Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.5 LAccepted-AOC | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹45.6 L+₹3.1 L (7.39%)Rejected-AOC | L2 | Rejected-AOC Highest tenderer | |
| 3 | L3₹48.0 L+₹5.5 L (13.0%)Rejected-AOC NO 1 1 ANNA STREET ETHIRAJ NAGAR WEST MAMBALAM METTUPALAYAM CHENNAI 600 033 | CHENNAI | TAMIL NADU | 600033 | L3 | Rejected-AOC Highest tenderer |
Tender Value
₹43.4 L
EMD Value
₹36,000
Closing Date
30 Jun 2025, 11:00 amClosed
Superintending Engineer, Chennai circle-II
Tamilnadu Housing Board, 485, MTB Building, Anna Salai, Nandanam, Chennai - 35.
Providing Rain water drain and certain repair works in 102 HIG Flats in Block No 85 of Mylapore Village Nandanam at Chennai District
2025_TNHB_566730_1
CC-II/11/2025-26
Open Tender
Civil Works
Item Rate
30 days
Nandanam
No.
Please refer tender documents.
9 documents required · 9 mandatory
₹0
₹36,000
23 Jul 2025
12 Jun 2025
30 Jun 2025
12 Jun 2025
30 Jun 2025
12 Jun 2025
Amount
Earth work excavation for drain in sand silt or other loose soil wet sand or silt, light black cotton, sandy loam soil and to the required depth as may be directed except in hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary, depositing the surplus earth in places shown clearing and levelling the site with an initial lead of 10 metre and lifts as specified herunder etc., all complete in all respects complying with relevant standard specification (excluding refilling) 0 to 2 m depth.
Brick work for partition wall 115mm thick in CM 1:3 using class II ground moulded bricks of size 9"x 4 1/2"x 3" for superstructure in basement including labour etc all complete in all respect complying with relevent standard specifications and as directed dy the deparmental officers (The brand and quality of Brick should be got approved from the EE before use)
Supply & delivery of natural Pebbles using size 20 mm to 70 mm filter media for Filter bed operation & sedimentary bore well of spherical in shape and allow even distribution in support bed with good flow. The media should be double washed, screened, kiln dried and classified into various sizes to meet specification including all incidental charges, conveyance, loading & unloading etc all complete in all respect complying with relevent standard specifications and as directed dy the deparmental officers
Cement Concrete 1:2:4 (One of cement, two of sand and four of hard broken stone jelly) for all reinforced cement concrete works, namely plinth beams, columns, tie beams, column footings, slab, etc. using 20mm gauge hard broken stone jelly excluding the cost of reinforcement grills, fabrication charges, shuttering and centering but including vibrating, laying, curing, with relevant standard specifications & as directed by the departmental officers.
Supplying, fabricating and placing in position of Mild Steel/ Ribbed Tor steel for reinforcement for all RCC works in all floors including the cost of binding wire, bending, tying and applying one coat of Cement Slurry etc., complete in all respects and as directed by the departmental officers.
Plastering with CM 1:4 (one of cement and four of sand) 12mm thick finished with neat cement for drains and culvert flooring including providing band cornice, curing, etc., complete in all respects and complying with standard specifications.
White washing of two coats using shell lime including cost of materials and labours etc., etc., complying with relevant standard specifications & as directed by the departmental officers.
Supplying and fixing of FRD doors in the required area with the following specifications including cost of fittings , labour for fixing etc, all complete complying with relevant standard specifications. and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use) a. Door Frame 1.6mm: Galvanized 120 GSM branded make JSW b. Door Leaf 1mm: Galvanized 120 GSM branded make JSW c. Shutter Thickness: 46mm d. Honeycomb: In-fill e. Glue Macroplast UR-7221 f. Door Hinges: 4” x 3” x 3mm, Double Ball: Make Assa Abloy Yale Ball bearing Butt Hinges Grade SS 304 - Finish SS g. Door Closer with Standard Arm Finish: Silver h. Lock Set: Dead Lock with both side key i. Door Orientation: To be confirmed by client j. Mounting of door: Brick wall mounted k. Powder Coating: Powder coated in standard RAL paint colour of PO Red (60 to 90) Microns l. Single Point Panic Bar (2 Horizontal): Make Assa Abloy Yale or Equivalent m. Dead Lock with both side key: Make Assa Abloy Yale or Equivalent n. Vision Panel 200 x 300mm 2 Hrs. Fire Glass Schott Pyran with Frame o. Rated Glass Schott Pyran with Frame p. Anchor Bolt with Endcaps
Supply & Fixing of Mild steel grills of approved quality including bending, welding, filing fixing in position with necessary screws, plugs, one coat of red oxide primier of approved quality, labour charges for fixing etc all complete complying with relevant standard specifications and as directed by the departmental officers (The design of grills should be got approved from the EE before use)
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing,conveyance, electrical charges, etc. complete as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use)
Supply and fixing of good quality of mirror in the required place with including cost of fixing charges and etc all complete complying with relevant standard specifications. and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use)
Providing cuddappa slabs of 20 mm thickness for cupboards, wardrobes .shelves,of well polished on both sides smoothly including fixing with CM 1:3 (one of cement three of sand)12mm thick including cutting to the required size laying fixing in position and jointing with black oxide and finishing neatly etc. as directed by the dept. officers.
Supply and fixing of good quality of bottle trap in the required place with including cost of fixing charges and etc all complete complying with relevant standard specifications. and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use)
Supply and fixing of good quality of Brass Chromium Plated Soap Tray of size 150mm x 100mm in the required place with including cost of fixing charges and etcall complete complying with relevant standard specifications. and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use)
Supply and fixing of good quality of Brass Chromium Plated Towel Rail 60cm long and 20mm dia with Brackets in the required place with including cost of fixing charges and etcall complete complying with relevant standard specifications. and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use)
Labour charge for removing the Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Cuddapah Slabs etc all complete as directed by the departmental officers
Supplying and fixing in position of colour glazed wall tiles of any size 6mm thickness laid in cement mortar 1:2( One of cement and two of sand) 10mm thick for wall facing / dadoing ,skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers. Note:( The colour make and quality shall be approved from the E.E before use ) Note: ( only one particulars size of ceramic wall tiles to be used for one building)
Supplying and fixing in position of colour Antiskid floor tiles of any size of approved special quality of 6mm thickness laid in cement mortar 1:3( One of cement and three of sand) 20mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers.Note:( The colour and quality shall be approved from the E.E before use only one particular size of ceramic wall tiles to be used for one building)
Sub Total
V SIVAKUMAR (BID ID -1385434)
SRK CONSTRUCTIONS (BID ID -1370724)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .