0% to 95% non-condensing, Diagnostic LEDs Link/Activity/Speed (Per 10/100/1000 Mbps port), Certifications CE (LVD) BSMICCC, C-Tick. Netgear / D-link/ Cisco.

Category 6, UTP 24-Port Patch Panel Size - 482.6mm x 44.2 (19’’ x 1U), Panel Material - Steel-fully powder coated, Unshielded - RJ 45, Plug Insertion Cycle - 750 times DC Resistance- 72Ω max, Voltage Rating - 72 Vdc max, Current Rating - 1.5A max

Supply fitting fixing Rack 19" 12U fully powder coated complete etc as required with complete accessories (5 amp x 6 socket, wire manager, rack fan) VALRACK/ Netrack make.

Supplying and fixing of RJ 45 computer socket suitable for Cat 6 on module GI box along with base & cover plate in surface or in recess including making connection, soldering etc. as required.

Smart-UPS On-Line, 30 kW /30 kVA with 30 minutes Backup 12 V 42 AH SMF Battery UPS Toplogy Double Conversion On-Line, Power Rating (VA / Watts) 30000Watts/30000VA, Form Factor Rack/Tower Convertible; Output Power Capacity 30000 Watts/30000 VA, Max Configurable Power 30000Watts/30000VA, Nominal Output Voltage 230V, Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage, Efficiency at Full Load 94.00%, Output Voltage Distortion Less than 3%,Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz,Crest Factor 03:01,Waveform Type Sine Wave, Output Connections (1)*Hard Wire 3-wire (8)*(H N + G) IEC 320 C13(8),Bypass Built-in Bypass, Output Short Circuit Protection Yes,Parallel Redundancy (Option) 1 + 1, Nominal Input Voltage 230V,Input Power Factor>0.98,Input Frequency 40-70Hz,Input Connections Terminal Block, Protection Thermal Circuit Breaker (250VAC/20A), Input voltage range for main operations full load 160 - 285V, Input voltage range for mains operation half load 160-285V, High Voltage withstand Capability 420 VAC, Green Mode Range 210-250 VAC (230 V), Battery Type Mintenance - free sealed Lead-Acid battery with suspended, electrolyte. 12V 42 Ah SMF battery for 30 Min Battery Back up.

SITC of 2MP IR Indoor Dome Fixed Camera- 1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, Color: 0.01 Lux at F1.2, ICR, ONVIF, support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Tripple individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, IK10, Edge Anlalytics- Line crossing detection, intrusion detection, Motion detection, video tampering, UL, CE, FCC certified. (DS-2CD3121G0-I (2.8 mm) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC of 2MP IR Bullet Fixed Camera -1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S), support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering, UL, CE, FCC certified. (DS-2CD3021G0-I (2.8 mm) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC of 64 ch Network Video Recorder - Connect Up to 64 IP Cameras, Dual OS, Up to 12 Megapixels Resolution, Two independent HDMI outputs, one HDMI output of 4K resolution,1 VGA output with output upto 1920 × 1080, Support H.265, MJPEG, Supports N+1 hot spare system,Supports RAID0, RAID1, RAID5, RAID6 and RAID10 ,Supports HDD hot swap, Supports Dual Power-Redundant, Incoming Bandwidth 320 Mbps, 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 6TB, 3 × USB at least 1 × USB with 3.0, Alarm I/O 16/4, RS-485, RS-232, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified. (DS-7764NI-I8) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC OF 32" LCD 24X7 Surveillance Monitor

SITC of 16 port Unmanaged Network PoE Switch: 24 port PoE Switch with PoE standard of IEEE 802.3af , IEEE 802.3at, PoE port, Uplink ports (DS-3E0326P-E) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC OF Cat-6 Cable: UTP CAT 6, 305 meters,Core diameter: 0.53mm,OFC,CM,white (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC of 6TB Surveillance Hard Disk (ST6000VX0023) (Approved Makes: Hikvision/ Honeywell/ Bosch)

19" 6U Rack for Switches complete as required

Camera installation and Connectivity.

In-ceiling speaker 6" ceiling loudspeaker. 6/3W @ 100V, 100-15,000Hz, 93dB 1W 1M. Dimensions (L x H): 188mm x 76mm, mounting hole 170mm diameter. White( Surface mount speakers to be provided if no provision for ceiling speakers) Make: Cloud UK, Alfatron, Biamp.

Media player, mixer amplifier with Bluetooth. Supplied with remote control. On board tuner and MP3 player. Inputs: Front panel mic. input with priority function, rear panel balanced mic. input with phantom power. Emergency input function. Dual RCA line inputs. Outputs: RCA aux out. 60W at 70/100V and 4-16 Ohms. 24V backup power input.Make:Biamp, Alfatron.

LCD portable projector, 5,000 lumens, WUXGA, 16,000:1 contrast ratio, Aspect Ratio:16:10, Lens (Throw Ratio)1.6x manual zoom (throw ratio: 1.09–1.77:1), manual focus F 1.60–2.12, f 15.30–24.64 mm, Make: Panasonic, Christe, Barco.

113" Diagonal, 16:10 Aspect Ratio, black border on all sides, matt white fabric, motorised with remote and heavy duty Motor. Make AV-craft, grandview.

Projector ceiling mount 1x2, adjustment option. Make TS, B-Tech, Eqv.

Cable Manager with Power socket and HDMI. Make Logic/ Legrand.

C–HM/HM/ETH–50 ( 50 feet) make Kramer / Extron.

Equipment Rack, with Hardware and lock. Make Valrack/ Custom / Eqv.

SITC of 50 LPH RO Water Purifier alng with RO-AUTO MAX 50 lph, hdrophenumatic tank-10 LPH, Faucet-1 nozzle, accessories- clip, inlet & outlet pipe etc.

Description of Work

Closed timbering over Area

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor.

Providing and laying in position cement concrete of specified grade.

All work above Plinth level upto floor V Level : Concrete of M-25 grade with minimum cement content of 330 kg/cum

TMTC-500- 08 mm dia.

TMTC-500- 10 mm dia.

TMTC-500- 12 mm dia.

TMTC-500- 16 mm dia.

TMTC-500- 20 mm dia.

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roots, landings, balcnies and access platform..

Lintels, beams, plinth bams, griders, bressumers and contilevers.

Columns,Pillars, Piers, Abutments, Posts and Struts

Weather shade,Chajjas, corbels etc. including edges

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in

Brick work with bricks of class designation 100A in foundations and plinth in :

Half brick masonry with bricks of class designation 100A

12 mm cement plaster on rough side of single or half brick wall of mix : (1 : 6)

15 mm cement plaster on rough side of single or half brick wall of mix : (1 : 6)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),...

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Detailing,Engineering,Manufacturing,Painting,Supply,transportation & Erection of steel structure system for PEB structure with Z purlin , sagrods runners , cross bracing clip fastners using 350 MFa grade Hitensible steel. All fabrication work shall be done off-shore (not on site) bolt in connection type and only site assembly shall be done with the help of high strength bolts (HSFG) . All testing and inspection facility shall be in-house to ensure 100% checking and inspection prior to shipment from the fabrication shop. All structure steel shall be min 350 Mpa yield strength of E350 grade or equivalent grade but not less than 350 Mpa as per approval of Engineer in-charge. All anchor bolts shall be high strength HSFG bolts for assembly and electro-galvanized of min. 8.8 grade. Entire steel structure shall be surface finished shot blasted as per SA 2 1/2 followed by applying 2 coat of epoxy base primer each coat of min. 35 micron and 2 coat of final finish epoxy paint shall be applied each of min. 35 micron thickness on entire structure prior to shipment. Final painting can be done at site during installation.All design & drawings shall be per-approved by Engineer in-charge

Supply & fixing of Hi-Rib profiled sheeting 1000-1030 cover width, 28/30 mm crests @ 250-255 mm c/c manufactured out of 0.55 mm TCT hi-tensile Multi Cloured Galvalume steel (AZ-150 gsm. Aluminium-Zinc alloy metallic coating of total both sides 550 Mpa yield stress as per AS-1397). The sheet shall have wide pans with 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on side laps for purlin support. The male end of the sheet shall have anti-capillary flute at side lap to prevent leakages. The sheet shall be passivated and clear resin coated. The sheet shall be fixed by means of galvanised self-drilling self tapping fasteners ( 12-14x55 with EPDM seals). The sheet shall be supplied in lengths maximum upto 6-12 Mtrs long to suit site dimensions

Supply and fixing of Multi Coloured galvalume sheet with screws on cladding.

Supply and fixing of Flashing /Ridge/ and gable flashing colour coated up to : Supply and fixing of Flashing /Ridge/ and gable flashing colour coated up to : 300mm - 500 mm girth.

Providing & Fixing GE plastic 600mm dia Turbo Vents of approved make and laying in position as per drawing or as directed by Engineer-in-charge

Providing & Fixing clear polycarbonate sheet 1000 mm wide & 1.5 mm thick of approved make and laying in position as per drawings matching profile with galvalium sheet or as directed by Engineer-in-charge

Supply and fixing of Colour coated gutters with gutter supports, sealnts

Providing & Fixging MS rain water pipe 100 x 125 mm of approved make in position as per drawings or as directed by Engineer-in-Charge.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T"...

Providing & Laying 2.0 mm thick Vinyl Flooring ( Armstrong / Wonderfloor, etc )

Providing and fixing soil, waste and vent pipes : Sand cast iron S&S pipe as per IS: 1729

Carriage of materials

Extra Cost of Materials

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS :7231, with all fittings and floors wherever required :

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

Meter

Meter

metre

metre

metre

quintal

Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931

Providing and fixing gun metal non- return valve of approved quality (screwed end)

metre

metre

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc.as required

Point

Metre

Metre

Metre

Metre

Metre

Metre

Supplying and fixing PVC/G.I box of 200mm x 250mm x 60mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required (Adopter box above each D.B).

Supplying and fixing PVC/G.I box of 75 mm X 75 mm X 50 mm deepdeep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required (Adopter box above each D.B).

Supplying and fixing 12 modules GI box along with moduler base & cover plate surface or in recess including providing and fixing of 4 nos 6 pin 15/16 amps socket outlet with 4 no 15/16A moduler type switch ,connection etc. as required.

Supply & fixing 4 way(4+12) double door TP & N, sheet steel, MCB distribution board, 415 volts, on surface/ in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required (But without MCB / RCCB / Isolator) light DB

Supply & fixing 4 way(4+12) double door TP & N, sheet steel, MCB distribution board, 415 volts, on surface/ in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required (But without MCB / RCCB / Isolator) Power DB

S/F modular blanking plate on the existing modular plate and switch box excluding modular plate as required.

Main Bus Bar: 4 strip 300 amp bus bar made of electrical grade copper strip enclosed in separate bus bar chamber, provided with DMC/ SMC bus bar support duly insulated with heat shrinkable sleeves in distinct colours as reqd: 1 set (1 Amp per sqmm.)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as per required.

Supplying and fixing Cable end box (Loose wire box, IP43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240/415 V, on surface /recess complete with testing and commissioning etc. as required.

Providing and fixing MV danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

per set

Metre

Metre

Supply & Laying of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, & cable & wirE shall be armoured, served, sheathed 1100 volts grade as per Batra Henley / Havells/ Finolex.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supply and fixing 100 mm dia medium class GI pipe etc as required.

Supply and Installation of regular/standard module AC ceiling fan of 1400 mm sweep including wiring the down rod of standard length 9 upto 30 cm ) with 1.5 sq mm FR pvc insulated copper conductor etc as required.

Supply and Installation of 300 mm 230volt AC exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required.

Supply and installation of 600 mm, 230 V A.C. wall mounted Air circulator, heavy duty fan including fixing the bracket, making onnection, testing, commissioning etc as required.

Supplying and fixing indoor recess mounting 36 watt LED flat panel luminaire suitable for armstrong/grid ceiling and complete with electronic driver etc. directly on false ceiling including connection with 1.5 sqmm fR PVC insulated copper conductor cable and earthing the body etc as required.

Supplying and fixing 90 watt LED type FLOOD light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc and connection with FR PVC insulated copper conductor cable and earthing the body etc. as required

Meter

Meter

Supply and fixing of fire extinguisher, ABC Type 4.00kg. Capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply and fixing of shock treatment chart (prescribed under I. E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material, labour, T&P for proper completion of work.

Supply and fixing of fire bucket, round bottom made of GI sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per direction of Engineer-in-Charge.

Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, ISI marked as per IS:2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.

SITC AC split(1.5 ton) with stabilizer ISI standard as per specification 5 star inverter AC.. ( Make- blue star/mitsubishi/lg/carrier/Hitachi)

Extra copper piping electrical wire for split AC

Extra drain pipe split AC

Supplying and drawing of UTP 4 pair CAT-6 LAN cable in the existing surface/recessed steel /PVC concuitas required.

Category 6 UTP Patch Cords - 1 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact

Category 6 UTP Patch Cords - 2 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact

24-port GbE Smart Managed Switch with GbE Uplink Interfaces-24 Ports 10/100/1000Mbps+4 SFP;Port Standards & Functions-IEEE 802.3 10BASE-T Ethernet (twisted-pair copper),IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper),IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper),IEEE 802.3az compliance Auto-negotiation,IEEE 802.3x Flow Control; Full/Half Duplex-Full/half duplex for 10/100 Mbps speeds,Full duplex for Gigabit speed;Media Interface Exchange Auto MDI/MDIX adjustment for all twisted-pair ports;Switching Capacity 56 Gbps; Transmission Method Store-and-forward; MAC Address Table 16,000 entries per device, Maximum 64 bytes packet forwarding rate 41.7 Mpps,Packet Buffer Memory 1.5 MB,Maximum Power Consumption 22.45 watts, Standby Power Consumption 17.84 W/240 V, Acoustics 0 dBA Heat Dissipation 76.55 Btu/hr, Operating Temperature -5 to 50 ˚C (23 to 122 °F), Storage Temperature -20 to 70 ˚C (-4 to 158 °F), Operating Humidity 0% to 95% non-condensing, Storage Humidity 0% to 95% non-condensing, Diagnostic LEDs Link/Activity/Speed (Per 10/100/1000 Mbps port), Certifications CE (LVD) BSMICCC, C-Tick. Netgear / D-link/ Cisco.

Category 6, UTP 24-Port Patch Panel Size - 482.6mm x 44.2 (19’’ x 1U), Panel Material - Steel-fully powder coated, Unshielded - RJ 45, Plug Insertion Cycle - 750 times DC Resistance- 72Ω max, Voltage Rating - 72 Vdc max, Current Rating - 1.5A max

Supply fitting fixing Rack 19" 12U fully powder coated complete etc as required with complete accessories (5 amp x 6 socket, wire manager, rack fan) VALRACK/ Netrack make.

Supplying and fixing of RJ 45 computer socket suitable for Cat 6 on module GI box along with base & cover plate in surface or in recess including making connection, soldering etc. as required.

Smart-UPS On-Line, 30 kW /30 kVA with 30 minutes Backup 12 V 42 AH SMF Battery UPS Toplogy Double Conversion On-Line, Power Rating (VA / Watts) 30000Watts/30000VA, Form Factor Rack/Tower Convertible; Output Power Capacity 30000 Watts/30000 VA, Max Configurable Power 30000Watts/30000VA, Nominal Output Voltage 230V, Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage, Efficiency at Full Load 94.00%, Output Voltage Distortion Less than 3%,Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz,Crest Factor 03:01,Waveform Type Sine Wave, Output Connections (1)*Hard Wire 3-wire (8)*(H N + G) IEC 320 C13(8),Bypass Built-in Bypass, Output Short Circuit Protection Yes,Parallel Redundancy (Option) 1 + 1, Nominal Input Voltage 230V,Input Power Factor>0.98,Input Frequency 40-70Hz,Input Connections Terminal Block, Protection Thermal Circuit Breaker (250VAC/20A), Input voltage range for main operations full load 160 - 285V, Input voltage range for mains operation half load 160-285V, High Voltage withstand Capability 420 VAC, Green Mode Range 210-250 VAC (230 V), Battery Type Mintenance - free sealed Lead-Acid battery with suspended, electrolyte. 12V 42 Ah SMF battery for 30 Min Battery Back up.

SITC of 2MP IR Indoor Dome Fixed Camera- 1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, Color: 0.01 Lux at F1.2, ICR, ONVIF, support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Tripple individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, IK10, Edge Anlalytics- Line crossing detection, intrusion detection, Motion detection, video tampering, UL, CE, FCC certified. (DS-2CD3121G0-I (2.8 mm) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC of 2MP IR Bullet Fixed Camera -1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S), support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering, UL, CE, FCC certified. (DS-2CD3021G0-I (2.8 mm) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC of 64 ch Network Video Recorder - Connect Up to 64 IP Cameras, Dual OS, Up to 12 Megapixels Resolution, Two independent HDMI outputs, one HDMI output of 4K resolution,1 VGA output with output upto 1920 × 1080, Support H.265, MJPEG, Supports N+1 hot spare system,Supports RAID0, RAID1, RAID5, RAID6 and RAID10 ,Supports HDD hot swap, Supports Dual Power-Redundant, Incoming Bandwidth 320 Mbps, 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 6TB, 3 × USB at least 1 × USB with 3.0, Alarm I/O 16/4, RS-485, RS-232, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified. (DS-7764NI-I8) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC OF 32" LCD 24X7 Surveillance Monitor

SITC of 16 port Unmanaged Network PoE Switch: 24 port PoE Switch with PoE standard of IEEE 802.3af , IEEE 802.3at, PoE port, Uplink ports (DS-3E0326P-E) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC OF Cat-6 Cable: UTP CAT 6, 305 meters,Core diameter: 0.53mm,OFC,CM,white (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC of 6TB Surveillance Hard Disk (ST6000VX0023) (Approved Makes: Hikvision/ Honeywell/ Bosch)

19" 6U Rack for Switches complete as required

Camera installation and Connectivity.

In-ceiling speaker 6" ceiling loudspeaker. 6/3W @ 100V, 100-15,000Hz, 93dB 1W 1M. Dimensions (L x H): 188mm x 76mm, mounting hole 170mm diameter. White( Surface mount speakers to be provided if no provision for ceiling speakers) Make: Cloud UK, Alfatron, Biamp.

Media player, mixer amplifier with Bluetooth. Supplied with remote control. On board tuner and MP3 player. Inputs: Front panel mic. input with priority function, rear panel balanced mic. input with phantom power. Emergency input function. Dual RCA line inputs. Outputs: RCA aux out. 60W at 70/100V and 4-16 Ohms. 24V backup power input.Make:Biamp, Alfatron.

LCD portable projector, 5,000 lumens, WUXGA, 16,000:1 contrast ratio, Aspect Ratio:16:10, Lens (Throw Ratio)1.6x manual zoom (throw ratio: 1.09–1.77:1), manual focus F 1.60–2.12, f 15.30–24.64 mm, Make: Panasonic, Christe, Barco.

113" Diagonal, 16:10 Aspect Ratio, black border on all sides, matt white fabric, motorised with remote and heavy duty Motor. Make AV-craft, grandview.

Projector ceiling mount 1x2, adjustment option. Make TS, B-Tech, Eqv.

Cable Manager with Power socket and HDMI. Make Logic/ Legrand.

C–HM/HM/ETH–50 ( 50 feet) make Kramer / Extron.

Equipment Rack, with Hardware and lock. Make Valrack/ Custom / Eqv.

SITC of 50 LPH RO Water Purifier alng with RO-AUTO MAX 50 lph, hdrophenumatic tank-10 LPH, Faucet-1 nozzle, accessories- clip, inlet & outlet pipe etc.

Rs (in lakh)

Rs (in lakh)

Description of Work

GRASS PLANNING: PROPER GRASS PLANNING (BERMUDA GRASS ) FORPITCH .WE PROVIDE THREE MONTH MAINTENANCE FOR GRASS DEVELOPMENT LIKE : PROPER CUTTING,WATERING,SPREADING OF FERTILIZERS ETC

Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead

1:1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

1:2:4 (1 Cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

All work upto plinth level : Concrete of M-25 grade with minimum cement content of 330 kg/cum

All work above Plinth level upto floor V Level : Concrete of M-25 grade with minimum cement content of 330 kg/cum

TMTC-500- 08 mm dia.

TMTC-500- 10 mm dia.

TMTC-500- 12 mm dia.

TMTC-500- 16 mm dia.

TMTC-500- 20 mm dia.

TMTC-500- 25 mm dia.

Foundations, footings, bases of columns etc. for mass concrete.

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Suspended floors, roots, landings, balcnies and access platform..

Lintels, beams, plinth bams, griders, bressumers and contilevers.

Columns,Pillars, Piers, Abutments, Posts and Struts

Edges of slabs and breaks in floors and walls :

Weather shade,Chajjas, corbels etc. including edges

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete

1:3 (1 cement:3 coarse sand)

1:6(1 cement: 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix : (1 : 4)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats)

Fixed to steel windows by welding

Fixed to openings/ wooden frames with rawl plugs screws etc

Supply and fixing of Flashing /Ridge/ and gable flashing colour coated up to : Supply and fixing of Flashing /Ridge/ and gable flashing colour coated up to : 300mm - 500 mm girth.

Providing & Fixing GE plastic 600mm dia Turbo Vents of approved make and laying in position as per drawing or as directed by Engineer-in-charge

Providing & Fixing clear polycarbonate sheet 1000 mm wide & 1.5 mm thick of approved make and laying in position as per drawings matching profile with galvalium sheet or as directed by Engineer-in-charge

Supply and fixing of Colour coated gutters with gutter supports, sealnts

Supply and Fixing of down Color coated 0.5mm thk. Sheet take pipe, Pipe flashing band, M.S strip U-clamp with complete accessories in color coated sheet.

Providing and fixing soil, waste and vent pipes : Sand cast iron S&S pipe as per IS: 1729

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5

Geo Textile to prevent ingress of soil

Providing and laying World Athletics Approved Prviding and laying World Athletics Approved Synthetic Athletics Track FULL PUR FULL EPDM SYSTEM of 15mm thickness with combination of SBR granules, PU and EPDM laid using paver machine which should Include "WA" Standard marking on the surface all complete as per requirements/ specification laid dawn by "WA" Class-1 certification and as per direction of the Engineer - in - charge. The bidder in its name should have experience of successfully completing at least 2 WA/IAAF certified Synthetic Athletics Track with sub base in last 5 years in India..

Mixing earth and sjudge or manure in porportion specified or directed.

Spreadingof sludge,dumpmanureor/andgoodearth inrequired thickness (Cost of sludge,dumpmanureor/andgoodearth tobe paid separately).

Supply and installation of fully computerized, automatic and single key operation pop-up sprinkler system " for surfaces including all fittings and accessories, 110 mm dia HDPE Pipe, 50 HP motor (KIRLOSKER) automatic panel, hydrant etc., fulfilling irrigation norms

Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931

Providing and fixing gun metal non- return valve of approved quality (screwed end)

Providing, laying and jointing glazed stoneware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1(1 cement: 1 fine sand) including testing of joints etc. complete.

Providing and fixing square-mouth S.W gully trap grade 'A' complete with C.I grating brick masonry chamber with water tight C.I cover with frame of 300x300mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:

Providing and laying non-pressure NP2 class (light duty) R.CC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2( 1 cement: 2 fine sand) including testing of joints etc. complete.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

S/F/F 1 H.P. Cromption or any other apprioved make Motor and ISI make automatic starter mounted on a common wooden board etc. all complete job.

S/F/F 2 H.P. Cromption or any other apprioved make Motor and ISI make automatic starter mounted on a common wooden board etc. all complete job.

Supplying and fixing PVC/G.I box of 200mm x 250mm x 60mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required.

Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required.

Supply and Installation of 300 mm 230volt AC exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required.

Supplying and fixing recess/surface mounted 23/24 (1ft X 1ft) watt LED downlighter complete with integrated electronic driver & LED directly on ceiling/false ceiling including connection with 1.5 sq.mm FR PVC insulated copper conductor cable and earthing the body etc. as required.

300 sq. mm, 3.5 core

95 sq. mm, 3.5 core

SITC of high-quality integrated LED Flood Light with a minimum system lumen of 70K Lm and system wattage not exceeding 500W(+5%) with a minimum efficiency 140 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI : 70. The housing should be of non-corrosive high-pressure die-cast aluminum to with stand extreme environments. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. with PF > 0.95. Lifetime of 75K hours @L70. Product should be suitable for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP 66 with an IK rating of 08. Optical and control gear compartments shall be maintainable/replaceable without impacting the LED units. The access to the optical and the gear compartment should be separate. While accessing the gear compartment, the optical compartment should not be accessible. The Luminaire should have a 20 KV /10 KA SPD duly bolted in the Luminaire. The SPD should be able to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The Luminaire should have a breather to ensure that air balance inside and outside of the Compartment .The luminaire should be of Class B Serviceability. The wattage of each LED should be greater than 1 watt and less than 3 Watt. Only high power Single white LED chip with ceramic based suitable for outdoor use is allowed. Multi Chip, array multi die, mid power, Integrated arrays and COB’s are not permitted. The High power LED used in the luminaire shall be SMD type only of make LGIT, Lumileds, Osram, Nichia, and CREE & no other make. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. The luminaires should have a breather ensuring a stable optical and thermal management. The weight of the luminaire should not be more than 12 Kg.

SITC of high-quality integrated LED Flood Light with a minimum system lumen of 74K Lm and system wattage not exceeding 500W(+5%) with a minimum efficiency 145 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI : 70. The housing should be of non-corrosive high-pressure die-cast aluminium to with stand extreme environments. It should have corrosion resistant powder coating to pass NSS of 500 Hrs. with PF > 0.95. Lifetime of 75K hours @L70. Product should be suitable for continuous operation (10-12 Hrs. per day). The Ingress protection should be minimum IP 66 with an IK rating of 08. Optical and control gear compartments shall be maintainable/replaceable without impacting the LED units. The access to the optical and the gear compartment should be separate. While accessing the gear compartment, the optical compartment should not be accessible. The Luminaire should have a 20 KV /10 KA SPD duly bolted in the Luminaire. The SPD should be able to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The Luminaire should have a breather to ensure that air balance inside and outside of the Compartment .The luminaire should be of Class B Serviceability. The wattage of each LED should be greater than 1 watt and less than 3 Watt. Only high power Single white LED chip with ceramic based suitable for outdoor use is allowed. Multi Chip, array multi die, mid power, Integrated arrays and COB’s are not permitted. The High power LED used in the luminaire shall be SMD type only of make LGIT, Lumileds, Osram, Nichia, and CREE & no other make. The luminaire should be capable of withstanding voltage stress of 440V for 8 Hrs., should have an auto shutdown @ 325V and have an auto recovery feature. The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. The luminaires should have a breather ensuring a stable optical and thermal management. The weight of the luminaire should not be more than 12 Kg.

Supply, Programming and Commissioning of Outdoor type external lighting CCMS Feeder Panel for Remote Management, Switching, Multistep Dimming and Monitoring of Streetlights using group control system to be supplied considering 1 feeder Pillar cabinet for 10KW LED Load, Central Dimming required from group controls. The dim level commands to the luminaires shall be generated from the LMS equipment installed in the electrical cabinet without any additional wires or pilot lines & minimum 8 dynamic steps should be there excluding ON & OFF. All the luminaires in the segment shall have the same dim level as per the command from the LMS or local trigger. Dimming commands from the mains power cabinet shall not be interrupted by any intermediary luminaire failures between poles. Luminaires shall fall back to 100% light output if there any interruption in dimming commands. Lighting cabinets/feeder pillar to be connected independently to lighting management system cloud server through GPRS/Ethernet with open internet must have following features: a) Automatic (with a timer), remote (with GPRS/GSM) and manual switching option b) Remote energy measurement c) Near real time monitoring d) Alarms and report generation e) Emergency override locally and remotely f) Web based user interface with integrated visual maps g) Data security and secured system access h) Prevent unauthorised physical access to the street light control box i) secured 128 Bit encrypted communication between server and street light feeder panel.

Erection, Testing & Commissioning of the 16m Sports Highmast Pole with Ladder Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common templateHigh mast with the help of suitable tools and plants, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 2.5 sq. mm, lugs and all labour.

SITC of Total 48 KW HYBRID SOLAR SYSTEM(or as per Requirement of Backup Time) WITH 5 HOURS BACK Up with Inverter (48KW HYBRIDE INVERTER (WARRANTY 5 YEARS),.LITHIUM BATTRY 200 AH Capacity 5 YEARS WARRANTY. CYCLE 3000 TIMES),Structure(STRUCHER 5 FEET./3 FEET GI STUCHER),Nut Bolts etc ( ALL WIRING. DC DVR. AC DVR.COMPLETE WIRING WITH ALL APPLIANCE included)

SITC of mounting Channel in which LED flood light can mount for illumination of court.Mounting Stracture should have Proper provision of light holding.

Supply and fixing of TLL 50WATT all in one street light along with MONo Crystalline 50 Wp solar panel and 308 wh Lithium battery aluminium housing , LED rating -50000Hr@LM70, Efficacy Lumen /watt> 130,CRI->70, charge controller. Type MPPT, SENSOR Type -PIR Dusk to down Operation,TLL-jupitor-AIO50

CCTV Network Camera Bullet 4 MP (Brand - Hikvision / Bosch / Honeywell) Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - 4/MJPEG/H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T

CCTV Network Camera Dome 4 MP Image Sensor - 1/3" Progressive Scan CMOS, Shutter Speed - 1/3s to 1/10,000 s, Lens - 2.7mm, 4mm, 6mm @ F2.0angle of view: 106°(2.7mm), 83°(4mm), 55.4°(6mm), Day &Night - IR cut filter with auto switch, White Balance - Automatic/Manual, Video Compression - H.264/MJPEG/H.264+, Max. Resolution - 2688×1520, Communication Interface - 1 RJ45 10M/100M Ethernet port, Base T

Supply / Installation and Commissioning of 24 Port Network Switch GIGA PoE,IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant,24x10/100/1000 Mbps Auto-MDIX PoE ports,Provides up to 30 watts per PoE port,PoE power budget 370W,4 KV surge protection for PoE ports,IEEE 802.3x flow control support,Plug-and-play installation,8.8 Gbps switching fabric,2.75 Mbits RAM Data Buffer,4K MAC address entries,Sturdy metal enclosure

Hard disk 6 TB

12U Network Rack

Display : Screen size – 42 inch or above (LG/Sony/ Samsung/ Philips), Panel Technology IPS, Surveillance Monitor

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Meter

Sq.Meter

Meter

Meter

32 bit microprocessor based Intelligent Addressable Fire Alarm Control panel with 4 loops with battery back up. The panel would be modular, decentralized, with The panel shall be consisting with minimum 240 character LCD display and for networking. The Panel would be able to record atleast 60,000 events history. Each loop would be capable to have atleast 250 addressable detectors and addressable devices with up to 3.5km loop length. Make: Schrack Seconet (Vds approved)

1 KVA LINE INTERACTIVE UPS WITH 30 MIN BATTERY BACK UP

Supplying and fixing Intelligent Addressable type multicriteria detector with base for use as heat or smoke or combined both with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd.

Supplying and fixing Intelligent Addressable type Heat detector with base with automatic electronic addressing, microprocessor type with builtin integrated short circuit isolator including testing, commissiong etc as reqd.

Sypplying and fixing Intelligent Addressable Manual Call Point having inbuilt short circuit isolator i/c testing and commissiong etc as reqd.

Addressable sounder with interface module, power supply for suonder and programmable by software having integrated short circuit isolator & having operating temperature -10⁰C to + 55⁰C

Analogue Addressable Control module with IP66 casing containing four relay outputs, each containing a potential-free DPDT contact with a fail-safe and in-built short circuit isolator The ambient temperature range shall be -20C to +60C.

Duel LED Response Indicator (LOCAL)

Supplying and laying of 2x1.5 sq.mm. ISI marked copper armourd conductor cable with gland scoket and other wiring accessories on the existing surface/tray/shaft etc as reqd

Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring,earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required :

Meter

Providing and fixing following size Pressure gauge (0-15 Kg/Cm2) complete with shut off valve duly calibrated before installation complete as required & as per enclosed specification. 150mm dia.

Description of Work

12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around

A=n*2*(L+B)*H

Providing & Laying 2.0 mm thick Vinyl Flooring ( Armstrong / Wonderfloor, etc )

DGM BSBCCL Bhagalpur

DESCRIPTION

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc.as required

Point

Metre

Metre

Metre

Metre

Metre

Metre

Supplying and fixing PVC/G.I box of 200mm x 250mm x 60mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required (Adopter box above each D.B).

Supplying and fixing PVC/G.I box of 75 mm X 75 mm X 50 mm deepdeep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required (Adopter box above each D.B).

Supplying and fixing 12 modules GI box along with moduler base & cover plate surface or in recess including providing and fixing of 4 nos 6 pin 15/16 amps socket outlet with 4 no 15/16A moduler type switch ,connection etc. as required.

Supply & fixing 4 way(4+12) double door TP & N, sheet steel, MCB distribution board, 415 volts, on surface/ in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required (But without MCB / RCCB / Isolator) light DB

Supply & fixing 4 way(4+12) double door TP & N, sheet steel, MCB distribution board, 415 volts, on surface/ in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required (But without MCB / RCCB / Isolator) Power DB

S/F modular blanking plate on the existing modular plate and switch box excluding modular plate as required.

Main Bus Bar: 4 strip 300 amp bus bar made of electrical grade copper strip enclosed in separate bus bar chamber, provided with DMC/ SMC bus bar support duly insulated with heat shrinkable sleeves in distinct colours as reqd: 1 set (1 Amp per sqmm.)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as per required.

Supplying and fixing Cable end box (Loose wire box, IP43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240/415 V, on surface /recess complete with testing and commissioning etc. as required.

Providing and fixing MV danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

per set

Metre

Metre

Supply & Laying of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, & cable & wirE shall be armoured, served, sheathed 1100 volts grade as per Batra Henley / Havells/ Finolex.

Metre

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supply and fixing 100 mm dia medium class GI pipe etc as required.

Supply and Installation of regular/standard module AC ceiling fan of 1400 mm sweep including wiring the down rod of standard length 9 upto 30 cm ) with 1.5 sq mm FR pvc insulated copper conductor etc as required.

Supply and Installation of 300 mm 230volt AC exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required.

Supply and installation of 600 mm, 230 V A.C. wall mounted Air circulator, heavy duty fan including fixing the bracket, making onnection, testing, commissioning etc as required.

Supplying and fixing indoor recess mounting 36 watt LED flat panel luminaire suitable for armstrong/grid ceiling and complete with electronic driver etc. directly on false ceiling including connection with 1.5 sqmm fR PVC insulated copper conductor cable and earthing the body etc as required.

Supplying and fixing 90 watt LED type FLOOD light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc and connection with FR PVC insulated copper conductor cable and earthing the body etc. as required

Meter

Meter

Supply and fixing of fire extinguisher, ABC Type 4.00kg. Capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply and fixing of shock treatment chart (prescribed under I. E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material, labour, T&P for proper completion of work.

Supply and fixing of fire bucket, round bottom made of GI sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per direction of Engineer-in-Charge.

Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, ISI marked as per IS:2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.

SITC AC split(1.5 ton) with stabilizer ISI standard as per specification 5 star inverter AC.. ( Make- blue star/mitsubishi/lg/carrier/Hitachi)

Extra copper piping electrical wire for split AC

Extra drain pipe split AC

Supplying and drawing of UTP 4 pair CAT-6 LAN cable in the existing surface/recessed steel /PVC concuitas required.

Category 6 UTP Patch Cords - 1 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact

Category 6 UTP Patch Cords - 2 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact

24-port GbE Smart Managed Switch with GbE Uplink Interfaces-24 Ports 10/100/1000Mbps+4 SFP;Port Standards & Functions-IEEE 802.3 10BASE-T Ethernet (twisted-pair copper),IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper),IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper),IEEE 802.3az compliance Auto-negotiation,IEEE 802.3x Flow Control; Full/Half Duplex-Full/half duplex for 10/100 Mbps speeds,Full duplex for Gigabit speed;Media Interface Exchange Auto MDI/MDIX adjustment for all twisted-pair ports;Switching Capacity 56 Gbps; Transmission Method Store-and-forward; MAC Address Table 16,000 entries per device, Maximum 64 bytes packet forwarding rate 41.7 Mpps,Packet Buffer Memory 1.5 MB,Maximum Power Consumption 22.45 watts, Standby Power Consumption 17.84 W/240 V, Acoustics 0 dBA Heat Dissipation 76.55 Btu/hr, Operating Temperature -5 to 50 ˚C (23 to 122 °F), Storage Temperature -20 to 70 ˚C (-4 to 158 °F), Operating Humidity 0% to 95% non-condensing, Storage Humidity 0% to 95% non-condensing, Diagnostic LEDs Link/Activity/Speed (Per 10/100/1000 Mbps port), Certifications CE (LVD) BSMICCC, C-Tick. Netgear / D-link/ Cisco.

Category 6, UTP 24-Port Patch Panel Size - 482.6mm x 44.2 (19’’ x 1U), Panel Material - Steel-fully powder coated, Unshielded - RJ 45, Plug Insertion Cycle - 750 times DC Resistance- 72Ω max, Voltage Rating - 72 Vdc max, Current Rating - 1.5A max

Supply fitting fixing Rack 19" 12U fully powder coated complete etc as required with complete accessories (5 amp x 6 socket, wire manager, rack fan) VALRACK/ Netrack make.

Supplying and fixing of RJ 45 computer socket suitable for Cat 6 on module GI box along with base & cover plate in surface or in recess including making connection, soldering etc. as required.

Smart-UPS On-Line, 30 kW /30 kVA with 30 minutes Backup 12 V 42 AH SMF Battery UPS Toplogy Double Conversion On-Line, Power Rating (VA / Watts) 30000Watts/30000VA, Form Factor Rack/Tower Convertible; Output Power Capacity 30000 Watts/30000 VA, Max Configurable Power 30000Watts/30000VA, Nominal Output Voltage 230V, Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage, Efficiency at Full Load 94.00%, Output Voltage Distortion Less than 3%,Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz,Crest Factor 03:01,Waveform Type Sine Wave, Output Connections (1)*Hard Wire 3-wire (8)*(H N + G) IEC 320 C13(8),Bypass Built-in Bypass, Output Short Circuit Protection Yes,Parallel Redundancy (Option) 1 + 1, Nominal Input Voltage 230V,Input Power Factor>0.98,Input Frequency 40-70Hz,Input Connections Terminal Block, Protection Thermal Circuit Breaker (250VAC/20A), Input voltage range for main operations full load 160 - 285V, Input voltage range for mains operation half load 160-285V, High Voltage withstand Capability 420 VAC, Green Mode Range 210-250 VAC (230 V), Battery Type Mintenance - free sealed Lead-Acid battery with suspended, electrolyte. 12V 42 Ah SMF battery for 30 Min Battery Back up.

SITC of 2MP IR Indoor Dome Fixed Camera- 1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, Color: 0.01 Lux at F1.2, ICR, ONVIF, support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Tripple individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, IK10, Edge Anlalytics- Line crossing detection, intrusion detection, Motion detection, video tampering, UL, CE, FCC certified. (DS-2CD3121G0-I (2.8 mm) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC of 2MP IR Bullet Fixed Camera -1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S), support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering, UL, CE, FCC certified. (DS-2CD3021G0-I (2.8 mm) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC of 64 ch Network Video Recorder - Connect Up to 64 IP Cameras, Dual OS, Up to 12 Megapixels Resolution, Two independent HDMI outputs, one HDMI output of 4K resolution,1 VGA output with output upto 1920 × 1080, Support H.265, MJPEG, Supports N+1 hot spare system,Supports RAID0, RAID1, RAID5, RAID6 and RAID10 ,Supports HDD hot swap, Supports Dual Power-Redundant, Incoming Bandwidth 320 Mbps, 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 6TB, 3 × USB at least 1 × USB with 3.0, Alarm I/O 16/4, RS-485, RS-232, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified. (DS-7764NI-I8) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC OF 32" LCD 24X7 Surveillance Monitor

SITC of 16 port Unmanaged Network PoE Switch: 24 port PoE Switch with PoE standard of IEEE 802.3af , IEEE 802.3at, PoE port, Uplink ports (DS-3E0326P-E) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC OF Cat-6 Cable: UTP CAT 6, 305 meters,Core diameter: 0.53mm,OFC,CM,white (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC of 6TB Surveillance Hard Disk (ST6000VX0023) (Approved Makes: Hikvision/ Honeywell/ Bosch)

19" 6U Rack for Switches complete as required

Camera installation and Connectivity.

In-ceiling speaker 6" ceiling loudspeaker. 6/3W @ 100V, 100-15,000Hz, 93dB 1W 1M. Dimensions (L x H): 188mm x 76mm, mounting hole 170mm diameter. White( Surface mount speakers to be provided if no provision for ceiling speakers) Make: Cloud UK, Alfatron, Biamp.

Media player, mixer amplifier with Bluetooth. Supplied with remote control. On board tuner and MP3 player. Inputs: Front panel mic. input with priority function, rear panel balanced mic. input with phantom power. Emergency input function. Dual RCA line inputs. Outputs: RCA aux out. 60W at 70/100V and 4-16 Ohms. 24V backup power input.Make:Biamp, Alfatron.

LCD portable projector, 5,000 lumens, WUXGA, 16,000:1 contrast ratio, Aspect Ratio:16:10, Lens (Throw Ratio)1.6x manual zoom (throw ratio: 1.09–1.77:1), manual focus F 1.60–2.12, f 15.30–24.64 mm, Make: Panasonic, Christe, Barco.

113" Diagonal, 16:10 Aspect Ratio, black border on all sides, matt white fabric, motorised with remote and heavy duty Motor. Make AV-craft, grandview.

Projector ceiling mount 1x2, adjustment option. Make TS, B-Tech, Eqv.

Cable Manager with Power socket and HDMI. Make Logic/ Legrand.

C–HM/HM/ETH–50 ( 50 feet) make Kramer / Extron.

Equipment Rack, with Hardware and lock. Make Valrack/ Custom / Eqv.

SITC of 50 LPH RO Water Purifier alng with RO-AUTO MAX 50 lph, hdrophenumatic tank-10 LPH, Faucet-1 nozzle, accessories- clip, inlet & outlet pipe etc.

Description of Work

Closed timbering over Area

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm diameter holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor.

Providing and laying in position cement concrete of specified grade.

All work above Plinth level upto floor V Level : Concrete of M-25 grade with minimum cement content of 330 kg/cum

TMTC-500- 08 mm dia.

TMTC-500- 10 mm dia.

TMTC-500- 12 mm dia.

TMTC-500- 16 mm dia.

TMTC-500- 20 mm dia.

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roots, landings, balcnies and access platform..

Lintels, beams, plinth bams, griders, bressumers and contilevers.

Columns,Pillars, Piers, Abutments, Posts and Struts

Weather shade,Chajjas, corbels etc. including edges

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in :

Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in

Brick work with bricks of class designation 100A in foundations and plinth in :

Half brick masonry with bricks of class designation 100A

12 mm cement plaster on rough side of single or half brick wall of mix : (1 : 6)

15 mm cement plaster on rough side of single or half brick wall of mix : (1 : 6)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile),...

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Detailing,Engineering,Manufacturing,Painting,Supply,transportation & Erection of steel structure system for PEB structure with Z purlin , sagrods runners , cross bracing clip fastners using 350 MFa grade Hitensible steel. All fabrication work shall be done off-shore (not on site) bolt in connection type and only site assembly shall be done with the help of high strength bolts (HSFG) . All testing and inspection facility shall be in-house to ensure 100% checking and inspection prior to shipment from the fabrication shop. All structure steel shall be min 350 Mpa yield strength of E350 grade or equivalent grade but not less than 350 Mpa as per approval of Engineer in-charge. All anchor bolts shall be high strength HSFG bolts for assembly and electro-galvanized of min. 8.8 grade. Entire steel structure shall be surface finished shot blasted as per SA 2 1/2 followed by applying 2 coat of epoxy base primer each coat of min. 35 micron and 2 coat of final finish epoxy paint shall be applied each of min. 35 micron thickness on entire structure prior to shipment. Final painting can be done at site during installation.All design & drawings shall be per-approved by Engineer in-charge

Supply & fixing of Hi-Rib profiled sheeting 1000-1030 cover width, 28/30 mm crests @ 250-255 mm c/c manufactured out of 0.55 mm TCT hi-tensile Multi Cloured Galvalume steel (AZ-150 gsm. Aluminium-Zinc alloy metallic coating of total both sides 550 Mpa yield stress as per AS-1397). The sheet shall have wide pans with 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on side laps for purlin support. The male end of the sheet shall have anti-capillary flute at side lap to prevent leakages. The sheet shall be passivated and clear resin coated. The sheet shall be fixed by means of galvanised self-drilling self tapping fasteners ( 12-14x55 with EPDM seals). The sheet shall be supplied in lengths maximum upto 6-12 Mtrs long to suit site dimensions

Supply and fixing of Multi Coloured galvalume sheet with screws on cladding.

Supply and fixing of Flashing /Ridge/ and gable flashing colour coated up to : Supply and fixing of Flashing /Ridge/ and gable flashing colour coated up to : 300mm - 500 mm girth.

Providing & Fixing GE plastic 600mm dia Turbo Vents of approved make and laying in position as per drawing or as directed by Engineer-in-charge

Providing & Fixing clear polycarbonate sheet 1000 mm wide & 1.5 mm thick of approved make and laying in position as per drawings matching profile with galvalium sheet or as directed by Engineer-in-charge

Supply and fixing of Colour coated gutters with gutter supports, sealnts

Providing & Fixging MS rain water pipe 100 x 125 mm of approved make in position as per drawings or as directed by Engineer-in-Charge.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T"...

Providing & Laying 2.0 mm thick Vinyl Flooring ( Armstrong / Wonderfloor, etc )

Providing and fixing soil, waste and vent pipes : Sand cast iron S&S pipe as per IS: 1729

Carriage of materials

Extra Cost of Materials

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS :7231, with all fittings and floors wherever required :

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

Meter

Meter

metre

metre

metre

quintal

Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931

Providing and fixing gun metal non- return valve of approved quality (screwed end)

metre

metre

Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc.as required

Point

Metre

Metre

Metre

Metre

Metre

Metre

Supplying and fixing PVC/G.I box of 200mm x 250mm x 60mm deep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required (Adopter box above each D.B).

Supplying and fixing PVC/G.I box of 75 mm X 75 mm X 50 mm deepdeep on surface or in recess with suitable size of phenolic laminated sheet cover in fornt including painting etc as required (Adopter box above each D.B).

Supplying and fixing 12 modules GI box along with moduler base & cover plate surface or in recess including providing and fixing of 4 nos 6 pin 15/16 amps socket outlet with 4 no 15/16A moduler type switch ,connection etc. as required.

Supply & fixing 4 way(4+12) double door TP & N, sheet steel, MCB distribution board, 415 volts, on surface/ in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required (But without MCB / RCCB / Isolator) light DB

Supply & fixing 4 way(4+12) double door TP & N, sheet steel, MCB distribution board, 415 volts, on surface/ in recess, complete with tinned copper busbar, neutral link, earth bar, din bar, detachable gland plate, interconnections, phosphatised and powder painted including earthing etc.as required (But without MCB / RCCB / Isolator) Power DB

S/F modular blanking plate on the existing modular plate and switch box excluding modular plate as required.

Main Bus Bar: 4 strip 300 amp bus bar made of electrical grade copper strip enclosed in separate bus bar chamber, provided with DMC/ SMC bus bar support duly insulated with heat shrinkable sleeves in distinct colours as reqd: 1 set (1 Amp per sqmm.)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as per required.

Supplying and fixing Cable end box (Loose wire box, IP43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240/415 V, on surface /recess complete with testing and commissioning etc. as required.

Providing and fixing MV danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

per set

Metre

Metre

Supply & Laying of ISI marked aluminium conductor XLPE insulated cable as per IS 7098, & cable & wirE shall be armoured, served, sheathed 1100 volts grade as per Batra Henley / Havells/ Finolex.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supply and fixing 100 mm dia medium class GI pipe etc as required.

Supply and Installation of regular/standard module AC ceiling fan of 1400 mm sweep including wiring the down rod of standard length 9 upto 30 cm ) with 1.5 sq mm FR pvc insulated copper conductor etc as required.

Supply and Installation of 300 mm 230volt AC exhaust fan in the existing opening including making good the damage connection testing commissioning etc as required.

Supply and installation of 600 mm, 230 V A.C. wall mounted Air circulator, heavy duty fan including fixing the bracket, making onnection, testing, commissioning etc as required.

Supplying and fixing indoor recess mounting 36 watt LED flat panel luminaire suitable for armstrong/grid ceiling and complete with electronic driver etc. directly on false ceiling including connection with 1.5 sqmm fR PVC insulated copper conductor cable and earthing the body etc as required.

Supplying and fixing 90 watt LED type FLOOD light with die cast aluminium housing for ingress protection of IP65 and complete with all accessories etc and connection with FR PVC insulated copper conductor cable and earthing the body etc. as required

Meter

Meter

Supply and fixing of fire extinguisher, ABC Type 4.00kg. Capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply and fixing of shock treatment chart (prescribed under I. E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material, labour, T&P for proper completion of work.

Supply and fixing of fire bucket, round bottom made of GI sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per direction of Engineer-in-Charge.

Providing and fixing carbon-di-oxide fire extingushers trolley mounted with all accessories internal discharge tube, high pressure discharge hose, discharge nozzle, suspension bracket, ISI marked as per IS:2878 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.

SITC AC split(1.5 ton) with stabilizer ISI standard as per specification 5 star inverter AC.. ( Make- blue star/mitsubishi/lg/carrier/Hitachi)

Extra copper piping electrical wire for split AC

Extra drain pipe split AC

Supplying and drawing of UTP 4 pair CAT-6 LAN cable in the existing surface/recessed steel /PVC concuitas required.

Category 6 UTP Patch Cords - 1 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact

Category 6 UTP Patch Cords - 2 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact

24-port GbE Smart Managed Switch with GbE Uplink Interfaces-24 Ports 10/100/1000Mbps+4 SFP;Port Standards & Functions-IEEE 802.3 10BASE-T Ethernet (twisted-pair copper),IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper),IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper),IEEE 802.3az compliance Auto-negotiation,IEEE 802.3x Flow Control; Full/Half Duplex-Full/half duplex for 10/100 Mbps speeds,Full duplex for Gigabit speed;Media Interface Exchange Auto MDI/MDIX adjustment for all twisted-pair ports;Switching Capacity 56 Gbps; Transmission Method Store-and-forward; MAC Address Table 16,000 entries per device, Maximum 64 bytes packet forwarding rate 41.7 Mpps,Packet Buffer Memory 1.5 MB,Maximum Power Consumption 22.45 watts, Standby Power Consumption 17.84 W/240 V, Acoustics 0 dBA Heat Dissipation 76.55 Btu/hr, Operating Temperature -5 to 50 ˚C (23 to 122 °F), Storage Temperature -20 to 70 ˚C (-4 to 158 °F), Operating Humidity 0% to 95% non-condensing, Storage Humidity 0% to 95% non-condensing, Diagnostic LEDs Link/Activity/Speed (Per 10/100/1000 Mbps port), Certifications CE (LVD) BSMICCC, C-Tick. Netgear / D-link/ Cisco.

Category 6, UTP 24-Port Patch Panel Size - 482.6mm x 44.2 (19’’ x 1U), Panel Material - Steel-fully powder coated, Unshielded - RJ 45, Plug Insertion Cycle - 750 times DC Resistance- 72Ω max, Voltage Rating - 72 Vdc max, Current Rating - 1.5A max

Supply fitting fixing Rack 19" 12U fully powder coated complete etc as required with complete accessories (5 amp x 6 socket, wire manager, rack fan) VALRACK/ Netrack make.

Supplying and fixing of RJ 45 computer socket suitable for Cat 6 on module GI box along with base & cover plate in surface or in recess including making connection, soldering etc. as required.

Smart-UPS On-Line, 30 kW /30 kVA with 30 minutes Backup 12 V 42 AH SMF Battery UPS Toplogy Double Conversion On-Line, Power Rating (VA / Watts) 30000Watts/30000VA, Form Factor Rack/Tower Convertible; Output Power Capacity 30000 Watts/30000 VA, Max Configurable Power 30000Watts/30000VA, Nominal Output Voltage 230V, Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage, Efficiency at Full Load 94.00%, Output Voltage Distortion Less than 3%,Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz,Crest Factor 03:01,Waveform Type Sine Wave, Output Connections (1)*Hard Wire 3-wire (8)*(H N + G) IEC 320 C13(8),Bypass Built-in Bypass, Output Short Circuit Protection Yes,Parallel Redundancy (Option) 1 + 1, Nominal Input Voltage 230V,Input Power Factor>0.98,Input Frequency 40-70Hz,Input Connections Terminal Block, Protection Thermal Circuit Breaker (250VAC/20A), Input voltage range for main operations full load 160 - 285V, Input voltage range for mains operation half load 160-285V, High Voltage withstand Capability 420 VAC, Green Mode Range 210-250 VAC (230 V), Battery Type Mintenance - free sealed Lead-Acid battery with suspended, electrolyte. 12V 42 Ah SMF battery for 30 Min Battery Back up.

SITC of 2MP IR Indoor Dome Fixed Camera- 1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, Color: 0.01 Lux at F1.2, ICR, ONVIF, support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Tripple individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, IK10, Edge Anlalytics- Line crossing detection, intrusion detection, Motion detection, video tampering, UL, CE, FCC certified. (DS-2CD3121G0-I (2.8 mm) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC of 2MP IR Bullet Fixed Camera -1/2.8"Progressive Scan CMOS, 1920 × 1080 at 25fps, 2.8 mm Fixed lens, 0.01 Lux at F1.2, 0 Lux with IR, ICR, ONVIF (PROFILE S), support H.265, H.264, MJPEG, DWDR, 3D Digital Noise Reduction, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, IP67, Edge Anlalytics- Line crossing detection, Intrusion detection, Motion detection, Scene change detection, Video tampering, UL, CE, FCC certified. (DS-2CD3021G0-I (2.8 mm) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC of 64 ch Network Video Recorder - Connect Up to 64 IP Cameras, Dual OS, Up to 12 Megapixels Resolution, Two independent HDMI outputs, one HDMI output of 4K resolution,1 VGA output with output upto 1920 × 1080, Support H.265, MJPEG, Supports N+1 hot spare system,Supports RAID0, RAID1, RAID5, RAID6 and RAID10 ,Supports HDD hot swap, Supports Dual Power-Redundant, Incoming Bandwidth 320 Mbps, 8 SATA Hard Disks, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 6TB, 3 × USB at least 1 × USB with 3.0, Alarm I/O 16/4, RS-485, RS-232, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified. (DS-7764NI-I8) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC OF 32" LCD 24X7 Surveillance Monitor

SITC of 16 port Unmanaged Network PoE Switch: 24 port PoE Switch with PoE standard of IEEE 802.3af , IEEE 802.3at, PoE port, Uplink ports (DS-3E0326P-E) (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC OF Cat-6 Cable: UTP CAT 6, 305 meters,Core diameter: 0.53mm,OFC,CM,white (Approved Makes: Hikvision/ Honeywell/ Bosch)

SITC of 6TB Surveillance Hard Disk (ST6000VX0023) (Approved Makes: Hikvision/ Honeywell/ Bosch)

19" 6U Rack for Switches complete as required

Camera installation and Connectivity.

In-ceiling speaker 6" ceiling loudspeaker. 6/3W @ 100V, 100-15,000Hz, 93dB 1W 1M. Dimensions (L x H): 188mm x 76mm, mounting hole 170mm diameter. White( Surface mount speakers to be provided if no provision for ceiling speakers) Make: Cloud UK, Alfatron, Biamp.

Media player, mixer amplifier with Bluetooth. Supplied with remote control. On board tuner and MP3 player. Inputs: Front panel mic. input with priority function, rear panel balanced mic. input with phantom power. Emergency input function. Dual RCA line inputs. Outputs: RCA aux out. 60W at 70/100V and 4-16 Ohms. 24V backup power input.Make:Biamp, Alfatron.

LCD portable projector, 5,000 lumens, WUXGA, 16,000:1 contrast ratio, Aspect Ratio:16:10, Lens (Throw Ratio)1.6x manual zoom (throw ratio: 1.09–1.77:1), manual focus F 1.60–2.12, f 15.30–24.64 mm, Make: Panasonic, Christe, Barco.

113" Diagonal, 16:10 Aspect Ratio, black border on all sides, matt white fabric, motorised with remote and heavy duty Motor. Make AV-craft, grandview.

Projector ceiling mount 1x2, adjustment option. Make TS, B-Tech, Eqv.

Cable Manager with Power socket and HDMI. Make Logic/ Legrand.

C–HM/HM/ETH–50 ( 50 feet) make Kramer / Extron.

Equipment Rack, with Hardware and lock. Make Valrack/ Custom / Eqv.

SITC of 50 LPH RO Water Purifier alng with RO-AUTO MAX 50 lph, hdrophenumatic tank-10 LPH, Faucet-1 nozzle, accessories- clip, inlet & outlet pipe etc.

Rs (in lakh)

Rs (in lakh)