Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.5 LAccepted-AOC AT SAWANG COLLIERY GOMIA BOKARO JHARKHAND 829116 | GOMIA | BOKARO | JHARKHAND | 829116 | L1 | Accepted-AOC AOC | |
| 2 | Rejected-Technical AT KATHARA PO KATHARA DIST BOKARO JHARKHAND | KATHARA | BOKARO | JHARKHAND | - | Rejected-Technical Rejected as not L1 | |
| 3 | Rejected-Technical 157 PUCCA HOUSE BYPASS ROAD DISTRICT GODDA JHARKHAND 814133 | GODDA | GODDA | JHARKHAND | 814133 | - | Rejected-Technical Rejected as not L1 |
Tender Value
₹4.5 L
EMD Value
₹5,600
Closing Date
9 Jul 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Project Engineer (EnM), Kathara Colliery
Project Engineer (EnM), Office of the PO, Kathara Colliery
Supply and installation of GOAB switch with fuse link for isolation of circuit required for Kathara Basti from 11KV main line passing Jarangdih 11KV OH line under Kathara Colliery
2024_CCL_311428_1
KTC/PE (EnM)/E-Tender/24-25/62
Open Tender
Electrical and Maintenance Works
Item Rate
10 days
Office of the Project Officer, PE (EnM), Kathara C
as per NIT
5 documents required · 5 mandatory
₹5,600
23 Aug 2024
27 Jun 2024
10 Jul 2024
28 Jun 2024
9 Jul 2024
28 Jun 2024
28 Jun 2024 - 5 Jul 2024
Amount
Erection of metallic / steel tubular of steel rail pole of length exceeding 10mtrs. but not exceeding 13 mtrs. in cement concrete 1:3:6 (1Cement : 3Sand :6 Graded stone aggregate 40mm nominal size) foundation including excavation and refilling is required.
Supplying and erection of stay set complete (galvanized) with 19/20 mm dia X 1.8M long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20mm X 60 cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc as required.
Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.
Supplying and erection of 11 KV disc insulator for 11KV over head lines with galvanized insulator fittings, ball and socket type and complete with galvanized strain clamps, bolts, nuts, washers etc.
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11KV grade as required :-
Cable 120 Sq.mm to 150 Sq.mm
Erection of ACSR conductor DOG of 7/3.35mm to 7/4.00 diameter and above including binding etc as required. 450 Mtrs X 0.394 Kg / Mtrs. = 177.3 Kg. + 10 % sagging + 2% binding & jumphering = 198.57 Kg.
Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per meter) double pole cross arm for 3 wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.
Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (RMS) with a nominal discharge current rating of 5 KA and complete with galvanized clamping arrangement, G.I. bolts, nuts, washers etc. as required.
Supplying and laying 25 mm X 5mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm).
Supply and laying of G.I Wire 5 SWG including binding etc. for cradling weight of G.I wire
One coat red oxide paint and aluminum paint for painting of pole with bracket.
Providing of GOAB Switch 800Amps (heavy duty) horizontal type
Providing of Horn Gap with copper fuse.
Labour Charge
Supplying and erection of a set of cross bracing FRL same work for 11 KV/440 Volts over head line double pole structure having four members fabricated out of 50 mm X 50 mm X 6 mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height, complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1KV grade as required. a) 3 ½ x 70 sq.mm
Supply and fixing of double interposing gland bush : 70 sqmm to 150sqmm
Total impact of GST for the purpose of CTC
M/S ATRACON ELECTRICALS
M/S VISHAL ENTERPRISES
techsummary_322733.pdf
PDF • 2.80 MB
finsummary_322733.pdf
PDF • 2.80 MB
TCR62.pdf
PDF • 2.13 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .