8304-REPAIR TO ROOF TREATMENT, JOINERY, PLUMBING, PLASTERING AND CERTAIN B/R WORK FOR MD AND OTM ACCN AT MH COMPLEX, APS AND DAD RESIDENTIAL COMPLEX UNDER GE STM CHENNAI

Amount

Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit.

All as per item No 1 here in before but n exc 1.5 Sqm each

Taking down shutters of any description area exc 1.00 Sqm and n exc 2 Sqm each.

Taking down shutters of any description area n.exc 1.00 Sqm each

Taking down shutters of any description area exc 2 Sqm each and refixing in same opening after necessary repairs/re-size

Taking down shutters of any description or type area exc 1.00 Sqm and n.exc 2 sqm and refixing in same opening after necessary repairs/re size

Taking down shutters of any description or type area n.exc 1.00 Sqm and refixing in same opening after necessary repairs/re-size

Forming jambs, etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete with CM 1:4 all as specified

Cutting holes in brick wall built in cement mortar or cement lime mortar and stone walls built in lime mortar exc half brick but not exc one brick ( Depth of embedded portion of holdfasts or lugs measured from face of jamb in to the wall) all as specified

M&L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints

M&L for second class hard wood 35mm flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides

M&L for second class hard wood 35mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers.

M&L for second class hard wood 30mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers. In windows and ventilators are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b)

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows

M&L for FI 25x3mm for hold fasts stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay),conforming to Fe 290 GDE E-165

Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & grith, not otherwise described & treated with tar or coal tar black paint treating ends of posts, backs of Chowkats, etc., area tarred exc 0.1 sq.m but n exc 0.5 sq.m. each

Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & grith, not otherwise described & treated with tar or coal tar black paint treating small articles such as stop, covers, gully gratings, holdfasts, ends of post, backs of Chowkats, etc., area n exc 0.1 sq.m each

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in opening including making good to the jambs as per specification all as directed. Note: The quote rate shall be inclusive of following:- (i) Existing/new wall edges shall be finished properly in cement plaster in CM 1:4 including supply and fixing of 6 Nos wooden plugs for catch door frame size not exc 17 sqcm average sectional area and 100mm long. (ii) Frame shall be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS Screw, 3 each on either side

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & as directed.

S&F SS Butt hinges,100mm medium weight and fixed

S&F SS Butt hinges, 75mm medium weight and fixed

S&F 100mm Butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21

S&F extruded aluminium alloy handles,150mm fabricated type anodized

S&F extruded aluminium alloy handles,100mm fabricated type anodized

S&F Aluminium, 150mm anodized, barrel tower bolts extruded section & fixed

S&F Aluminium, 100mm anodized, barrel tower bolts extruded section & fixed

S&F Aluminium alloy, anodized, 250mm sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed

S&F mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F 150mm Floor door stopper of aluminium alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor

S&F shutter, hooks & eyes Aluminium of size 150mm

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats synthetic enamel paint over one coat of prink primer

Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads.

S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane

S&F in repairs Aluminium anodised tubular curtain rod 20mm dia with brackets.

S&F in repairs prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.

M&L for 6mm thick teak wood lipping for external of 18/19 thickness of board

S&F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanized

S&F 100mm Hasp & staple, safety type, aluminium with mild steel hinges pin including bolt to hinges plate & fixed with screw

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 16mm complete including taking down all as specified as specified

Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 20mmm complete including taking down all as specified as specified

Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 25mm complete including taking down all as specified as specified

Supplying and laying of brass elbow of 16mm for CPVC pipe outer diameter of 16mm

Supplying and laying of brass Tee of 16mm for CPVC pipe outer diameter of 16mm

Supplying and laying of brass Elbow (3/4 x 1/2) of 16mm for CPVC pipe outer diameter of 16mm

M&L for taking up or down steel tubing and connections, including cleaning for refixing of GI water tubing of 15mm bore all as specified and directed

M&L for taking up or down steel tubing and connections, including cleaning for refixing of GI water tubing of 20mm bore all as specified and directed

S&F in repairs vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor .

S&F in repair Vitreous China wash down water closet (pedestal pattern), white (excluding flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, seat cover etc, complete all as directed

S&F in repairs vitreous China wash basin, white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S&F in repairs 10 liters capacity PVC low level flushing cistern complete with ISI marked body and ISI marked syphon complete all as directed

S&F in repairs 15mm fancy type chromium plated angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed

S&F in repairs 15mm bore bib cock long body with flange, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified

S&F in repairs 15mm bore pillar cock, fancy type chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed complete all as directed

S&F in repairs CP wall mixer with for mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe

S&F in repairs Bath room PVC cabinet mirror of size 350mm x 450mm (Make : prayag Cat part No 551 or equivalent make as listed in PS)

S&F in repairs towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and plastic cleats (Minimum weight 190 gms)

S&F in repairs chromium plated 125mm shower roses with or without swivel joints, any size, including fixing to steel pipe or union

S&F sinks with drainage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm

Supply and fix Bib cock two way double Handle with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15mm bore for brass ferrule and fixed all as specified Make: Prayag- Cat Part No 8312 or equivalent make as listed in PS)

S&F kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 900x750x200mm, duly assembled and fixed to wall with wall screws / fasteners all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F stainless steel Soap Dish Make : Jaquar AHS-1531 or equivalent make as listed in PS

S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device.

S&F in repairs PVC gully trap with cover of size 125mm including PCC bed complete all as directed.

S&F 75mm PVC (SWR) floor trap, plain with grating incl jointing with solvent cement etc. complete.

S&F PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints laid in trenches/floors or walls all as specified.

S&F PVC (SWR) bends 75mm bore

S&F PVC (SWR) bends with access door 75mm bore

S&F 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal with access door

S&F PVC SWR vent cowl 75mm bore

S&F PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints laid in trenches/floors or walls all as specified.

S&F PVC (SWR) bends 110mm bore

S&F PVC (SWR) bends with access door 110mm bore

S&F 110mm PVC (SWR) junction single (single T) equal or unequal with access door.

S&F PVC SWR vent cowl 110mm bore

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters and similar work conforming to Fe 290 Gde E-165

M&L for painting new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/zinc chrome primer incl preparation of surfaces .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for non skid ceramic tiles each tile area (sqr/rectangle) exc 0.06Sqm but not exceeding 0.11Sqm tile thickness 7 to 8 mm, in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 for floor finishing complete all as specified and as directed.

M&L for vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles n exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 for floor finishing complete all as specified and as directed.

M&L for ceramic coloured tiles, Non skid, area of each tile exc 0.18sqm and not exc 0.38sqm (square / rectangle) 7 to 8mm thick mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 for floor finishing complete all as specified and as directed.

M&L for Vitrified/ Non skid ceramic tile in vertical surfaces dado/skirting including CM 1:3, 10mm thick backing coat complete all as specified and as directed.

M&L for glazed coloured ceramic tiles in vertical surfaces 350x250x7/450X350X7 mm thick etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match incl 10mm thick backing coat CM 1:3 dado/skirting complete all as specified and as directed

Demolition of existing roof treatment of any description completely and brushing the cleaned surfaces of concrete with neat cement slurry @ 3Kgs of cement per sq.m. complete all as specified and as directed. remove all the debris from site and rubbish off the premises complete all as specified and as directed

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate over the roof slab, finished even and fair without using extra cement all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:3, mixed with water proofing compound over the levelling course while the concrete is green, finished even and smooth without using extra cement all as directed. Note: WPC shall be measured and paid separately.

Supply only liquid water proofing compound with ISI marked

M&L for APP Modified prefabricated five layer water proofing membrane, not less than 3 mm thick and weighing not less than 3.80 kg/sqm reinforced with non woven polyester matt black finished over compatible primer @ 0.3 Ltrs per sqm, torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint over a coat of blown bitumen 85/25 grade @ 1.20Kg/Sqm over the membrane. The Overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Manufacturers: STP/ IWL India Ltd / SAPL (ARGO-P) / Hydrotech Limited (Hydroflame) / TIKIDAN Note: The work shall be carried out by authorized applicators of manufacturers

S&F powder coated anodised aluminium frame for sliding windows, ventilators and with one or more rebates including joining cleat and handles and other necessary fittings for fixing etc., complete all as specified and directed.

S&F powder coated anodized Aluminium doors, window and ventilators shutters, without sash bar, aluminium section weighting 0.55kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc complete all as specified and directed.

S&F in repairs 15mm fancy type chromium plated with long shank and cup concealed type angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs

S&F Door closer hydraulically regulated (Aluminium extruded section body), designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed complete all as specified and as directed

S&F triple layered rotational moulded polyethylene water storage tanks 500 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 3 no's 20mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms, incl proper locking arrangements complete all as specified including dismantling old tank.

S&F triple layered rotational moulded polyethylene water storage tanks 1000 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 3 no's 20mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms, incl proper locking arrangements complete all as specified including dismantling old tank.

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed (Minimum weight 20mm-210gms) complete all as specified and as directed

S&F in repairs 20 mm bore of Gun metal globe or gate, valves with iron screwed both ends for iron pipe and fixed complete all as specified and as directed

S&F in repair Vitreous China Urinal, Half stall type size (345x320x560mm) coloured/white complete fixing with suitable fixing arrangements to wall with and including domed waste coupling and waste pipe complete, all as directed.

G.JANAKIRAMAN CO