PROVN OF RP SHED FOR SECURITY PURPOSE AT 3 ASC SECURITY GATE AT AFS UNDER GE BR CHAKERI KANPUR

Amount

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

M&L PCC 1:4:8 type-D2 (40mm graded aggregate) as in foundations, filling and mass concrete.sub base as in floors. complete all as specified and directed..

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F mild steel work as in roof trusses (framed) in tubular/rectangular/square section as in purlin/rafter, fastening and heavy brackets framing complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F for mild steel rag or lewis bolts, screwed one end with hegagonal or square nuts and washers , the other end enlarged and jagged or lewised, 25 mm dia and length of bolt exceeding 30 cm long complete all as specified and directed.

M & L preparation of new steel surfaces any description, not otherwise descrived, over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M&L for providing 50 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone agregate) as in sub base complete all as specified and directed.

M & L 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M & L PCC 1:2:4 type B1 (20mm graded aggregates) around interlocking tiles including necessary form works complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Supply and fixing of letter made out of stainless chromium plated of height as directed (not exceeding 45 cm) and width and thickness not exceeding 45 mm,drilling in existing brick/concrete wall and inserting the existing nuts/ bolts in to hole and using adhesive to fixed the nuts/ bolts, polishing/ shining of old letters and making good of old surfaces up to 12 mtr height complete all as specified and directed. Note : All necessary arrangments should be done by contractor for fixing of letters at height .

Demolition of brick work / stone boulder masonary built in cement mortar or cement lime mortar of any description and in any position complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss complete all as specified and directed.

S & F for framed doors or gates of mild steel angles or other sections with gusset plates, rails, braces etc., complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hangings door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixingof Fe-410W(Gde-E-250) quality 'A' complete all as specified and directed.

M&L for brick work with fly ash brick straight or curved on plan exc 6.0 Mtr mean radius built in CM (1:4) complete all as specified directed

M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and fair complete all as specified and directed.

M & L Preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

S&F aluminium composit panel over all 4 mm thick panel, aluminium sheet thickness 0.50 mm minimum width 1.22 mm , minimum length 2.44 mm weight @ 5.50 Kg/Sqm external faces coil coated with PVDF and internal face coil coated polyster for cladding wall, coloumn , beams and ceiling etc fixed with and including to frame work as per manufacturers's instructions complete all as specified and directed.

S&F mild steel plates (plain or chequered), channels, square cut or notched, framing holes as in gusset plates etc confirming to Fe- 290, Gde-165 complete all as specified and directed.

M & L for Point wiring with PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including non metallic white/ivory rigid PVC conduit ISI marked medium grade not less than 19 mm dia with all conduit accessories/fittings in concealed wiring system by cutting of wall and making good disturbed surface of wall including matching /finishing the surface with existing (cutting except on ceiling for fan point only, on ceiling PVC conduit on surface will be used) & 1.5 sqmm green PVC insulated unsheathed FRLS copper conductor as a earth wire connected to earth dolly by providing lugs including sunken MS boxes of not less than 1.5 mm for mounting switches, sockets, fan regulators etc for one light/fan point controlled by one switch complete all as specified and as directed.

All as per item No 27.00 above one 5 Amps socket out let point on independent board controlled by one switch complete all as specified and directed.

All as per item No 27.00 above one 5 Amps socket out let point controlled by one switch on same board with other switches complete all as specified and directed.

All as per item No 27.00 above but wiring with 2.5 sq mm single core copper conductor for one socket out let 15/16 amps point on the independent boardcomplete all as specified and directed. Make of cable: Polycab/Havell's/Finolex and Make of PVC conduit: Plaza/Harsh/Kalinga Premium/AKG.

Supply and fixing switch piano flush button single pole one way 5 amps, 230 Volts complete all as specified and as directed.

Supply and fixing switch piano flush button single pole one way 15 amps, 230 Volts complete all as specified and as directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, 230 Volts complete all as specified and as directed.

Supply and fixing socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite 63.5mm dia three terminal, fixied complete all as specified and as directed.

Supply and fixing double door SPN DBs 12 way of powder coated DB's suitable for MCB's fitted with bus bar, Neutral link, Earth bar and Din rall as per existing finishing complete all as specified and as directed .

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection complete all as specified and directed by Engr-In-Charge.

Supply and fixing MCB SPN 5 to 32 amps 10 KA, C-series including connection complete all as specified and directed by Engr-In-Charge.

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with FRLS multistranded copper conductor, including PVC insulated unsheathed 4 Sqmm FRLS cable multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly drawn in new/existing MS/PVC conduit complete complete all as specified and directed. Note:- (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC conduit if required shall be measured and paid separately.

M&L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees, bends. Junction boxes, elbows saddles,pipe hooks,couples and lock outs etc of size not less than 20 mm external dia, fixed in convealed position on wall and on surface on roof/iron shed complete and making good disturbed surfaces match to existing complete all as specified and directed. Note:- Cost of cutting chase and making good disturbed surface & matching with existing are deemed to be included in quoted rate.

S&F in repair recess mounting LED panel 600X600 mm fittings made of CRCA powder coated finish LED used shall be SMD type and fixture should have minimum efficiency at system level ( Not chip level) 100lm/watt, life of fixture 50000 burning hours @ L70% Lumen maintinence CCT upto 6500, CRI More THEN 80, pf 0.95 and an operatng voltage 140 Volt to 270 Volt internal surge protection 2.5 KV AS IS 10322 and IEC 60598 systme wattage 31-36 watt complete electronic drivers with all internal electric connections complete all as specified and directed . Make- Philips Cat No. RC 380B LED 36S-6500 G4 L60 W60 PSU OD or equivalent in Wipro/ GE.

S & F in repair energy saving enviromental friendly long life LED 120 Watt, 5700 K, exclusive innovative die cast aluminium IP-65 flood light with high power LEDs as light source, suitable for highlighting architecture façade highmast and general purpose lighting including electrical connection complete all as specified and directed. Make : Philips Cat No. BVP192LED110CW HO NB FG GR PSU or quivalent in Wipro/ GE.

Supply ad fixing LED post top , 35 watt made in pure polyster UV resistant powder coated die-cast aluminium with PMMA clear diffuser for uniform illumination and prewired with all accessories complete incuding all electrical connections complete all as specified and directed.Make : Wipro Cat No LP07-431-xxx-57-CL or equivalent Philips/Havells

Supply and fixing LED track light , track mounted LED COB luminaire high efficiency housing made of extruded aluminium and prewired with all accessories complete incuding all electrical connections complete all as specified and directed. Make : Wipro Cat No LD57-251-024-40-xx or equivalent Philips/GE.

M/S SDS Construction Co.

Preetpowercontrol