REPAIR/ MAINT TO BOUNDARY WALL, GATES AND OTHER ALLIED WORK IN THE AREA OF AGE B/R-IV UNDER GE (AWC) MHOW

Amount

M&L brick work with fly ash brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

M&L brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 but except bricks, including dismantled of brick work built in cement mortar complete all as specified and directed. Note:- Bricks obtained from dismantling shall be reused

M & L 15 mm thick rendering on brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement and including taking down cement plaster any description on brick or stone wall complete, all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement complete, all as specified and directed.

M & L precast cement concrete curved stone with solid blocks, exc. 10 cm in width type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 etc. , complete all as specified and directed.

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platform and like, over & including 15mm thick screed bed or bedding layer in cement mortar (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour as per direction of GE, including demolition of stone slabs and tiles of any description or thickness etc. complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron pickets or fencing post or any description etc, all as specified and directed.

S & F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing, and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed

Restraining & resecuring existing galvanised/MS barbed wire straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed

S & F mild steel TMT round bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooking for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete.

Dismantling fencing wire mesh including wires, any type complete.

Supply only chain link MS galavanised fencing any size or type all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F in repair PVC (SWR) pipe 50 mm dia in any length provided as in brick wall as weep hole, complete all as specified and directed.

M & L Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

S&F in repair machine pressed precast concrete 60 mm thick glossy except interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand including demolition of stone slabs and tiles of any description or thickness etc. colour and shape as approved, complete all as specified and directed. (Note : Sand cushioning shall be measured and paid separately) .

M & L PCC 1:2:4 type B-1 using 20 mm graded aggregate as in surface channel and drains etc. with required necessary form work and including demolition of PCC, complete all as specified and directed

S & F Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, wall clading, or as view cutter over the boundary wall, etc. including dismantling of corrugated steel sheeting, complete all as specifed and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5M wide and not exceeding 1.5M in depth not exceeding 10 sqm on plan and getting out complete.

Returning filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete.

Removing surplus excavated material to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete.

S & F Reinforced concrete pipes 450 mm bore, class NP2 , laid and jointed complete with collars, including demolition and breaking up drain pipes, complete all as specified and directed.

S & F Reinforced concrete pipes 300 mm bore, class NP2 , laid and jointed complete with collars, including demolition and breaking up drain pipes, complete all as specified and directed.

M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of cement primer complete all as specified.

M&L preparing of old plastered or unplastered surfaces of walls, cornices etc and applying one coat of cement base paint on old decorated surfaces of wall complete all as specified and directed.

M&L demolition of reinforced cement concrete in any position i.e. floors, structural member, concrete post/poles/pillars etc complete as directed

S & F Joist, channel, angle or tee , fixed indipendently including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts , providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed.(Fe-410-W(Gde-E-250) quality A).

M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand including demolition of tiles of any description or thickness etc. colour and shape as approved, complete all as specified and directed. (Note : Sand cushioning shall be measured and paid separately) .

M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed.

Description as per item no. 10.00, but 5mm dia and over upto and including 10mm dia in stirrups, spacers,distribution and binders

S & F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

Description all as per item No 33.00 above but fixing only Note : Old steel obtained from dismantling item shall be reused.

S & F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5 cm but n. exc. 10 cm long and diameter of neck 11 mm to 15 mm, complete all as specified and as directed.

Dismantling of disturbed existing galvanised steel sheeting from the angle iron picket, MS square tube frame, or any other type of fixing and stacking the same a side or store safely and refixing the same to angle iron pickets or MS steel frame at old/new place after completetion of stone/ Brick wall work in any height , any position, any description, fixed galvanised sheet with coach screws and washers, as in wall clading, roof, or as view cutter over the boudary wall, etc. complete all as specifed and directed.

Dismantling of Concertina coil of any dia and length over existing barbed wire fencing of any height, shape or any place and re laying of concertina coil in old/new location in any dia , any expended length any height , any place and securing two colis each other and to barbed wire with 'U' clips staples , including all necessary securing material complete all as specified and directed.

Dismantling of timber scantlings in fillets, rails, posts, rafters, purlins, etc under 40sqm in section complete as directed

Electromech Engineers (BID ID -3168508)

J B CONSTRUCTION AND DEVLOPERS (BID ID -3168036)

ram prashad chotelal batham (BID ID -3168743)

M/s. Shubh constructions (BID ID -3161146)

M/S Ashish Construction (BID ID -3158016)

MODI CORPORATION (BID ID -3158248)