94 H(F)(W)/2025-26

Part - A ( Material) Following Material Supplied by the Contractor:-

Supply of G.I. Pipe 6'' dia with Clamp and Nut Bolt

Supply HDPE Pipe PE-80, PN-6, DN-200 mm dia pipe for laying of 33 KV 3x300 sqmm

Supply HDPE Pipe 80 PN 160mm dia

Supply of Gland (63,50,28,25 mm & as Per Cable Size)

Supply of Pre Cost for B type Pannel

Supply of Pre Cost for C type Pannel

Supply of HDPE Pipe 140 MM with Cable

Supply of HDPE Pipe 140 MM

M/s angle iron 125x65x6mm, 4300 mm long bracing with 4 Clamp

M/s galvoincsed channel 125x65x6mm, 3200 mm Clamp bolt nut and Washer

M/s galvoincsed Top channel 100x50x6mm, 3200 mm Clamp bolt nut and Washer

Stone Pad 300x300x75 mm

33 KV Pin Insulator

33 KV Pin with Nut

11 KV V typre X- Arm

11 KV F- Clamp

X Arm holding Clamp

Dropper Angle

Aluminum lug for 10 KVA T/F

T-off Channel

11 KV Disc Insulator

11 KV Disc fitting

11 KV Pin Insulator

11 KV Pin with Nut

Nut & Bolt off Size

PG Clamp off size

Holding Clamp for Different Size

Aluminium lug 300 sqmm

Lug All type with different size

S/S Base

11 kV TPMO SET

Copper L-Piece 50*225*10mm

Aluminium lug for Transfomer As Per Installed T/F

MS Top Channel 125*65*2240

Dropper channel

Stay Clamp with Nut and Bolt

Holding clamp for TOP Channel, TPMOSET & Fuse wire with Bolt and Nut

11 KV Fuse Set

GI Pipe Clamp

Route Marker Sign

Part A : For 33 kv & 11 KV Line The work of safe carriage of the following material with loading/unloading from store centre Darshan Nagar to site of work. (Approx. Distance 0 to 20 Km.)

ST Pole 11 Mtr. long (540 sp-52)

33 KV XLPE Cable 3x300 sq mm

11 KV XLPE Cable 3x185 sq mm

11 KV Cable Jointing Kit Outdoor 3x185 sqmm

11 KV Cable Jointing Kit Indoor 3x185 sqmm

11 KV Cable Jointing Kit Staight Through 3x185 sqmm

33 KV Cable Jointing Kit Outdoor 3x300 sqmm

33 KV Cable Jointing Kit Staight Through 3x300 sqmm

Single Core XLPE Insulated Aluminium Cable 300 sqmm for Jumpring

LT XLPE Cable Alluminum 3.5x400 sqmm

LT XLPE Cable Alluminum 3.5x150 sqmm

LT XLPE Cable Al. 3.5x240 sqmm

L.T. Staight Through 3.5x400 sqmm

L.T. Staight Through 3.5x150 sqmm

LT XLPE Cable Jointing kit Outdoor

ACSR Weasel Conductor

AB Cable 3x50+1x35+1x16 sqmm

Three Phase D Box

Transformer 630 KVA

Transformer 250 KVA

Other Line material i.e. cross arm / conductor / pin insulator / stay / earthing/cable Box etc. except A.B Cable.

Dragging of ST Pole as per RESPO Norms.

Fabrication and Erection of Double Pole Support on ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Erection of Double Pole Support on ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Etection and Commossing of Three Phase D- Box with Nut and Bolt

Grouting and Binding of 11 KV Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles by Ms Earthing rod of 20x2500 mm and 6 swg earthing wire etc.as per RESPO Norms

Chemical Pipe for Earthing for B Pannel (all the material will be supplied by the contractor.)

Chemical Earthing (all the material will be supplied by the contractor.)

Earthing for C Pannel (all the material will be supplied by the contractor.)

Installation & Cable termination of B Type Pannel

Installation & Cable termination of C Type Pannel

Stringing, Sagging, binding and jumpering of ACSR Weasel as per RESSPO Norms

Stringing, Sagging, binding and jumpering of AB Cable Size (3x50+1x35+1x16) as per RESSPO Norms

Laying of LT XLPE Cable Alluminum 3.5x400 sqmm as per RESSPO Norms.

Laying of LT XLPE Cable Alluminum 3.5x150 sqmm as per RESSPO Norms.

Mounting of 630 KVA Transformer as per RESSPO Norms.

Mounting of 250 KVA Transformer as per RESSPO Norms.

Distributon feeder pillar type-B TP& N, 3 Phase 415 V, 250 Amps incoming rating type suitable for outdoor installation, in acoordance with technical specification incomer-1 set of 250A TP MCCB with spreader & Extended handle outgoing-6 Set of 125 Amp. TP MCCB. The Cubical should be weather proof, duct proof, Vermin proof and enclouser protection shall be IP-55 as per IS 2147-1962 and IS:8623. The Panels/switches boards shall be fabricated qut of 14 swg CRCA sheet steel and provided with 16 swg hinged doors including suitable foundation.

Commissioning of Lockable3 Phase 415 V, Distribution Service piller (Type -C) for LT 125 MCCB incoming 4 nos 64 Amp TP MCCB outgoing 12 No 25 amp SP MCB outgoing raiting feeder type distribution Service Piller suitable for outdoor Installation . . The Cubical should be weather proof, duct proof, Vermin proof and enclouser protection shall be IP-55 as per IS 2147-1962 and IS:8623. The Panels/switches boards shall be fabricated qut of 14 swg CRCA sheet steel and provided with 16 swg hinged doors including suitable foundation.

Laying of HDPE Pipe PE-80, PN-6, DN-200 mm dia for laying of 33 KV 3x300 sqmm XLPE Cable with HDD (trenchless) Method including cable

Laying of HDPE Pipe with Cable 3*185 sqmm

Cable Hosting

Laying of HDPE Pipe 140 MM with Cable

Stringing, Sagging, Binding and jumpering of ACSR Conductor as per RESSPO Norms

Laying of 11 KV XLPE Cable 3x185 sqmm underground D/C by HDD (HORIZONTAL DRILL DIRECTION) Method by HDD Machine Complete in all Respect as per norms. (All the material will be supplied by the contractor .

Laying of L.T. XLPE Cable 3.5x240 sqmm in Air & loop

Laying of HDPE Pipe witnL.T. XLPE Cable 3.5x240 sqmm (All the material will be supplied by the contractor ).

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x185 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 33 KV XLPE cable 3x300 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 33 KV XLPE cable 3x300 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for L.T. XLPE cable 3.5x240 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Construction of Plinth of Transformer Size 2x2x2.5 Mtr including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Installation of L.T. Staight Through 3.5x400 sqmm

Installation of L.T. Staight Through 3.5x150 sqmm

Cutting of Tree Branches way of line

Dismantling Charge & road breaking

Ex. Line Dismantling & Site to Store

Rect. Back old abd Used ST Pole

Rect. Back single phase AB Cable

Rect. Back ACSR Weasel Conductor old and used