Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 LAccepted-AOC BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | L1 | Accepted-AOC Lowest and reasonable bid | |
| 2 | L2₹22.4 L+₹1.2 L (5.67%)Rejected-Finance SHOP NO 4 GULATI MARKET KRISHNA NAGAR NEHRU GARDEN ROAD JALANDHAR PUNJAB 144001 | JALANDHAR | PUNJAB | 144001 | L2 | Rejected-Finance Other than the lowest bid |
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
2 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (West) Jalandhar cantt
Kabir Road Jalandhar Cantt
Petty repair, day to day complaint in area A3 of AGE B/R-I under (West) JRC
2023_MES_606885_1
GE/JAL(W)-43/2023-24
Open Tender
Civil Works
Item Rate
270 days
Jalandhar Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (West)
₹36,000
Yes
26 Aug 2023
30 Jun 2023
9 Aug 2023
30 Jun 2023
2 Aug 2023
21 Jul 2023
Amount
Taking down and refixing of shutter of any description area exceeding 1 Sqm but n exc 2 sqm each, after easing, tightening pins etc to ensure smooth operation of shutter complete all as specified.
Securing or easing and adjustment without taking down the shutter of any description exc 1 sqm and n exc 2 sqm each complete all as spd and directed
S&F in repair Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width 1.18mm and fixed with tinned tacks of galvanised wire stapple etc wooden/fillets complete all as specified.
S&F in repair replacement door closer hydraulically regulated, designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as spd and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified inclding Hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads.
M&L second class hard wood plain fillets square or rectangular in section, clean sawn, planed on both sides, sectional area exc 3 Sqcm and n.exc 6 Sqcm, fixed with nails including two coats of synthetic enamel paint over a coat of primer after preparation of surfaces complete all as specified.
S&F in replacement MS tower bolt 150mm stove enamelled black with bright bolt and fixed complete all as specified.
S&F in replacement MS tower bolt 200mm stove enamelled black with bright bolt and fixed complete all as specified.
S&Fin repair Butt hinges, medium weight cold rolled 100 mm size ISI marked.
S&F in replacement MS sliding door bolts of size 300 mm plate type stove enamelled black with bright bolt not less than 12mm dia with and including 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified.
S&F in replacement MS 100 mm hasp and staple including bolt to hinge plate and fixed with screw complete all as specified.
S&F in replacement 300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete (Helical door spring) welded to steel chowkats complete all as specified.
S&F in replacement 125mm MS pressed handle oval type stove enamelled black complete all as specified.
Supply and fixing 40mm dia, cupboard knobs brass polished fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.
Supply and fixing in repair stainless steel plate rack of superior quality of size 36" x 24" weight not less than 8 kg complete all as specified and as directed.
M&L for mild steel pipe 25 mm dia curtain rod with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved complete all as specified.
S&F in repair mild steel chromium plated peg set of 6 nos, 45 cm long approx complete all as specified and directed.
Taking up or down steel tubing incl connection, 15mm bore including cleaning of serviceable pipe for re-fixing complete all as specified. Note: Cost of cutting, chasing in walls floors etc wherever required and making good shall be included in the unit rate quoated by the tenderer.
All as per ser item No 18 here-in-before but 20mm bore.
S&F mild steel tubes, 15 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors complete all as specified.
All as per ser item No 20 here-in-before but except pipe.
S&F mild steel tubes, 20 mm bore, medium grade galvanized with all fittings and fixed to walls, ceiling or laid under floors complete all as specified.
All as per ser item No 22 here-in-before but except pipe.
S&F in replacement galvanized iron socket for 15mm bore pipe replaced independly as approved by Engr-in-charge complete all as specified and directed.
S&F in replacement galvanized iron socket for 20mm bore pipe replaced independly as approved by Engr-in-charge complete all as specified and directed.
S&F in replacement galvanized iron nipple 15mm bore, 75mm long replaced independently as approved by Engr-in-charge complete all as specified and directed.
S&F in replacement galvanized iron nipple 20mm bore, 75 mm long replaced independently as approved by Engr-in-charge complete all as specified and directed.
S&F in replacement galvanized iron tank nipple 20 mm bore, 100mm long replaced independly complete all as specified and directed.
S&F in replacement galvanized iron union 15mm bore complete all as specified and directed.
S&F in replacement galvanized iron union 20mm bore complete all as specified and directed.
S&F in replacement galvanized iron elbow 15mm bore complete all as specified and directed.
S&F in replacement galvanized iron elbow 20mm bore complete all as specified and directed.
S&F in replacement galvanized iron Tee 15mm bore complete all as specified and directed.
S&F in replacement galvanized iron Tee 20mm bore complete all as specified and directed.
S&F in replacement 20mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified. (Minimum weight - 210 gms)
S&F in replacement 15mm bore ball valve of PTMT, high pressure with epoxy coated aluminium rod & high density plastic ball complete all as specified. (Minimum weight - 210 gms)
S&F in replacement 10 ltrs PVC (White) valve less syphonic action type, flushing cistern, low level with inlet ball valve float, handle, aluminium brackets for bottom support, fixing in position complete all as specified.
S&F in replacement flush handle for PVC valveless syphonic action type flushing cistern all as specified.
Petty repairs to low level flushing cistern adjustement of syphon, replacement of washer, adjustement of handle, float valve as requried for making the cistern functional complete as directed.
Removal of air lock, blocking in water pipes/bib taps/stop valve including cleaning pipes as requried and as directed to ensure proper flow of water complete all as specified.
S&F in replacement 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls or laid in trenches/ under floor complete all as specified.
S&F in replacement PVC (SWR) bend/shoe of any radius for 110mm bore pipes complete all as specified.
S&F cast iron pipes with single socketed in any length with rubber ring joints fixed on brick walls 100 mm dia including dismenteling of existing pipes including all fittings complete all as specified and directed.
S&F cast iron bends in radius 100 mm bore with aram 380 to 450 mm
S&F in replacement 15mm bore bib tap cast copper cromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule complete all as specified.
S&F in replacement 15mm Brass tap with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule complete all as specified.
S&F in repair15mm bore Pillar tap cast copper cromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or bore brass ferrule complete all as specified.
S&F in repairs chromium plated fancy type stop vlave /angle valves with cup cast copper alloy screwed down high pressure, screwed both ends for iron pipes or for unions for 15 mm bore pipe complete all as specified and directed.
S&F in repairs plastic water closet white seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed
S&F in replacement 15 mm bore bib taps of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight - 90 gms)
S&F in replacement rubber washer for 15mm bore bib tap/ Pillar tap/Stop cock etc all as specified as directed by Engr-In-Charge.
S&F in repair 15 mm bore stop cock PTMT of any colour screwed for iron pipe and fixed (Min weight-90gm) complete all as specified.
S&F in replacement flush pipe of polythene of low or high density PVC 32mm dia for low level cistern incl all joints complete all as specified.
S&F in repair flushing systen kit (Complete kit) for low level flushing systen complete all as specified.
S&F in replacement brass spindle, any length, for bib tap, stop cock 15mm dia complete all as specified.
S&F in replacement vitreous china wash down water closet pan ORISSA pattern size 580x 440mm white with integrated foot rest, making connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.
S&F in repairs Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed
S&F in replacement vitreous china wash hand basin, white flat back, size 550mm x 400mm including mild steel brackets, including cutting for and pinning in ends of bracket complete all as specified.
S&F in replacement PTMT waste coupling40 mm (half or full threaded ), (minimum weight 32mm, 45 gms) complete all as specified.
All as per ser item No 59 here-in-before but 100 mm for steel sink complete all as specified.
Petty repair to PVC door shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats complete all as specified.
S&F in replacement towel rail 600mm long PTMT and including chromium plated brass screws and wooden/plastic cleats (Min wt 190 gm) complete all as specified.
S&F in replacement plain aluminium sheeting , alloy 31000 H4, in ridge, hips, 0.56mm thick, fixed with steel screws to door shutters or wooden frame shutters complete all as specified.
Petty repair to existing steel door,window by welding hinges or removing the steel window shutters from the frame and re-fixing after making serviceable all directed.
S&F PVC cover of water tank cap 500/1000 ltrs complete all as spd.
S&F in replacement CP grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified.
S&F in replacement CP grating 100 mm dia with centre hole circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified.
S&F in replacement Swivel shower of PTMT of any colour for fixing with 15mm pipe (Min weightt 40 gm) and dia 100 mm complete all as specified.
S&F in repair PVC waste pipe 32mm bore, length 800 mm to 1000 mm complete all as specified.
S&F in repair PVC waste pipe 40mm bore, for sink,urinial etc complete all as specified.
M&L flush pointing in cement mortar 1:3 on brick tiles laid flat including raking out joints, hacking for key complete all as specified.
Cleaning of over head tank of any description and capacity, descaling, washing with detergent powder, removing vegetation around the over head tank/plat form including cleaning of incoming and out going GI tubing complete all as specified and directed.
S&F PVC connection 450mm long with brass nuts suitable for 15mm bore pipe complete all as specified.
Material & labour for plastering in patches not exceeding 3 sqm in each patch, 15 mm thick in cement sand mortar 1:4, finished even and smooth (without using extra cement) including taking down plastering and two coats of exixting surface finishes i.e cement base paint/exterior emulsion paint complete all as specified and as directed.
Taking down cement plaster on brick or stone walls including raking out joints hacking for key scrubbing down with water all as specified.
M&L for 15 mm thick cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement all as specified.
M&L for 15 mm thick cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement all as specified.
M&L for 5 mm thick in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling, chajjas, roof projection etc complete all as specified.
M&L for three coats of white wash on newly plastered surfaces of wall including preparation of wall surfaces all as specified.
M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of wall surfaces all as specified.
M&L for preparation of newly plastered or unplastered surfaces of walls by applying two coats of oil bound distemper over chalk whiting, on plastered surfaces complete all as specified and directed.
M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L for preparation of newly plastered surface of walls and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed.
Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (below or above the ground level) all as specified.
M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishing the surface even and smooth withot using extra cement all as specified.
Petty repairs to leaking PVC/Brass tap/stop cock with replacement of washer jumper valve any type and size complete all as spd.
S&F in replacement CP Jet for EWC including flexible pipe complete all as specified.
S&F new rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), ISI marked, hoisted & fixed in position , capacity 500 litres, including 20mm bore PTMT ball valve high pressure with epoxy coated aluminum rod and high density polythene ball including dismantling of unserviceable tank and removing from site complete all as specified and directed.
S&F new rotational moulded polyethylene water storage tank (Cylindrical vertical with closed top), ISI marked, hoisted & fixed in position , capacity 1000 litres, including 20mm bore PTMT ball valve high pressure with epoxy coated aluminum rod and high density polythene ball including dismantling of unserviceable tank and removing from site complete all as specified and directed.
S&F in repair for CP bib cock long body 15mm fancy type complete all as spd.
S&F in replacement hand shower/ health fauset (ABS Chrome Plated) with 8mm dia, 1 metre long flaxible tube & wall hook complete all as specified.
S&F in replacement stainless steel soap dish fixed with brass screws and rawl plugs complete all as specified.
Petty repairs to aluminium door shutters, by making minor adjustment floor spring etc easing shutter including taking down of shutter and refixing in same position after providing new rubber beading around the glass, screws etc. complete all as specified.
S&F mild steel 2 levers mortice lock, vertical type, size 100 mm complete all as Specified .
S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass , other parts made of mild steel heavy duty and fixed complete all as spd.
Supply and fixing double legged floor door stopper aluminium alloy body and tongue, with hard drawn steel spring overall length of cover plate 140mm complete all as spd
Petty repairs to cup board (Kitchen) including easening of cup board shutters including taking down and refixing in position of shutters drawers tightening of piano type hinges fixing handle etc with drawers adjusting of ball catches etc, (One unit shall comprises one cup board irrespective in numbers of shutters and drawers) complete all as specified.
M & L for block board 18/19mm thick grade 2 quality, interior grade, decorative face veneer on one face in cup board or drawers complete all as specified.
Cleaning of floor trap and applying of cement slurry around the floor trap with sealant compound for arresting the seepage complete all as specified and as directed by Engr-in-Charge.
Supply and fixing 40mm magic eye of brass body, standard size, fixed to door shutter with brass screws complete all as specified and as directed.
Material & labour for renewing of ceramic/ glazed tiles 6 to 8 mm thick in patches with new tiles of same existing patterns and size, area not exc 5 Sqm incl removing and cleaning old tiles preparing beds by CM 1:6 and or setting jointing and pointing tiles complete all as specified ad as directed.
FRIENDS ENGINEERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .