Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹245.76Accepted-AOC | ₹245.76 Quoted ₹290 | L1 | Accepted-AOC ok |
| 2 | H₹295Rejected-Finance | ₹295 | H | Rejected-Finance high rate |
| 3 | Rejected-Technical | - | - | Rejected-Technical standard Samples are not found |
| 4 | Rejected-Technical MANDLA | MANDLA | MADHYA PRADESH | 481661 | - | - | Rejected-Technical standard Samples are not found |
| 5 | Rejected-Technical | - | - | Rejected-Technical Some Document not complete |
| Sl No | Description | Qty | Unit | VISHAL INDUSTRIES | SAI INDUSTRIES |
|---|---|---|---|---|---|
| 1.00SPECICATION FOR PRE STRESSED RCC FENCING POLES | |||||
| 1.01 | Pre-stressed reinforced RCC Fencing poles sizes: 2.0 mtr.
There shall be 4 nos. of vertical reinforcement of high tensile steel wire of 4mm dia. Each fencing pole shall be of square cross section of 100mmx100mm. Each fencing pole shall be provided with 6 nos. holes. Top hole shall be provided at 100mm below the top of pole and bottom hole should be provided at 500mm above the bottom of the pole. The central distance between the top and bottom hole shall be equally divided for remaining holes. 'J' hooks shall be of 6mm dia MS bars with proper threads at one end and nut and washer for tightening purpose. These 'J' bolts shall pass through the holes of poles.
General requirements
a. Material The materials used for the manufacture of pre stressed reinforced cement concrete fencing poles shall comply with the requirements as per relevant IS specifications (with upto date amendments).
The concrete Mix shall confirm to requirements of M 30 grade as laid down for controlled concrete (also called design mix concrete) in IS-1343 (code of practice for pre stressed concrete) and IS-456 (code of practice for plain and reinforced concrete) (with upto date amendments)
Reinforcing bars and wires used for the manufacture of pre-stressed concrete poles shall conform to the relevant Indian Standards. The surface of all reinforcement shall be free from loose scale, oil, grease, clay of other material that may have deteriorating effect on the bond between the reinforcement and the concrete.
b. Manufacturing
The manufacturer shall supply when required by the purchaser results of compressive test conducted in accordance with IS:456 or any other equivalent standards on concrete cubes made form the concrete used for the poles. If the purchaser so desires the manufacturer shall supply cubes for test purpose and such cubes shall be tested in accordance with IS:456 or any other equivalent Standards. The manufacturer shall maintain test records for the tests carried out to establish conformity.
Surface shall be uniform and free from voids. Poles shall be free from surface defects including hair cracks.
The ends of the pre-stressing wire shall be cut as close to the surface of the pole as possible and in any case shall not project more than 3mm.
c. Inspection
(i.) Material shall be inspected by Third party as mention in supply order before dispatch to ensure conformity with the specification.
(ii.) Destructive test shall be carried out for checking reinforcement of pole. One piece shall be destructed per supply order. Cost of destroyed piece shall be borne by manufacturer and its cost shall be inclusive while quoting rates.
(iii) Unit shall have to provide/Test certified for M-30 Grade concrete mix. To the consignee/ Inspecting agency as mention in supply order. | 1 | Nos | 250 ₹295 | 245.76 ₹290 Lowest |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
7 Mar 2026, 6:00 pmClosed
DFO (T) Narmadapuram
DFO (T) Narmadapuram
Purchase of PRE STRESSED RCC FENCING POLES
2026_MPFD_486392_1
12
Open Tender
Miscellaneous Goods
Item Wise
7 days
Narmadapuram
Please refer Tender Document
7 documents required · 7 mandatory
₹500
Yes
₹1 L
Yes
24 Jun 2026
28 Feb 2026
9 Mar 2026
28 Feb 2026
7 Mar 2026
28 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1SPECICATION FOR PRE STRESSED RCC FENCING POLES | |||||
| 1.01 | Pre-stressed reinforced RCC Fencing poles sizes: 2.0 mtr.
There shall be 4 nos. of vertical reinforcement of high tensile steel wire of 4mm dia. Each fencing pole shall be of square cross section of 100mmx100mm. Each fencing pole shall be provided with 6 nos. holes. Top hole shall be provided at 100mm below the top of pole and bottom hole should be provided at 500mm above the bottom of the pole. The central distance between the top and bottom hole shall be equally divided for remaining holes. 'J' hooks shall be of 6mm dia MS bars with proper threads at one end and nut and washer for tightening purpose. These 'J' bolts shall pass through the holes of poles.
General requirements
a. Material The materials used for the manufacture of pre stressed reinforced cement concrete fencing poles shall comply with the requirements as per relevant IS specifications (with upto date amendments).
The concrete Mix shall confirm to requirements of M 30 grade as laid down for controlled concrete (also called design mix concrete) in IS-1343 (code of practice for pre stressed concrete) and IS-456 (code of practice for plain and reinforced concrete) (with upto date amendments)
Reinforcing bars and wires used for the manufacture of pre-stressed concrete poles shall conform to the relevant Indian Standards. The surface of all reinforcement shall be free from loose scale, oil, grease, clay of other material that may have deteriorating effect on the bond between the reinforcement and the concrete.
b. Manufacturing
The manufacturer shall supply when required by the purchaser results of compressive test conducted in accordance with IS:456 or any other equivalent standards on concrete cubes made form the concrete used for the poles. If the purchaser so desires the manufacturer shall supply cubes for test purpose and such cubes shall be tested in accordance with IS:456 or any other equivalent Standards. The manufacturer shall maintain test records for the tests carried out to establish conformity.
Surface shall be uniform and free from voids. Poles shall be free from surface defects including hair cracks.
The ends of the pre-stressing wire shall be cut as close to the surface of the pole as possible and in any case shall not project more than 3mm.
c. Inspection
(i.) Material shall be inspected by Third party as mention in supply order before dispatch to ensure conformity with the specification.
(ii.) Destructive test shall be carried out for checking reinforcement of pole. One piece shall be destructed per supply order. Cost of destroyed piece shall be borne by manufacturer and its cost shall be inclusive while quoting rates.
(iii) Unit shall have to provide/Test certified for M-30 Grade concrete mix. To the consignee/ Inspecting agency as mention in supply order. | 1 | Nos | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
documents.pdf
Tender Documents • 5.83 MB
BOQ_572166.xls
BOQ • 0.33 MB
corrigendum.pdf
PDF • 0.06 MB
corrigendum.pdf
PDF • 0.14 MB
corrigendum.pdf
PDF • 0.19 MB
corrigendum.pdf
PDF • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .