COMPREHENSIVE MAINTENANCE OF MD ACCN AT AHRR UNDER AGE BRI OF GE EM RR HOSPITAL, DELHI CANTT 10

Amount

Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

M&L for brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:6, finished the surface even and fair without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement, complete all as specified & directed.

M&L for 5mm thick rendering on concrete ceiling surfaces in cement mortar 1:3, finished the surface even and fair, complete all as specified and directed.

M&L for applying two coats of cement base wall care putty on plastered surface of walls and making the surface even & smooth for receiving distemper/ paint of any description, complete all as specified and directed.

All as per item No 08 here-in-before but on ceiling surfaces.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, complete all as specified & directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper, complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint over two coats of cement base wall care putty including one coat of weather resistant acrylic primer, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), and rubbish off the premises, complete all as specified & directed.

M&L 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes, complete all as specified & directed.

M&L 10 mm thick screed bed or bedding layer in cement mortar (1:4) to receive wall tiles, complete all as specified & directed.

M&L for double charged vitrified ceramic coloured tiles 8-9 mm thick (square/ rectangular) polished of light shade, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for double charged vitrified ceramic coloured tiles 8-9 mm thick (square/ rectangular) polished of light shade, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for vitrified ceramic coloured tiles 8mm to 9mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for vitrified ceramic coloured tiles 8mm to 9mm thick (square/ rectangular) polished of light shade, area of each tiles not exceeding 0.36 sqm, in dado/ skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified & directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in dado/ skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified & directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified & directed.

M&L for coloured glazed ceramic wall tiles as in vertical surfaces of size 450 mm x 300 mm x 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified & directed.

M&L for coloured glazed ceramic wall tiles as in vertical surfaces of size 600 mm x 300 mm x 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified & directed.

Demolition of stone slabs or tiles of any description or thickness in any position laid, bedded and pointed in any mortar, complete all as specified & directed.

M&L for 16-18mm thick granite of any type (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2), using marble dust with admixture of pigment to match with shade of granite including 10mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

Providing edge moulding to 16-18mm thick granite stones of any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified.

M&L for cement concrete 1:5:10, type E2 (using 40mm graded aggregate), as in sunken flooring, complete all as specified and directed.

M&L for rendering 15mm thick cement screed in CM 1:4 on brick or concrete surfaces using integral water proofing (3% by weight) for floor and sides of wall, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified.

M&L for sealing of pipe peneration toilets core cutting & sunken slab atment in following stages:- Supply and apply solvent free, moisture intensive epoxy resin based patch repair putty Sikagrade-694F (I), yeild : 0.6 Ltr/kg suitable for submerged condition having compressive strength of 40 N/mm2 (1 day) according to IS 9162-1979 on pipe peneration surface. The putty shall be appllied to a groove thickness of minimum 20mm on pipe peneration joints to concrete etration of surface of sunken portion and M&L for glass fibre reinforced acrylic modified cementtitious coating system as Top cost : Sika Top Seal - 107 @ 1.5 kg/sqm over reinforcement : Sika Fab-1 over base coat : Sika Top Seal-107 1.5 kg/sqm etc all as specified and directed system should have compressive strength 20 N/mm2, Bond strength 2.0 N/mm2, complete all as specified and directed. Note: (a) Entire work shall be carried out through manufacturer or its authorised representive. (b) The contractor shall furnish a 10 years guarantee for effectiveness of water proofing.

M&L for 25mm thick cement concrete 1:2:4, type B-1 (using 12.5mm graded aggregate) as in flooring, complete all as specifie and directed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc 1.50 sqm each, complete all as specified & directed.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc 1.50 Sqm but n.exc 4.00 sqm each, complete all as specified.

Taking down shutters of any description area exc 1.00 Sqm but n exc 2.00 sqm each, complete all as specified & directed.

S&F pressed steel frames made out of mild steel 1.25mm thick sheet, with with size of frame 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and applying a shop coat of red oxide primer including prividing PCC 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) for filling back of chowkhats, complete all as specified & directed.

S&F pressed steel frames made out of mild steel 1.25mm thick sheet, with with size of frame 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and applying a shop coat of red oxide primer including prividing PCC 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) for filling back of chowkhats, complete all as specified & directed.

S&F 35 mm thick, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), supplied and fitted to chowkats second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply. the size of rail and stile as per IS: 1003 (Part-I), complete all as specified.

M/L 35mm thick 2nd class hard wood glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a), complete all as specified.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels commercial type with both faces, complete all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel 100mm size, complete all as specified and directed.

S&F 150 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium complete alloy all as specified and directed.

S&F mild steel ordinary rat tail rod pattern springs including roller and roller plate complete 300mm length, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing (colour & pattern as approved by Engr-in-Charge), complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling & fixing in opening as per specification and drgs, complete all as specified.

S&F 100 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

Supplying, fabricating & fixing in repairs aluminium powder coated glazed three track sliding window of frame 100x44x1.5mm and sliding shutter of section 40mmx19mm including 3mm thick sheet glass, ordinary quality exc 0.50 sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.30mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all fittings and locking arrangement with each moving leaf etc, complete all as specified and directed by Engr-in-Charge.

S&F aluminium window and ventilator shutters with powder coating (minimum thickness of powder coating 50 micron) of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21, 100mm long (2 no.), suitable handle (1 no.), complete all as specified

M&L for preparation of new wooden surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthatic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for prepration of old wooden surface of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthatic enamel paint, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Dismantling boarding any description, fixed in any position with screws, complete all as specified & directed.

S&F 18/19mm thick PVC moulded solid board, one side pre-laminated for cabinets boxes, shutters etc with shelf and shutters, full size fitted under/ above kitchen cooking platform and other platform, complete all as per manufacturer's instruction complete all as specified and directed.

S&F in repairs 18mm thick medium density fibre board, exterior grade, fixed to timber framework as in cupboard and cupboard shutters including leeping/ beading fancy type with screws, complete all as specified and directed.

S&F soft closing clip on hinges, full/ half overlay type, of stainless steel of size as per site requirement complete all as specified and directed.

S&F100mm size stainless steel handles with matt finish fixed with screws, complete all as specified & directed by Engr-in-Charge.

S&F brass two lever keys, locks, cupboard grade I of size 50mm suitable for cupboard door/ drawer, complete all as specified & directed.

S&F stainless steel telescopic type ball bearing slide and runner, suitable for drawers of size as per site requirement, complete all as specified & directed.

S&F in repairs 12mm thick plywood grade BWR, type BB with 7 Nos of ply fixed with screws to timber farme work, complete all as directed and specified.

S&F in repairs continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (when oepn) 40mm, complete all as specified and directed.

S&F in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed.

S&F 4mm thick plain/ frosted glass, ordinary quality and glazing with glazing clips/oil putty in squares not exceeding 0.50 sqm in each pane, complete all as specified and directed.

S&F 4mm thick plain/ frosted glass, ordinary quality and glazing with glazing clips/oil putty in squares exceeding 0.50 sqm in each pane, complete all as specified and directed.

S&F 4mm thick figured glass, pin headed type in squares n.exc 0.5 sqm each pane, as in aluminum window/ ventilator/ door, including rubber packing and aluminium beading, complete all as directed.

S&F in repairs galvanised mild steel wire cloth 0.40 mm nominal dia of wire and average width of aperture 1.30 mm fixed with tinned tack or galvanised wire staples or fixed with nails and wooden beads, complete all as specified and directed

S&F in repairs stainless steel curtain rod 20-22mm dia including brackets, side knobs, fanials etc, fixed to walls, complete all as specified and directed.

S&F in repairs 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed.

S&F in repairs 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.

S&F in repairs 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed.

S&F in repairs 150mm size aluminium alloy handle, fabricated type, anodised, complete all as specified and directed and directed.

S&F in repairs 100mm size aluminium alloy handle, fabricated type, anodised, complete all as specified and directed and directed.

S&F in repairs 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of overall length 140mm, complete all as specified and directed.

S&F in repairs door closer aluminium (die casted) body, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

S&F in repairs door strip 45mm width comprising of aluminium holds & brush strip fixed at bottom of door shutter with screws, complete all as specified and as directed.

S&F in repairs mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete 200mm length, complete all as specified and directed.

S&F in repairs hasp & staple, 125 size, safety type aluminium anodised with mild steel hinge pin including bolt, to hinge plate and fixed with screws, complete all as specified and directed.

S&F in repairs brass two lever keys, locks, cupboard grade I of size 50mm suitable for cupboard door/ drawer, complete all as specified & directed.

S&F in repairs magnetic catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, complete all as specified & directed.

S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, complete all as specified & directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified.

S&F in repair white vitreous china wash hand basin (flat back) of size 550 x 400 mm fixed on and including new brackets complete including 32 mm size brass chromium plated waste coupling, PVC waste pipe etc, complete all as specified and directed.

S&F in repairs waste coupling of PTMT (half or full threaded), minimum weight 45gms, suitable for discharge pipe of 32mm bore dia, complete all as specified & directed.all as specified.

S&F in repairs 32mm dia and 75cm long PVC waste pipe including tail for WHB, urinals etc, complete all as specified.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified & directed.

S&F in repairs plastic water closet seat cover, white closed pattern with flat bottom, mild steel chromium plated or aluminised hinging device, complete all as specified & directed.

S&F in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 440 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and directed..

S&F in repair PVC low level flushing cistern, valve less, syphonic action type, double push bottom, 9-10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection, complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified & directed.

S&F in repairs waste coupling of PTMT (half or full threaded), minimum weight 60gms, suitable for discharge pipe of 40mm bore dia, complete all as specified & directed.all as specified.

S&F in repairs 40mm dia and 75cm long PVC waste pipe including tail for stainless steel sink etc, complete all as specified.

S&F in repairs brass chromium plated shower rose (with arm) 125mm with or without swivel joints, including fixing to steel pipe or union, complete all as specified.

S&F in repairs bib taps, cast copper alloy, fancy tyoe, with crutch or butterfly handle, chromium plated, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified & directed.

S&F in repairs stop valves, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore, complete all as specified & directed.

S&F in repairs two way angle cock chromium plated for fixing with flusing cistern/ jet spray/ health faucet etc, complete all as specified & directed.

S&F in repairs pillar taps, cast copper alloy, fancy type, chromium plated with capstean head screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts, screwed for 15mm bore pipe, complete all as specified & directed.

S&F in repairs WHB mixer without pop up waste system, long body, made of cast copper alooy, chromium plated fancy type, suitable for 15mm bore pipe, complete all as specified & directed.

S&F in repairs 2 in 1 wall mixer with provision for overhead shower with 115mm long bend pipe on upperside with built in non return valve connecting legs & wall flange made of cast copper alooy, chromium plated fancy type, complete all as specified & directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm, all as specified & directed.

S&F in repair tubular towel rail stainless steel chromium plated D type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and directed.

S&F in repair towel ring round/ square shape of suitable size made of cast copper alloy, chromium plated, complete all as specified and directed.

S&F in repairs health faucet (ABS body) mild dteel chromium plated for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position, complete in all respect as specified.

S&F in repairs soap dish, brass CP any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repairs toilet paper holder of brass, cromium plated fixed to walls with chromium plated (CP) brass screws, complete all as specified.

S&F in repairs corner glass shelf with bracket and fixing accessories, complete all as specified and directed.

S&F in repairs PVC made multipurpose cabinet with front door looking mirror of overall minimum size 350 x 450mm, complete all as specified and directed.

S&F in repairs brass chromium plated bottle traps 32mm bore of trap for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed including removing old trap to store, complete all as specified and directed.

S&F in repairs stainless steel glossy finish grating of square shape of size 150mmx150mm with hinge type openable jali of 100mm dia size with and including fixing with cement mortar to floor/ nahani trap etc, complete all as specified and directed.

S&F in repairs heavy duty stainless steel peg set of minimum size 450mm x 50mm with 6 pegs fixed on to walls/ doors with screws and necessary fittings, complete all as specified and directed.

Supply and fix in repair 500 litres capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and directed.

Supply and fix in repair 1000 litres capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and directed.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated alumium rod and high density plastic ball complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore of pipe, complete all as specified and directed.

S&F in repairs tank cover suitable for overhead water tanks of capacity not exc 500 litres, complete all as specified and directed.

S&F in repairs tank cover suitable for overhead water tanks of capacity exc 500 litres but n exc 1000 litres, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes of capacity exc 250 litres but not exc 500 litres etc. including writing date of cleaning on the tank, complete all as specified and directed. (Note: Rates of material required for writng the date of cleaning are included in the rates of this item and nothing shall be paid extra.)

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes of capacity exc 500 litres but not exc 1000 litres etc. including writing date of cleaning on the tank, complete all as specified and directed. (Note: Rates of material required for writng the date of cleaning are included in the rates of this item and nothing shall be paid extra.)

M/S VERMA BUILDER

M/s SAAR ENGINEERS

ACR ENTERPRISES

a.k constructions

tomar and associates

V.K. Enterprises