ADDITION/ALTERATION AND SPECIAL REPAIR OF BUILDING NO. P-83, P-28, P-76, P-45, P-13 FOR INSTALLATION OF NEWLY PURCHASED EQUIPMENT/ PROCESSING PLANTS INSIDE TECHNICAL AREA DMSRDE, KANPUR UNDER GE (I) RnD KANPUR

Amount

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, complete all as specified and directed.

M&L for providing and laying for machine cut 20mm thick Kota stone slab flooring over 18-20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4, complete all as specified and directed.

M&L for cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete all as specified and directed.

M&L for providing and fixing for Kota stone slabs 18-20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete all as specified and directed.

M&L for providing and laying Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc complete all as specified and as directed.

M&L for providing edge moulding to 18 mm thick granite stone counters, platform, Vanities etc., including machine polishing to edge to give high gloss finish etc complete all as specified and as directed.

M&L for Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 above plinth upto floor level in CM 1:4 complete all as specified and directed.

M&L for Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (using 20 mm graded aggregate) complete all as specified and as directed.

Demolishing R.C.C. work manually/ by mechanical means including cutting, stacking of steel bars and disposal of unserviceable material within 50 metres lead complete all as specified and as directed.

M&L for centering and shuttering including strutting, propping etc. and removal of form for shelves complete all as specified and directed.

M&L for TMT bars of grade Fe-500D or more steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete all as specified and directed at any location upto 12m height complete all as specified and directed.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead etc complete all as specified and directed.

M&L for providing and applying 15 mm cement plaster on rough side of single or half brick wall of in CM 1:6 complete all as specified and directed.

M&L for providing and applying rendering 15mm thick in two layers (10mm + 5mm) in CM 1:4 on fair faces of brick work or concrete suraces finish even and fair without using extra cement (water proofing compound shall be measured and paid separately) complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of brick work or concrete surface of ceiling in cement mortar (1:3) finished even and smooth (without using extra cement) including dubbing coat complete all as specified and directed.

M&L for providing and applying for white washing three or more coats on newly plastered surface with lime to give an even shade complete all as specified and as directed.

M&L for providing and applying two or more coats water proofing cement base paint @ 3.84kg/10 Sqm of required shade on newly plastered surface complete all as specified and directed.

M&L for providing and applying two or more coats of distempering with oil bound washable distemper on new surfaces over and including water thinnable priming coat with cement primer of approved brand and manufacture to give an even shade complete all as specified and directed.

M&L for providing and finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Dismantling doors, windows and clerestory windows (steel or aluminium) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres and below complete all as specified and directed.

Dismantling doors, windows and clerestory windows (steel or aluminium) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area beyond 3 sq. metres complete all as specified and directed.

M&L for providing and laying 300x300mm chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, including 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand), light shade pigment using white cement complete all as specified and directed.

M&L for providing and laying 80mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete all as specified and as directed.

M&L for providing and laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as in sub base of specified grade excluding the cost of centering and shuttering complete all as specified and as directed.

Demolishing cement concrete 1:4:8 or leaner mix (or equivalent design mix) manually/ by mechanical means including disposal of material within 50 metres lead complete all as specified and as directed.

M&L for 75mm thick PCC type C-2, 1:3:6 (using 40mm grade aggregate) laid in alternative bays as in plinth protection / hardstanding, including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Taking down chowkhats of frames with shutters without taking off shutters of any description from the frame area exc 4.00 Sqm but not exc 6.00 Sqm each complete all as specified and directed.

M&L for providing and fixing rolling shutters 80x1.25 mm M.S. laths with 1.25 mm thick top cover of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters complete all as specified and directed.

M&L for greasing oiling of old steel rolling shutters any type, including minor repair and replacement defected part area n exc 6 sqm complete all as specified and directed.

M&L for chipping of unsound/weak concrete material average thickness 25mm from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc at any location upto 12m height and disposal of debris for all lead and lifts all complete all as specified and as directed. Note: Centering and shuttering shall be included in quoted rate.

M&L for Chipping of unsound/weak concrete material average thickness 50mm from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc at any location upto 12m height and disposal of debris for all lead and lifts complete all as specified and as directed. Note: Centering and shuttering shall be included in quoted rate.

M&L for Cleaning of reinforcement upto 12 mm diameter from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, at any location upto 12m height complete all as specified and as directed. Note: Centering and shuttering shall be included in quoted rate.

M&L for cleaning of reinforcement above 12 mm diameter from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, at any location upto 12m height complete all as specified and as directed. Note: Centering and shuttering shall be included in quoted rate.

M&L for Drilling suitable holes in reinforced or plain cement concrete upto and including 12mm dia bar with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, complete all as specified and as directed.

M&L for providing and fixing for application of anti-corrosive/ passivating coat of epoxy zinc primer as per manufacturer instruction on all exposed and cleaned reinforcement of RCC columns, beams, chajjas and slab at any location upto 12 metre height complete all as specified and directed Note: Centering and shuttering shall be included in quoted rate.

M&L for providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make just before repair at any location upto 12m height complete all as specified and directed.

M&L for providing and fixing for repair to damaged reinforced cement concrete portion for chajjas, slabs using micro concrete to Dr Fixit or equivalent as per manufacturer instruction in layers of 25mm to 50mm thick as required using necessary shotconcreting/ concrete pumping/ guniting equiptments etc complete at any location upto 12m height complete all as specified and directed. Note : (i) Work to be executed through specialised firm. (ii) Centering and shuttering shall be included in quoted rate.

M&L for providing and fixing for repair to damaged reinforced cement concrete portion for beams & column prepared using micro concrete to Dr Fixit or equivalent as per manufacturer instruction in layers of 50mm to 100mm thick as required using necessary shotconcreting/ concrete pumping equiptments etc complete at any location upto 12.00 m height complete all as specified and directed Note: (i) Cost of micro concrete of Dr Fixit will deemed to be included in quoted rates. (ii) Work to be executed through specialised firm. (iii) Centering and shuttering shall be included in quoted rate.

Dismantling 15 to 40 mm dia GI pipe including stacking of dismantled pipes (within 50 metres lead) complete all as specified and as directed.

M&L for providing and fixing medium grade 15mm bore galvanised mild steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.

M&L for providing and fixing 20mm dia G.I. pipes complete with G.I. fittings including trenching and refilling etc. complete all as specified and directed.

M&L for disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level complete all as specified and directed.

M&L for providing and fixing rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) of each tank 500 ltrs capacity hoisted and fixed in position complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20mm dia iron pipe and fixed (min wt 210 gram) complete all as specified and directed.

S&F in repair vitreous china white wash hand basin of size 550 x 400 mm including CI/MS brackets including cutting for and pinning in brackets complete all as specified and directed.

Supply only PVC connection 15 mm dia 600mmm long with 2 Nos PVC check nuts with washer complete all as specified and directed.

S&F in repairs 20mm gun metal gate valve Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply only Flexible (coil shaped) PVC waste pipe for sink and wash basin 32mm dia with length not less than 700 mm including PVC waste fittings all as specified and directed.

S&F in repair grating doom 125 mm dia with waste hole of PTMT, minimum weight 40gms complete all as specified and directed.

M&L for providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete all as specified and as directed.

S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F in repair of 600 mm x 450 X 4 mm thick bevelled edge looking mirror mounted on 3 mm thick pvc frame and fixed to wooden plugs with CP screws and washers complete all as specified and directed.

S&F in repair CP tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Dismantling asbestos or PVC rain water pipe any size with fittings and clamps including stacking the material within 50 metres lead etc complete all as specified and directed.

M&L for providing and fixing on wall face 110mm dia unplasticised Rigid PVC rain water single socketed pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, including taking down complete all as specified and directed.

Taking down chowkhats or frames with shutters without taking off shutters of any description from the frame area n exc 1.5 Sqm each complete all as specified and directed.

M&L for providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100 mm long anchor fasteners complete, all as per manufacturer's specification and all as specified and as directed.

M&L for providing and fixing factory made 30 mm thick PVC door shutters consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete all as specified and as directed, manufacturer's specification & drawing as directed by Engineer-in-Charge/GE.

M&L for providing and fixing anodized aluminium American type handle of size 8 - 8.8 inch with SS screws etc complete all as specified and as directed.

S&F for extruded aluminium alloy handles 125mm size, fabricated type, anodised complete all as specified and directed.

S&F for butt hinges in 100mm size, SS with galvanised mild steel hinges pin complete all as specified and directed.

M&L for providing and fixing aluminium tower bolts 200x10mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

M&L for providing and fixing aluminium tower bolts 100x10mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

M&L for providing and fixing aluminium sliding door bolts 300x16 mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc complete all as specified and directed.

M&L for providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg with stainless steel cover plate minimum 1.25 mm thickness, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete all as specified and as directed.

M&L for lettering with black Japan paint of approved brand and manufacture complete all as specified and as directed.

M&L for preparation of old surfaces of steel of any description, and applying one or more coats aluminium paint of approved brand and manufacture complete all as specified and directed.

M&L for preparation of old / new surfaces of steel of any description, and painting two or more coats with synthetic enamel paint of approved brand and manufacture to give an even shade complete all as specified and directed.

S&F in repair for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair white vitreous china laboratory sink size 600x450x200mm including plug, washer, and fixing on cantilever angle/bracket and connecting union to waste pipe complete all as specified and directed.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead etc complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs one way lab cock fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down for 15mm bore iron pipe for brass ferule complete all as specified and directed.

S&F in repairs 15 mm dia fancy type bib tap cast copper alloy CP with capstan head long body and cup screwed down for iron pipe complete all as specified and directed.

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of asbestos cement sheet.

M&L for Providing and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, using flats 30x6mm for diagonal braces and central cross piece all necessary fittings complete, including applying a priming coat of approved steel primer complete all as specified and as directed.

M&L for providing and fixing powder coated (50 micron) aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) etc complete all as specified and as directed.

M&L for providing and fixing 4mm thick glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and complete all as specified and as directed. (Cost of aluminium snap beading shall be paid in basic item)

M&L for providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and complete all as specified and as directed.

Dismantling of ceiling boards and wall (fibre, insulation, etc or perforates/ insulation boards) any thickness, including cover fillets & Snap Grid complete all as specified and directed

Providing & fixing false ceiling at all heights with sleek Grid and 12mm thick micro tegular edged GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non-combustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and complete all as specified and as directed.

Providing and fixing steel work in built up tubular electric resistance or induction butt welded tubes (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete all as specified and directed.

Dismantling 6 mm to 15 mm tile work in floor and wall laid in cement mortar including stacking material within 50 metres lead complete all as specified and directed.

M&L for providing and fixing Ist quality ceramic glazed wall tiles of size 450 x 300 x 7 mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete all as specified and directed.

M&L for providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4, jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc complete all as specified and directed.

M&L for providing and laying cement concrete in 1:2:4 (using 20 mm graded aggregate) as in coping/ kerbs/hold fast /stops rounded or chamfered on edges etc.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved complete all as specified and directed.

S&F in repair 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

M&L for cement concrete Type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power ) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

M&L for Point Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. complete all as specified and as directed.

Taking down sub main wiring any size from surfaces of walls, floors etc. and making good the disturbed surface complete all as specified and as directed.

M&L for wiring for circuit/ sub main wiring alongwith earth wire with size 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required complete all as specified and as directed.

M&L for wiring for circuit/ sub main wiring alongwith earth wire with size 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required complete all as specified and as directed.

M&L for wiring for circuit/ sub main wiring alongwith earth wire with size 2 X 4 sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required complete all as specified and as directed.

M&L for wiring for circuit/ sub main wiring alongwith earth wire with size 2 X 6 sq. mm + 1 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required complete all as specified and as directed.

M&L for wiring for circuit/ sub main wiring alongwith earth wire with size 4 X 4 sq. mm + 2 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required complete all as specified and as directed.

M&L for wiring for circuit/ sub main wiring alongwith earth wire with size 4 X 6 sq. mm + 2 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required complete all as specified and as directed.

M&L for wiring for circuit/ sub main wiring alongwith earth wire with size 4 X 16 sq. mm + 2 X 6 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required complete all as specified and as directed.

Supplying and fixing Modular switch 6 A switch one way on the existing switch box/ cover including connections etc. as required complete all as specified and as directed.

Supplying and fixing Modular switch 15/16 A switch one way on the existing switch box/ cover including connections etc. as required complete all as specified and as directed.

Supplying and fixing Modular 5 pin 6 A socket outlet on the existing switch box/ cover including connections etc. as required complete all as specified and as directed.

Supplying and fixing Modular 6 pin 15/16 A socket outlet on the existing switch box/ cover including connections etc. as required complete all as specified and as directed.

S&F ceiling rose 65 x 50mm 3 terminal AC 230 volt complete all as specified and directed.

Supplying and fixing GI box alongwith modular base & cover plate of size/module 1 or 2 Module (75mmX75mm) for modular switches in recess etc. as required complete all as specified and as directed.

Supplying and fixing GI box alongwith modular base & cover plate of size/module 3 Module (100mmX75mm) for modular switches in recess etc. as required complete all as specified and as directed.

Supplying and fixing GI box alongwith modular base & cover plate of size/module 8 Module (125mmX125mm) for modular switches in recess etc. as required complete all as specified and as directed.

Supplying and fixing GI box alongwith modular base & cover plate of size/module 12 Module (125mmX125mm) for modular switches in recess etc. as required complete all as specified and as directed.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required complete all as specified and as directed.

Supplying and fixing 8 way double door, single pole and neutral, sheet steel, MCB Distribution board, 240V, on surface/ recess complete with tinned copper bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. complete all as specified and as directed.

Supplying and fixing 12 way double door, single pole and neutral, sheet steel, MCB Distribution board, 240V, on surface/ recess complete with tinned copper bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. complete all as specified and as directed.

Supply & Fixing surface/ recess mounting, vertical type, 415 V, 4 way (4 + 12), Double door TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required complete all as specified and as directed.

Supply & Fixing surface/ recess mounting, vertical type, 415 V, 8 way (4 + 24), Double door TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required complete all as specified and as directed.

Supply & fixing DP Sheet steel enclosure on surface/ recess alongwith 25/32 amp 240 volts 'C' curve DP MCB complete with connections, testing and commissioning etc. as required complete all as specified and as directed.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required complete all as specified and as directed.

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required complete all as specified and as directed.

Supplying and fixing 30/32 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30/32 A "C" curve, TP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required complete all as specified and as directed.

Supplying and fixing 63 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required complete all as specified and as directed.

Providing and fixing 125 A, 16 KA, TP MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required complete all as specified and as directed.

Providing and fixing 150 A, 16 KA, TP MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required complete all as specified and as directed.

Providing and fixing 200 A, 26 KA, TP MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required complete all as specified and as directed.

Supplying and fixing MCB SPN 32 Amps 10 KA, 'C' series all as specified and directed.

Supplying and fixing MCB SP 6 to 32 Amps 10 KA , "C' series all as specified and directed.

Supplying and fixing MCB Triple Pole 20 Amps to 32 Amps 10 KA, 'C' series all as specified and directed.

Supplying and fixing MCB 4 pole 63 Amps 16 KA , "C' series all as specified and directed.

S&F surface and wall mounted 20 Watt LED tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver input voltage AC 230 V, 50 HZ complete all as specified and directed.

Supplying and fixing energy saving, IP65 environmental friendly, long life, exclusive innovative die-cast aluminium LED HighBay light with high power LEDs as light source,.80 W suitable for highlighting architectural structure and general purpose lighting . including cable 1.5 sqmm 3 core copper conductor complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for Armstrong/ Grid ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supplying and fixing energy saving, IP66 environmental friendly, long life, exclusive innovative die-cast aluminium LED Building security light , 25 W suitable for highlighting architectural structure and general purpose lighting . including cable 1.5 sqmm 3 core copper conductor complete all as specified and directed.

Excavation in trenches, for laying of pipe line not exceeding 1.5 mtr wide and not exceeding 1.5 meter in depth and getting out in soft/ loose soil complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/ loose soil complete all as specified and directed.

Removing excavated material in soft/ loose soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for spread fine river sand in trenches complete all as specified and as directed. NOTE: For measurement purpose, punned down thickness shall only be taken complete all as specified and as directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 , flat size 250mm x 150mm x 40mm over the cable after spreading the sand for cable protection complete all as specified and directed

Taking out old U/s cable any size from ground/ wall etc complete all as specified and as directed.

Supply, laying and testing XLPE insulated, strip armoured, heavy duty, aluminum conductor (stranded) cable 1100 volts grade cross sectional area 50 Sqmm 3.5 core laid in trenches/ducts, floors, through pipe, fixed to walls etc, including connecting both end with proper size of aluminium lugs duly crimped with dia press crimping device and cable gland complete all as specified and as directed.

Supply, laying and testing XLPE insulated, strip armoured, heavy duty, aluminum conductor (stranded) cable 1100 volts grade cross sectional area 70 Sqmm 3.5 core laid in trenches/ducts, floors, through pipe, fixed to walls etc, including connecting both end with proper size of aluminium lugs duly crimped with dia press crimping device and cable gland complete all as specified and as directed.

Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting connection complete all as specified and complete all as specified and as directed.

Supply & fix exhaust fans AC single phase 415 V of size 450 mm sweep with louver connection complete all as specified and as directed.

Taking down ceiling fan and refixing after servicing including oiling, greasing, painting including replacing metal down rod 4 feet complete all as specified and as directed.

Supply and fixing of split type air conditioner 1.5 Ton 5 Star Rating in copper wound compressor complete all as complete all as specified and as directed.

Supply and fixing of voltage stabilizer 4 KVA copper wound voltage stabilizer for 1.5 Ton air conditioning complete all as specified and as directed.

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size),Plastic/PVC Body complete all as specified and as directed.

Supply and fixed Reverse Osmosis plant of output capacity of 25 lits per hour complete all as specified and as directed.

Supply and fix water cooler electric driven (single phase), having approx storage capacity of 80 litre and nominal cooling capacity of 40 Litres per hour complete all as specified and as directed.

Supply & fix Fire alarm control panel complying with BS EN 54 2 loop panel of capacity from 99 detectors and 99 modules & upto 200 detectors per loop complete all as specified and as directed.

Supply & fix Detectors complying with and type certified to EN-45 Addressable type multisensor detector with heat and smoke combination photoelectric/ optical with base with self built intelligence as per IS: 11360 complete all as specified and as directed.

Supply & fix Fire alarm sounder / sirens electronic type horizontal single stage continuous normal operation for at least 50 minutes with sound level 65 DB TO 120 DB measured at 1.5 meter with sound output variation of +5 DB for 500 metre range complete all as specified and as directed.

Supply and fix Addressable manual call point break glass type with alarm LED complete all as specified and as directed.

Wiring for circuit/ sub main wiring alongwith earth wire with size 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required etc complete all as specified and as directed.

M&L for cutting of PCC/Hard standing/WBM road for passing cable including making good with PCC work all as specified and directed .

Supply, laying and testing XLPE insulated, strip armoured, heavy duty, aluminum conductor (stranded) cable 1100 volts grade cross sectional area 400 Sqmm 3.5 core laid in trenches/ducts, floors, through pipe, fixed to walls etc, including connecting both end with proper size of aluminium lugs duly crimped with dia press crimping device and cable gland complete all as specified and as directed.

Supply, laying and testing XLPE insulated, strip armoured, heavy duty, aluminum conductor (stranded) cable 1100 volts grade cross sectional area 150 Sqmm 3.5 core laid in trenches/ducts, floors, through pipe, fixed to walls etc, including connecting both end with proper size of aluminium lugs duly crimped with dia press crimping device and cable gland complete all as specified and as directed

Supply, laying and testing XLPE insulated, strip armoured, heavy duty, aluminum conductor (stranded) cable 1100 volts grade cross sectional area 185 Sqmm 3.5 core laid in trenches/ducts, floors, through pipe, fixed to walls etc, including connecting both end with proper size of aluminium lugs duly crimped with dia press crimping device and cable gland complete all as specified and as directed.

M&L in replacement of GI tubing light grade 80mm bore with fittings laid for protection of cable under road crossing fixed to walls or pole complete all as specified and as directed (clamps for fixing pipe, nuts, bolts washers shall be measured separately).

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground (Earth pit not less than 2.25 metre below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised earth strip 32 x 6.00 mm by means of bolts nuts check nuts and protection with 40 mm dia GI Medium grade pipe and washers of galvanised iron or steel, GI strip 7.5 mtr long and plate surrounded with salt charcoal dust etc and 20 mm bore GI light grade pipe for watering, excavation and earth wire including PCC pit in cement concrete 1:3:6 type CI and 40mm thick pit cover of RCC 1:2:4 type 30 reinforced width 8mm dia MS bar @ 150 C/C both ways, furnel wiremesh and testing after completion complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground (Earth pit not less than 2.25 metre below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4.00 mm by means of bolts nuts check nuts and protection with 15 mm dia GI Medium grade pipe and washers of galvanised iron or steel, GI strip 7.5 mtr long and plate surrounded with salt charcoal dust etc and 20 mm bore GI light grade pipe for watering, excavation and earth wire including PCC pit in cement concrete 1:3:6 type CI and 40mm thick pit cover of RCC 1:2:4 type 30 reinforced width 8mm dia MS bar @ 150 C/C both ways, furnel wiremesh and testing after completion complete all as specified and directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm Galvanised steel wire complete all specified and directed.

ARORA BROTHERS (BID ID -3451543)

Ashirwad Contractor and Supplier (BID ID -3451375)

A K BANDHUS (BID ID -3445875)

B.K.ASSOCIATES (BID ID -3440711)

M/s DKS Engineering Works (BID ID -3451769)

M/S SEWA AND SERVE BUILDERS (BID ID -3451333)