Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-AOC VIKASH NAGAR GAUSHALA RAMGARH CANTT 829122 RAMGARH JHARKHAND | RAMGARH | JHARKHAND | 829122 | L1 | Accepted-AOC Bid is lowest and reasonable | |
| 2 | L2₹33.0 L+₹81,635.02 (2.54%)Rejected-AOC | L2 | Rejected-AOC Bid is not lowest and reasonable | |
| 3 | L3₹34.6 L+₹2.4 L (7.47%)Rejected-AOC | L3 | Rejected-AOC Bid is not lowest and reasonable | |
| 4 | L4₹35.4 L+₹3.2 L (10.1%)Rejected-AOC | L4 | Rejected-AOC Bid is not lowest and reasonable | |
| 5 | L5₹36.0 L+₹3.8 L (11.7%)Rejected-AOC | L5 | Rejected-AOC Bid is not lowest and reasonable |
Tender Value
₹35.0 L
EMD Value
₹69,900
Closing Date
16 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE RAMGARH
GE RAMGARH CANTT
SPL REPAIR TO BLDG NO P308A P308B OR MD ACN AND P308C JCO MD ACCN AT HAZARIBAGH UNDER GE RAMGARH CANTT
2022_MES_564162_3
8300/3140/E8
Open Tender
Civil Works
Item Rate
270 days
GE RAMGARH
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE RAMGARH
₹69,900
Yes
29 Mar 2023
9 Feb 2023
18 Feb 2023
9 Feb 2023
16 Feb 2023
10 Feb 2023
Amount
Demolition of plain cement concrete in ground floors, terrazo tiles floor & paving n.exc 15cm thickness (below or above ground level) and removal of rubbish outside MoD land, complete all as directed by Engr-in-Charge.
Supply only liquid water proofing compound (ISI marked )complete all as specified and directed.
M& L for applying evenly a tack coat of industrial hot blown bituminen grade 85/25 @ 1.2 Kg/Sqm over primer including cleaning of surface complete all as specified and directed.
S & F 50 mm bore GI tube, light grade as in spout pipe, complete with all fittings laid as in floor etc., complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.
M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.
M & L glazed ceramic coloured tiles of size 375 mm x 250 mm x7mm/450 mm x 300 mm x7 mm thick ,as in dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles including 10 mm thick rendering in cement plaster in CM (1:3), complete all as specified and directed.
M&L for Vitrified dark shade coloured ceramic floor tiles 10 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles over & including 15 mm thick screed bed in cement mortar (1:6) etc complete all as specified & directed.
Taking down chowkhats or frames with shutter (without taking off shutter from the frames) of any description not exceeding 1.5 Sqm each, complete all as specified and directed by Engr-In-Charge .
Taking down chowkhats or frames with shutter (without taking off shutter from the frames) of any description exceeding 1.5 Sqm but not exceeding 4.0 Sqm each, complete all as specified and directed by Engr-In-Charge .
S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engr-In-Charge .
S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing including 3 Nos stainless steel butt hinges 100 mm long for each door, complete all as specified and as directed.
S & F 1.25 mm thick, pressed steel frames of size 125 X 60 mm for doors or windows with one or more rebates including necessary fixing lugs, hinges lock strike plate,etc complete as specified and directed.
S &F 35 mm thick Plain framed, panelled shutter (three panel) with lock rail and panel of 12mm thick plywood commercial on both faces. The size of rail and style as per IS: 1003(Part - 1) complete as specified and directed.
S & F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with out sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. fitted to chowkhats for doors etc., complete size of the members of shutter is as specified in clause No. 8.20 (a) of MES schedule 2009, part – I (Specifications) complete all as specified and directed.
S &F Powder coated aluminium work for doors, windows, ventilators shutters(fixed/sliding track two or three track) and partitions frames with extruded built up standard sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions with sealent with wall, i.e. at top, bottom and sides including cleat angle, C.P. brass/ stainless steel screws, all complete all as specified and directed.
S&F powder coated aluminium sliding door shutters (minimum thickness of powder coating 50 micron) , aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber packing anodised aluminium, snap beading screws, powder coated aluminium fittings such as peg stays 150mm long (1No.),100mm long hinges type B-21 (2Nos), suitable handle(02 Nos.) in each door top rail guide rail etc. complete all as specified and directed.
M & L PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) for bed block, fillings for hold fasts,frames etc., complete all as specified and as directed.
S & F 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed ..
S & F Aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed, complete all as specified and as directed.
S & F Aluminium anodised handles 125 mm long of extruded section, complete all as specified and as directed.
S & F aluminium sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and directed by Engr-In-Charge .
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples, complete all as specified and directed by Engr-In-Charge.
S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples, complete all as specified and directed by Engr-In-Charge .
Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and directed by Engr-in-Charge .
M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane, complete all as specified and as directed by Engr-In-Charge .
M & L for 3mm thick frosted glass pin headed type and glazing with oil putty not exceeding 0.50 Sqm in each pane, complete all as specified and as directed by Engr-In-Charge.
S&F small fitings of 2nd class hard wood such as brackets of any type, latch and hinge block shape door, window stops and the like including all necessary labours articles not exceeding 200 cu.cm each complete all as specified and as directed by Engr-In-Charge.
S & F for mild steel ordinary rat tail rod pattern springs 200 mm including roller and roller plate complete all as specified and directed by Engineer -in-Charge.
S & F in repair Harrison rails, anodised aluminium alloy with bracket etc., complete all as specified and as directed by Engr-in-Charge.
Taking down cement plaster on brick wall or concrete surface etc.including raking out joints, hacking for key scrubbing down with water etc and removing of debris from site, complete all as directed.
Demolition of brick work or stone masonry of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed.
M&L for Brick work using old size bricks , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:4 etc complete all as specified & directed.
M&L for rendering 15 mm thick on fair face of brick masonry/concrete surface etc in CM (1:6) surface finished even & smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick on other than fair face brick masonry/concrete surface etc in CM (1:4) surface finished even & smooth without using extra cement with & including water proofing compound complete all as specified and directed. (Note:Water proofing compound shall be measured and paid seprerately under respective item of "BoQ")
M & L for rendering 5 mm thick in CM 1:4 on concrete surfaces as in ceiling finished even and fair complete all as specified and directed.
M&L for preparation of newly plastered surface and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.
M & L preparation of newly plastered surface of ceiling/fascia and applying three coats of white wash on the surface, complete all as specified and directed.
M & L for preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistant primer, complete all as specified and as directed.
M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 (using 20mm graded crushed stone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed. (65+20)
M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring, foundations,filling & mass concrete for fencing posts, foundation of pole ,struts & stay assembly etc complete all as specified and directed.
M&L for 50 mm thick plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in flooring/hard standing /ramp etc finish even & smooth without using extra cement including 10 mm wide & 50 mm deep joints at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed.
M & L for anti-fungal chequered cement concrete tiles 30 cmX 30 cm X 22mm to 25mm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 20mm thick cement screed bed in cement mortar (1:6) complete all as specified & directed.
M & L for plain cement concrete 1:5:10 type E-2( using 40 mm graded brick aggregate ) as in sunken portion, sub-base, etc., complete all as specified and as directed.
M & L for plain cement concrete 1:2:4, type B-1 (using 12.5 mm graded crushed stone aggregate) in levelling courses, coping, window cill etc., complete all as specified and directed.
Demolition of cement concrete reinforced as in chullah hoods, shelves, cover slab and platform, etc,complete all as directed by Engr-in-Charge
M&L reinforced cement concrete 1:2:4 ,type B-1 (using 20 mm graded crushed stone aggregate) as in kitchen platform, shelves , cover slab, etc. including necessary formwork complete all as specified and directed. Note : Reinforcement will be measured & paid seperately under respective item of BOQ.
M&L for mild steel TMT bars 08 mm dia and over grade Fe -500 , as in reinforcement ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.
M & L for 18 to 20 mm thick granite (of any type) work (tabled rubbed and polished) of any shade in cooking platform, steps, window, cills etc., over and including 15mm thick screed base in CM (1:4) laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab including rounding of slab and demolition of old slab where directed, complete all as specified and as directed.
S & F in repair1000 Ltr capacity rotational moulded polyethene water storage tanks in two layers, (cylinder vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I,, including PVC ball valve 25 mm dia with epoxy coated aluminium rod and high density ball (minium weight 210 gms), complete all as specified and as directed.
Disconnecting existing water tanks of capacity exc. 500 Lit but not exceeding 1000 Ltr, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required for reconnecting and re-fixing in position complete all as specified and as directed.
M&L for 15 mm bore GI water tubing medium grade, ISI marked, galvanised, with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors etc ,complete all as specifed & directied.
M&L for 20 mm bore GI water tubing medium grade, ISI marked, galvanised, with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors etc ,complete all as specifed & directied.
Refixing old GI water tubing medium grade, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors complete all as specifed & directied.
Refixing old GI water tubing medium grade, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors complete all as specifed & directied.
Taking up or down for 15 mm bore steel water tubing and connections including cleaning for refixing complete all as specifed & directied.
Taking up or down for 20 mm bore steel water tubing and connections including cleaning for refixing complete all as specifed & directied.
S&F in repair gun metal globe or gate valves(ISI MARK), with iron wheel head, screwed both ends for iron pipe 25 mm bore complete all as specified and directed.
S&F in repair gun metal globe or gate valves(ISI MARK), with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified and directed.
S & F in repair angle cock 15mm bore, chromium plated with long shank and cup cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule, complete all as specified and as directed.
S & F in repair 15 mm bore fancy type pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.
S & F in repair 15mm dia bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified and directed.
S & F in repair brass chromium plated shower rose 125 mm size fancy type with or without swivel joint fixed to iron pipe etc., complete all as specified and as directed.
S & F in repair vitreous China wash hand basin, flat back type, size 550X400mm including , 32 mm PVC waste pipe, chain & plug ,stopper, bracket ,cutting,pinnings in ends of brackets ,fixed on RCC slab and making good disurbed surfaces in CM (1:3), complete all as specified and directed.
S & F in repair for vitreous china wash down water closet, pedestal pan and trap, including connection to drain or outgoing pipe, and to flushing pipe, anti-syphonage pipe, etc., and including seat and cover for pedestal pan, complete all as specified and directed.
& F in repair for PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as specified and as directed.
& F in repair CP towel rail, 20mm dia, D- type, 60cm long, complete all as approved by Engr-in-charge.
S & F in repair flushing cistern low level, PVC 10 lit capacity syphonic action type, valveless with inlet ball valve, float valve and handle including bracket and 32mm flush pipe of polyethylene, complete all as specified and as directed.
S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 300 gms ) complete all as specified and directed.
M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of distemper oil emulsion (OBD) over a coat of primer and a layer of putty (not less than 1.5 mm thick )complete all as specified and directed.
M & L for preparation of old decorated surfaces of ceiling including brooming down or steel wire brushing, scrapping down smokes soot moulds, moss and efflorescent salts and treating oil and greasy spot & applying one coat of oil bound distemper, complete all as specified and as directed.
M & L for preparation of old treated plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.
M & L for preparation of old treated plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for prepartion of old painted wooden surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint on wooden surface complete all as specified & directed.
M&L for prepartion of old painted steel surface of any description , not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint on steel surface complete all as specified & directed.
M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces and apply two coats of cement based paint on wall, complete all as specified and as directed.
S & F in repair, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors,complete all as specified and as directed by Engineer-in-charge.
S & F in repair, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed on walls, including PVC clamps etc. complete all as specified and as directed by Engineer-in-charge.
S & F in repair, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or floor, complete all as specified and as directed by Engineer-in-charge.
S & F in repair, 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed on walls, including PVC clamps etc., complete all as specified and as directed by Engineer-in-charge.
S & F in repair, 75mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-charge.
S & F in repair, 110mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-charge.
S & F in repair PVC (SWR) 110 mm bore junction single, (Single T) equal or unequal, complete all as specified and as directed.
S & F in repair PVC (SWR) 75 mm bore junction single, (Single T) equal or unequal, complete all as specified and as directed.
S & F in repair 110mm bore PVC(SWR) vent Cowl complete all as specified and directd.
S & F in repair 75 mm dia outlet PVC(SWR) floor trap plain with steel grating including jointing with solvent cement, complete all as specified and as directed.
S & F 110 mm dia PVC(SWR) WC connector with lip ring, complete all as directed and as specified.
M&L for machine cut kota stone slab flooring 18 mm to 25 mm thick of size not less than 575 mm X 575 mm ,over laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing over & including 20 mm thick screed bed in CM (1:6) complete all as specified & directed.
M&L for machine cut kota stone slab in skirting 18 to 22 mm thick, laid and jointed with grey cement slurry pointed with coloured cement to match the shade of the slab including grinding rubbing & polishing, over and including 10 mm thick backing coat in CM (1:4) etc complete all as specified & directed.
M & L for machine cut kota stone slab flooring 40-50mm thick over & including 20mm thick screed bed in cement mortar (1:4) as in step tread in one piece in one step, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for 16 mm to 18 mm thick Baroda green marble slab of approved type / variety (table rubbed and pre mirror polished) in window cill, jambs, steps, and cooking platforms including pointing in coloured cement to match with shade of Baroda green marble slab including half moulding of Baroda green marble slab edges over & including 20 mm thick screed bed in CM(1:4) for laying of Baroda green marble slab etc complete all as specified and as directed.
S & F 5.5 mm thick plain sheet glass area exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete
M & L 9 mm thick pre laminated particle board ,interior grade ,prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to aluminium frame work
S & F 4mm thick plain sheet glass area n exc 0.5 sqm in each pane and fixed to aluminium frame work complete.
M & L for rounding of edges of Kota/Cuddapah stone slab one edge, such as in steps, cooking platform and other similar work, complete all as specified and as directed.
Dismantling of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floor, aprons, etc., , complete all as specified and directed.
S & F in repair vitreous China squatting pan (Orissa pattern), of size 580x440 mm white with integral foot rests (excluding flusing cistern and flush pipe) including provn of lime concrete and backing joints, connection to trap and flushing pipe anti syphonage pipe etc., complete all as specified and as directed.
Taking down carefully copper/aluminium point wiring (light, fan, socket bell or power) complete with all fitting such as batten, switch, ceiling rose, pendant, regulator, socket and brackets switch fuse etc removing materials from site for taking credit and making good disturbed surfaces of walls, floors etc to match the existing surface all as directed .
Taking down ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Ramgarh, complete all as specified and as directed.
M&L for point wiring for one light/fan/exhaust fan/ bell /buzzer point controlled by one way switch with using with FRLSH PVC insulated unsheathed electric cable conforming to IS:694, 1100V grade AC, single core having multi stranded copper conductor of size 1.5 Sq.mm nominal cross sectional area for phase & neutral and including non metallic rigid PVC conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system & 1.5 Sqmm green PVC insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including sunken type anodized pressed steel sheet terminal box made out of 1.6mm thick of suitable size, for mounting junction boxes with bakelite sheet 2.8 mm thick laminated cover make sheet for housing/fixing switches etc., complete all as specified and directed. Note: Proper colour coding to be adopted.
All as per item No 98 here-in-before but 5 Amp socket outlet on same board.
All as per item No 98 here-in-before but for 5 Amp switch socket on independent board.
M&L for point wiring with FRLSH PVC insulated unsheathed electric cable confirming to IS:694, 1100V grade AC, single core having multi stranded copper conductor of size 2.50 Sq.mm nominal cross sectional area for phase & neutral & including non metallic rigid PVC conduit ISI marked medium grade not less than 25 mm dia with all conduit accessories in concealed wiring system & 2.50 Sq.mm green PVC insulated unsheathed multistranded copper conductor as a earth wire connected to earth dolly by providing lugs including pressed steel anodized sunken boxes 60 mm deep & 1.6 mm thick duly painted inside & anticorrosive outside with Bakelite hylem sheet 2.80 mm thick complete for one six pin switch socket outlet combination ,15 Amps & 5 amp socket point on independent board controlled by one ,one way switch complete all as specified and directed.
S & F switch piano flush button single pole one way 5 Amp, complete all as specified and as directed.
S & F socket outlet 2 in 1, 3 pin, 5Amp, flush type, universal, complete all as specified.
S & F Switch socket combination 2 in 1, 3 pin, 5Amp and 15 Amp flush type, universal, complete all as specified.
S & F Switch socket combination 2 in 1, 3 pin, 5 Amp, flush type, universal, complete all as specified.
Supply and fix ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified.
S & F lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings (ISI marked), complete all as specified.
S & F bell push type single pole one way 5 amps, complete all as specified.
S & F LED Bulb of capacity 10 Watts lumen output (1200) length 102 mm dia 56 mm base capacity B22, (ISI marked) complete with all accessories base (ISI marked)complete all as specified and as directed.d by Engr-in-Charge. Make: Havells / Bajaj/Phillips/Crompton Greaves,
S & F in repair LED light fitting 1 x 22watt , 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting, complete all as specified and as directed by Engr-in-Charge. Make: Havells/Bajaj/Crompton Greaves/Phillips.
S & F in repair LED light fitting 1 x 9W/1x10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. Make: Havell/Bajaj/Phillips/Crompton Greaves.
S & F in repair LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. Make: Havell/Bajaj/Phillips/Crompton Greaves.
S & F in repair wall light retrofit 9 watt LED,aluminium lighting fixture, toughened glass diffuser silicon ,stainless steel screw corrosion and UV Ray resistant coating luminaire IP-65 connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. Make: Havell/Bajaj/Phillips/Crompton Greaves.
Labour only for refixing ceiling fan/exhaust fan obtained from BOQ serial item No. 97 here-in-before, with replacement of unserviceable 3 core, PVC insulated, PVC sheathed 3 core multistranded copper conductor cable with of size 23/0.193 from ceiling rose to fan terminal including overhauling the fan, painting of ceiling fans complete with two coats of synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc., complete all as specified and as directed.
S & F in repair sheet metal enclosures for DBs when MCBs to used single pole and neutral (SPN) double door 240 volts, 8 way with IP-43 IK-09 protection including 200 Amp bus bar and neutral link (ISI marked), complete all as specified and as directed.
S & F in repair 240V, 10 kA 'B' Curve miniature circuit breaker (MCB) of single poles and neutral and current carrying capacity 32 Amp in the MCB DB complete with connection testing and commissioning all as specified and as directed. Make: IndoAsian or its equivalent make in Havells/Standard/L&T.
S & F in repair 240V, 10 kA 'B' Curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp in the MCB DB complete with connection testing and commissioning all as specified and as directed. Make: IndoAsian or its equivalent make in Havells/Standard/L&T.
M & L Sub main wiring two single core 10.0 Sqmm PVC insulated FRLSH multistanderd copper conductor cable and one run of 10.0 Sqmm PVC insulated unsheathed FRLSH multi stranded copper conductor cable for earth wire drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 25 mm dia, complete and making good disturbed surface wall including taking down existing cable complete all as specified and as directed. Note : - 2 runs of 10 Sqmm cable and 1 run of earth wire 10 sqmm and one run of PVC conduit medium grade shall be measured as one unit length.
Supply and laying or fixing or passing through pipe, 1100 volts grade, armoured heavy duty cable with XLPE insulated aluminium conductor 35 Sq mm, 3.5 core nominal cross section in stranded conductor, including testing including taking down existing cable complete all as specified and as directed by Engr-in-Charge.
Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth and getting out for laying cable/pipes as in hard/dense soil, complete all as specified and as directed.
Removing excavated materials n.exc. 50 m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm, complete all as directed.
M & L for sand cushioning for protection of underground cables, consolidated and compacted with clean dry sand all as specified and as directed by Engr-in-Charge. Note: The depth of sand shall be measured after puning only.
M&L for reinforced precast concrete cable cover class LV, type 2, flat, size 250 mm x 150 mm x 40mm all as specified and directed
M&L ,for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and PCC of chamber and coping shall in 1:3:6 type C-1 using 20 mm graded stone aggregate including excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate No 3 of SSR Pt-I, 2009 with CI cover 10mm thick of size 300x300mm with charcoal dust and common salt complete and earth lead connected to panel including testing including taking down existing earthing complete all as specified and directed. Note : Earth test result should be submitted duly tested in the presence of Engr-in-charge.
S & F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 Litre, BEE 5 Star rated, complete with all connected accessories such as safety valve, thermostat, heating element, NRV, connection piece, stop valves, water connection from tank to geyser as required at site etc, complete all as specified and as directed.
S & F metering panel of size 800 mm X600 mm X200 mm ,manufacturing cubical type body made out of 1.60 mm CRCA/HR Sheet,totally enclosed, dust and vermine proof,indoor type suitable for operation on 03 phase and neutral 415 volt 50 Hz AC system(4 metres) including testing and refixing of old meters complete all as specified and as directed inclusive of the following:-Incoming:(a) 63 amp four pole ,16 Ka,MCCB adjustable type thermal magnetic setting-01 No.(b)Rotary handle extended -01 No. (c) Three phase four wire digital type voltmetre -01 N0.(d) Three phase four wire digital yupe amperemeter -01 No. (e) R-phase indication lamp "RED"-01 No.(f)Y-phase indication lamp "YELLOW"-01 No.(g) B-phase indication lamp "BLUE"-01 No.(h) Tape wound CT-60/5AClass-I, 5 V,ID:35-03Nos,Outgoing(a) Compartment feeder -04 Nos(b)32 Amp two pole MCB-04 Nos(c)Busbar Electrolytic tined copper strip for 100 amp TPN with R,Y B & N Colourcoding heat shrinkable sleeves-SET (d) Nuts,bolts,washers, ferrule numbers,cable ties ,tie base ,copper PVC control wire ,copper thimbles,panel locks,I-hooks,PVC tape,insulators,Etype,L-type round tpe ,MCB,channel PVC, Channel connectors, etc -One Set .Note :Contractor must submit GA drawings for approval prior to commencement of work. Make : Indoasian, L&T, C&S
AASHIRWAD ENTERPRISES
Paras Nath Singh
M/s Popatlal A Rathod
M/s friend enterprises
M/s Ray construction
M/S SHAMBHU SHARAN SINGH
upadhyay engineers and consultant
M/S CHAUHAN CONSTRUCTION
M/S KAMLESHWAR SINGH
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .